• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.11
• /
• pp.83-94
• /
• 2003

In this paper. a highly linear and low glitch CMOS current mode digital-to-analog converter (DAC) by self calibration bias circuit is proposed. The architecture of the DAC is based on a current steering 6＋4 segmented type and new switching scheme for the current cell matrix, which reduced non-linearity error and graded error. In order to achieve a high performance DAC . novel current cell with a low spurious deglitching circuit and a new inverse thermometer decoder are proposed. The prototype DAC was implemented in a 0.35${\mu}{\textrm}{m}$ n-well CMOS technology. Experimental result show that SFDR is 60 ㏈ when sampling frequency is 32MHz and DAC output frequency is 7.92MHz. The DAC dissipates 46 mW at a 3.3 Volt single power supply and occupies a chip area of 1350${\mu}{\textrm}{m}$ ${\times}$750${\mu}{\textrm}{m}$.

• Journal of Korean Medicine for Obesity Research
• /
• v.3 no.1
• /
• pp.7-16
• /
• 2003

Objectives : The lipolytic effects of catecholamines in adipose tissue are mediated by members of adrenergic receptors. This study was conducted to examine the effects of ${\beta}2-AR$ Gln27Glu (Q27E) polymorphism on obesity indices and risk among obesity clinic patients. Methods : 532 subjects, 38 men and 494 women, who attended a weight loss program in a local obesity clinic were analyzed. Height, weight, BMI, WHR and obesity index were measured or calculated. Body composition was measured by bio-impedance analysis. Genotype of ${\beta}2-AR$ polymorphism in codon 27 was analyzed by PCR-RFLP method. Serum concentrations of fasting glucose, total and HDL cholesterol, and triglyceride were determined by autobiochemical analyzer. Results: The Genotype distributions of ${\beta}2-AR$ gene were QQ type 81.3%, QE type 17.9% and EE type 8%. Therefore, the frequency of E allele of ${\beta}2-AR$ gene was 0.170 in the total subjects. The frequency of the ${\beta}2-AR$ variant genotype(QE+EE) was significantly higher in obese group($BMI{\geqq}25$) compared with non-obese group(p=0.027). Weight was significantly higher in variant(QE+EE) type compared with normal(QQ) type in total subjects(p=0.001), male(p=0.022) and female(p=0.013). BMI, obesity index and WHR were also significantly higher in QE+EE type. Body fat man was significantly higher in QE+EE type in total subjects(p=0.005) and female(p=0.027). When forward stepwise regression analysis was used to create a model of risk predictors of obesity($BMI{\geqq}25$), QE+EE type of ${\beta}2-AR$ gene was found to be a significant risk factor for obesity (p=0.042, ORs 1.597). Conclusions: QE+EE genotype of ${\beta}2-AR$ was associated with increased obesity indices and might be a significant risk factor for obesity.

• Composites Research
• /
• v.19 no.5
• /
• pp.28-33
• /
• 2006

In this paper, we have studied the complex permittivities and their influence on the design of microwave absorbers of E-glass fabric/epoxy composite laminates containing three different types of carbon-based nano conductive fillers such as carbon black (CB), carbon nano fiber (CNF) and multi-wall nano tube (MWNT). The measurements were performed fur permittivities at the frequency band of 0.5 GHz$\sim$18.0 GHz using a vector network analyzer with a 7 mm coaxial air line. The experimental results show that the complex permittivities of the composites depend strongly on the natures and concentrations of the conductive fillers. The real and imaginary parts of the complex permittivities of the composites were proportional to the filler concentrations. But, depending on the types of fillers and frequency band, the increasing rates of the real and imaginary parts with respect to the filler concentrations were all different. These different rates can have an effect on the thickness in designing the single layer microwave absorbers. The effect of the different rates at 10 GHz was examined by using Cole-Cole plot; the plot is composed of a single layer absorber solution line and measured permittivities from these three types of composites. Single layer absorbers of 3 different thicknesses using carbon nano materials were fabricated and the -10 dB band of absorbing performances were all about 3 GHz.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.14 no.1
• /
• pp.15-36
• /
• 1978

