• 한국주조공학회지
• /
• 제21권2호
• /
• pp.135-140
• /
• 2001

Microstructure of the bell made with Cu-Sn alloys was examined by optical and scanning electron microscope and that analyzed quantitatively with image analyzer. Also acoustic characteristics of the bells were measured in detail by using FFT type power spectrum analyzer. ${\alpha}-single$ phases of large grains only were observed in Cu-5%Sn alloy. However mixed structure of primary ${\alpha}-phase$ and eutectoid of ${\alpha}+{\delta}%_o$ was existed in the Cu-Sn alloys with more than 9%Sn. Also the area fraction of eutectoid phases gradually increased with an increased Sn content. From the result of acoustic test, it was found that frequency and tonal intensity decreased with the increased Sn content from 5%Sn to 11%Sn, and those were rather increased with further increase of that. The lowest frequency and tonal intensity were showed in Cu-11%Sn, and porosity decreased considerably frequency and tonal intensity of the bells.

• 한국전자파학회논문지
• /
• 제28권12호
• /
• pp.964-973
• /
• 2017

본 연구는 공통모드 초크의 기생 성분이 공통모드와 차동모드에 미치는 영향을 광대역에서 분석하고, 간단한 고주파 모델링 방법을 제시한다. 공통모드와 차동모드의 2-port 회로망을 각각 구성하여 각 모드에서의 S-parameter를 Network Analyzer로 측정하였다. 측정 결과로부터 등가회로 소자를 추출하여 고주파 등가회로를 모델링하고, 측정치와 시뮬레이션 결과를 비교함으로써 타당성을 검증하였다. 이는 정확하고 예측 가능한 EMI 필터를 설계하는데 적용될 수 있다.

• Applied Science and Convergence Technology
• /
• 제23권6호
• /
• pp.357-365
• /
• 2014

A non-invasive method for ion energy distribution measurement at a RF biased surface is proposed for monitoring the property of ion bombardments in capacitively coupled plasma sources. To obtain the ion energy distribution, the measured electrode voltage is analyzed based on the circuit model which is developed with the linearized sheath capacitance on the assumption that the RF driven sheath behaves like a simple diode for a bias power whose frequency is much lower than the ion plasma frequency. The method is verified by comparing the ion energy distribution function obtained from the proposed model with the experimental result taken from the ion energy analyzer in a dual cathode capacitively coupled plasma source driven by a 100 MHz source power and a 400 kHz bias power.

• 한국전자파학회논문지
• /
• 제28권11호
• /
• pp.872-879
• /
• 2017

본 논문은 direct digital synthesizer, 연산 증폭기 및 이득/위상 검출기로 구성된 소형 임피던스 분석기를 사용하여 차분 주파수 영역 반사 계측을 기반으로 한 케이블 결함 모니터링 시스템을 제시한다. 제안된 시스템은 주파수 영역 반사계측을 위한 고가의 벡터 네트워크 분석기를 저비용으로 대체할 수 있으므로, 장기간 동안 다중 지점을 모니터링하는 센서 네트워크 구성이 가능하다. 이 시스템의 성능은 전원 케이블의 결함 지점을 진단하는 실험을 통해 검증하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 추계학술대회 논문집
• /
• pp.405-408
• /
• 2000

We designed and fabricated VCO using inductive reactance variation at 2GHz. A varactor diode is one of the main devices in VCO, which varies capacitance depending on reverse voltage. In this paper, a varactor diode is not used as a variable capacitive reactance device but as an inductive device. The circuit design and simulation have been carried out using HP-MDS. The fabricated VCO is measured using the HP 8532B spectrum analyzer and the HP 4352B VCO/PLL analyzer. The experimental result shows the phase noise -110dBc/Hz at a 100kHz offset frequency, the control voltage sensitivity of 23MHz/V and a -3.5dBm output power with a D.C. current consumption of 5.9mA. The simulation and measurements show exact agreement except with regard to the oscillation frequency. The measured oscillation frequency is lower than the simulation result because there is some parasitic inductance in the PCB layout.

• 한국소음진동공학회논문집
• /
• 제15권11호
• /
• pp.1232-1240
• /
• 2005

The purpose of this paper is that investigates the dynamic behavior characteristic of W.T.S (wind turbine system) and carries out the evaluation analysis during operating W.T.S. To investigate the dynamic behavior characteristic of W.T.S, the experiments to measure vibration of the blade from the attached accelerometer on the flap and edge section of the blade that is one of the most important elements of dynamic characteristic of W.T.S are performed. Natural frequency and mode shape are calculated with commercial program ( ANSYS) using the measured vibration acceleration that receives the signal with F.F.T Analyzer from the accelerometer For validation of these experiments, the finite element analysis is performed with commercial F.E.M program (ANSYS) on the basis of the natural frequency and mode shape. The results indicate that experimental values have good agreements with the finite element analysis.