Underwater sounds of some fishes and crabs were analyzed in the laboratory. The behavioral responses to the playback sounds of their feeding and croaking sound were investigated. The samples used in the experiment were as follows: Nibea albiflora, seriola quinqueradiata, Navodon modestus, Fugu xanthopterus, chrysophrys major, Scylla serrata, Telmessus acutidens, Charybdis japonica, and Portunus trituberculatus. The feeding and croaking sounds of the samples were recorded by a tape recorder through a hydrophone in an anechoic aquarium. The sound intensity level was measured by means of a sound level meter at an anechoic chamber. The frequency, intensity and wave form of various sounds were analyzed with an analyzing system consisting of a 1/3 octave filter set, a high speed level recorder, an amplifier, an octave band analyzer and an oscilloscope. The most successful recording was edited into a sequence of sound track which repeats sound emitting for 5 to 7 seconds after pausing for 5 to 7 seconds. The sequence was then reproduced into an anechoic aquarium through the under water speaker. The experimental anechoic aquarium used for the sample fishes was divided into the four sections with any three screens selected from 40$\times$40mm, 60$\times$60mm, 80$\times$80mm and 100$\times$100mm mushes according to the species of the fishes, besides that for crabs were not sectioned. The results of the investigation are as follows: 1. Of the feeding sound of fish, the frequency of wave from of the sound produced by Nibea albiflora and seriola quinqucradiata was 125～250Hz, that by Navodon modestus 63～125Hz, and that by Fugu xanthopterus 400～500Hz. The pressure level of the feeding sound produced by Nibea albiflora and Seriola quinqueradiata was 56～62db, that by Navodon modestus 57～59db, and that by Fugu xanthopterus 60～64db. 2. Of the croaking sound of Nibea albiflora, the frequency of the sound was 125～250Hz almost equivalent to that of feeding sound, and the pressure level was 62～63db, slightly higher than that of feeding sound. 3. Of the croaking sounds of crabs, the frequency of the sound produced by scylla serrata was 125～250Hz, that by Charybdis japonica and Telmessus acutidens 500～1,000Hz, and that by Portunus trituberculatus 250～500Hz. The pressure level of the croaking sound by Scylla serrata was 68～70db, and that by Charybdis japonica, Telmessus acutidens and Portuens trituberculatus 50～62db. 4. Phonotactic responses of Nibea albiflora and Seriola quinqueradiata to the feeding sounds produced by their own species, the same body length were conspicuous with the phonotactic index of 56～87%, but that of Navodon modestus, Chrysophrys major and Fugu xanthopterus were hardly recognized. 5. Phonotactic responses of the sample fishes to the sinusoidal sound with the frequency range of 50 to 9,000 Hz were observed not conspicuous. 6. Phonotactic responses of Portunus trituberculatus to the croaking sounds produced by their own species was varied in the range of 40～100%, according to the carapace length and the sex.

• Journal of Genetic Medicine
• /
• v.6 no.1
• /
• pp.56-61
• /
• 2009

Purpose: Preeclampsia is a multifactorial disorder with genetic and environmental components. Recently, the STOX1 gene, identified as a candidate gene for preeclampsia in Dutch women, has been shown to be placentally expressed and subject to imprinting with preferential transmission of the maternal allele. The purpose of this study is to investigate whether there is an association between the STOX1 Y153H variation and preeclampsia in Korean pregnant women. Materials and Methods: This study involved 202 preeclamptic and 204 healthy pregnant women who were genotyped for the Y153H variant of the STOX1 gene using a commercially available SNapShot assay kit and an ABI Prism 3730 DNA Analyzer. Results: There were no significant differences in genotype frequencies of the Y153H variant of the STOX1 gene between preeclamptic patients and normal controls (P>0.05). The H allele frequency of the STOX1 Y153H variation was similar in patients with preeclampsia (87.1%) and in normal controls (86.5%). In addition, multiple logistic regression analysis showed that the YH, HH, and YH/HH genotypes were not associated with an increased risk of preeclampsia when compared to the YY genotype. Conclusion: This is the first study to characterize the Y153H variant of the STOX1 gene in Korean patients with preeclampsia. We found no differences in the genotype and allele frequencies between preeclamptic and normal pregnancies. Although limited by a relatively small sample size, our study suggests that the STOX1 Y153H variation is not associated with the development of preeclampsia in Korean pregnant women.

• Tuberculosis and Respiratory Diseases
• /
• v.63 no.2
• /
• pp.128-138
• /
• 2007

Backgrounds: Mutations of katG and inhA (ORF and promoter) are known to be related to isoniazid (INH) resistance of Mycobacterium tuberculosis. Because reports on these mutations in Korean isolates are limited (i.e. only the frequency of katG codon 463 was evaluated.), we tried to know the kinds of mutations of two genes and their frequencies in INH resistant Korean M. tuberculosis strains. Methods: PCR was performed to amplify katG (2,223 bp), inhA ORF (-77~897, 975 bp), and inhA promoter (-168~80, 248 bp) from 29 multidrug resistant M. tuberculosis (MDR-TB) DNAs prepared by bead beater-phenol method. Their sequences were determined and analyzed by ABI PRISM 3730 XL Analyzer and MegAlign package program, respectively. Results: All of the isolates had more than one mutation in katG or inhA gene. Twenty seven (93%) of 29 tested strains had katG mutations, which suggests that katG is a critical gene determining INH resistance of M. tuberculosis. Amino acid substitutions, such as Arg463Leu and Ser315Thr, due to point mutations of the katG were the most frequent (62.1% and 55.2%) mutations. In addition, deletion of the katG gene was frequently observed (17.2%). Analyzed Korean MDR-TB isolates also had variable inhA mutations. Point mutation of inhA promoter region, such as -15 ($C{\rightarrow}T$) was frequently found. Substitution of amino acid (Lsy8Asn) due to point mutation ($AAA{\rightarrow}AAC$) of inhA ORF was found in 1 isolate. Interestingly, 14 point mutated types that were not previously reported were newly found. While four types resulted in amino acid change, the others were silent mutations. Conclusions: Although it is not clear that the relationship of these newly found mutations with INH resistance, they show marked diversity in Korean MDR-TB strains. It also suggests their feasibility as a molecular target to supplement determining the INH resistance of clinical isolates because of the possible existence of low-level INH resistant strains.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.3
• /
• pp.83-91
• /
• 2019