• 센서학회지
• /
• 제9권1호
• /
• pp.28-35
• /
• 2000

본 연구에서는 폴리우레탄 합성반응의 특성을 수정진동자 분석기(QCA)의 공진주파수와 공진저항을 동시에 측정하여 분석하였다. 폴리우레탄 합성반응 초기에 생성된 폴리우레탄이 자동촉매반응을 일으켜 공진주파수가 급격히 감소한다는 것을 알 수 있었다. 프리폴리머(prepolymer, PP) 합성반응에서는 어느 순간 급속히 공진주파수가 감소하다 서서히 안정화되었다. 사슬연장제가 첨가된 세그먼티드 폴리우레탄(segmented polyurethane, SPU) 합성반응에서는 어느 순간 공진주파수가 급속히 감소하다가 다시 증가하였다. 이는 소프트세그먼트(soft segment, SS)에 사슬연장제인 1, 4-butandiol이 반응하여 하드세그먼트(hard segment, HS)로 변화됨으로써 강직한 HS 분자구조의 생성에 따라 공진주파수가 증가하였다고 생각된다. 또한 공진저항은 각각의 메카니즘을 해석하는데 사용하였다. 본 연구 결과, 폴리우레탄의 반응특성을 수정진동자 분석기(QCA)를 이용함으로써 온라인 분석할 수 있었으며, 반응메카니즘을 해석할 수 있었다.

• 대한한의진단학회지
• /
• 제13권2호
• /
• pp.88-116
• /
• 2009

Background : EBM (the evidence based medicine) is the direction of the development for oriental medicine. The pulse meter-analyzer is the important part to standardize the pulse diagnosis. When we set up the direction of the study on the pulse meter-analyzer, the awereness about the pulse meter and analyzer of the clinical oriental medical doctors as consumers is very important. Objectives : In order to prepare for the mutual study and the export strategy on the pulse meter-analyzer of Korea and China, the attitude of the study and the grasp of the awereness about the pulse meter-analyzer of the Chinese medical doctors are very important. Methods : We developed the several items as the important factor of the development of the pulse meter and analyzer. They were translated by chinese medical doctor. The investigation for demend was conducted during 3 months in Guangzhou City, Guangdong Province, China. The results of the investigation was done the statistical method of frequency analysis, Chi-squared test, correspondence analysis. Results : The most important differentiation of symptom is the symptom of JANG-BU(臟腑). The method of the utility in the pulse diagnosis is Chon-Gu (寸口) pulse diagnosis and the research on Chon-Kwan-Cheok(寸關尺) is the most important measurement factor. And the typical the old pulse is the little-fine weak pulse. The pulse meter-analyzer is most suitable to the diagnosis of the hypertension and the arteriosclerosis. Conclusion : The development of the pulse analyzer including the requests of Korean and Chinese medical doctors is very important. Specially the researches on the influence factors of the traditional diagnosis and the environment of the measurement are important for developing the pulse analyze.

• 수산해양기술연구
• /
• 제16권1호
• /
• pp.1-15
• /
• 1980

An underwater recording system was designed to measure the sound spectra of the underwater noises produced by fishing gears in operation. Recorded were noi~es from three types of fishing gears: an anchovy set net, three anchovy boat seine net and a stern trawlnet. Acoustic analysis were made using a heterodyne analyzer, a digital frequency analyzer and a level recorder. The no;'e produced by the anchovy set net was found in the high frequency region of the onset of ambient noise spectrum with a slope of - 6 dB/octave. Here the ambient noise spectrum is higher, though similar in shape, than Knudsen spectrum, and is attributed to the breaking action of the coastal wave. Measured noise spectra during the fishing operations of the anchovy boat seine nets are attributed to the background noise of the sea in the presence of the fishing vessels. The frequency distribution of the noise was 20~5, 000 Hz in the case of two steel anchovy boat seiners, and 20-3,000 Hz in the case of the wooden anchovy boat seiner. The predominant frequency range was 250~350 Hz and maximum sound pressure level was 122 dB (re $1\muPa$) in the case of the steel boat and ] 17 dB in the case of the wooden boat. The noises produced by the trawl fishing gears are remarkably higher than the background noi~e in the presence of the fishing vessel. The frequency distribution of the noi~e was 20-6,300 Hz. The predominant frequency range was 100~200 Hz and maximum sound pressure level was 137 dB ( re $1\muPa$) . The noise spectra were not so much different from that caused by vibrations of the towing cable and the structure of the ground rope of the trawl net towed in an experimental tank.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
• /
• pp.150-150
• /
• 2011

Electron-neutral collision frequency is one of the important parameters in the plasma physics. Recently, It is employed to monitor the plasma processing in industrial plasma engineering [1]. Using the wave-cutoff probe with network analyzer, the plasma impedance was measured in inductively coupled argon plasma and analyzed to determine the resonance frequency. The electron-neutral collision frequency is directly calculated from the resonance frequency. The calculated electron-neutral collision frequency is good agree with reference which is calculated by measured EEDF using single langmuir probe (SLP).