The purpose of this study is to assess a fire-damaged concrete structure using a digital camera and image processing software. To simulate it, mortar and paste samples of W/C=0.5(general strength) and 0.3(high strength) were put into an electric furnace and simulated from $100^{\circ}C$ to $1000^{\circ}C$. Here, the paste was processed into a powder to measure CIELAB chromaticity, and the samples were taken with a digital camera. The RGB chromaticity was measured by color intensity analyzer software. As a result, the residual compressive strength of W/C=0.5 and 0.3 was 87.2 % and 86.7 % at the heating temperature of $400^{\circ}C$. However there was a sudden decrease in strength at the temperature above $500^{\circ}C$, while the residual compressive strength of W/C=0.5 and 0.3 was 55.2 % and 51.9 % of residual strength. At the temperature $700^{\circ}C$ or higher, W/C=0.5 and W/C=0.3 show 26.3% and 27.8% of residual strength, so that the durability of the structure could not be secured. The results of $L^*a^*b$ color analysis show that $b^*$ increases rapidly after $700^{\circ}C$. It is analyzed that the intensity of yellow becomes strong after $700^{\circ}C$. Further, the RGB analysis found that the histogram kurtosis and frequency of Red and Green increases after $700^{\circ}C$. It is analyzed that number of Red and Green pixels are increased. Therefore, it is deemed possible to estimate the degree of damage by checking the change in yellow($b^*$ or R+G) when analyzing the chromaticity of the fire-damaged concrete structures.

• Journal of Korean Biological Nursing Science
• /
• v.2 no.2
• /
• pp.20-37
• /
• 2000

The purpose of this study was to investigate the relationships between the differentials in life styles and their effect on the epidermal facial tissue in order to provide a basis for health professionals so that they might better be able to maintain and promote healthy skin care and further delay the premature ageing of the epidermal facial tissue. The subjects consisted of 145 females of various ages who visited skin care room in cerming health promoting behaviors(Park In sook's Profile) and questions on their behavioral practices pertaining to personal skin care were used. The investigation also ess of the four parts of the epidermal facial tissue studied. All data collected wee entered into the SAS program and analyzed for frequency, percentages, the utilized Pusan. The study dates ranged from May 1, 1998 to May 30, 1998. The methods used for this investigation were a questionnaire survey consisting of general objective questions. The questions con a "skin analyzer" to measured levels of moisturizing hydrated, facial oils, and roughnmean, t-test, ANOVA, and Pearson Correlation Coefficients. The results of this study were as follows ; 1. Epidermal facial oil was at its highest levels in the chin area with additional decreasing levels in the forehead and nose regions. The least regions were those of the cheeks. The highest levels of hydration on the other hand started with the forehead followed by the area of the chin, the cheeks and the lowest level of epidermal facial hydration was in the region of the nose. 2. The average score of the performance in the health promoting behaviors variable was 139.51. The variables with the highest degree of the performance were rest and sleeping(35.71). The lowest degree was hiegenic life(23.44). 3. The relationship health promoting behaviors and epidermal condition was not correlated with oil, hydration and roughness of the skin surface. 4. Skin care behavioral characteristics related to epidermal condition were washing style and temperature of washing water. 5. General characteristics related to epidermal condition were occupation, education level, acne and melasma. In conclusion, this study showed that several factors were significant in the behavior of skin care. Clear knowledge of both internal and external factors which affect the epidermal condition will help women to pursue active and appropriate practices in their health behaviors and skin care.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.5 s.335
• /
• pp.31-38
• /
• 2005

The architecture and the implementation details of a UTMI(USB2.0 Transceiver Macrocell Interface) compatible USB2.0 transceiver chip were presented. To confirm the validation of the incoming data in noisy channel environment, a squelch state detector and a current mode Schmitt-trigger circuit were proposed. A current mode output driver to transmit 480Mbps data on the USB cable was designed and an on-die termination(ODT) which is controlled by a replica bias circuit was presented. In the USB system using plesiochronous clocking, to compensate for the frequency difference between a transmitter and a receiver, a synchronizer using clock data recovery circuit and FIFO was designed. The USB cable was modeled as the lossy transmission line model(W model) for circuit simulation by using a network analyzer measurements. The USB2.0 PHY chip was implemented by using 0.25um CMOS process and test results were presented. The core area excluding the IO pads was $0.91{\times}1.82mm^2$. The power consumptions at the supply voltage of 2.5V were 245mW and 150mW for high-speed and full-speed operations, respectively.

• Journal of the Korean Wood Science and Technology
• /
• v.16 no.3
• /
• pp.48-64
• /
• 1988

This study was carried out to investigate the free vibrational properties of traditional and replaceable species for sounding board, using piezoelectrical accelerometer and signal analyzer. In the study, the frequency equations of free-free beam carrying a concentrated mass in the transverse vibration and of free-mass beam in the longitudinal vibration were used. The results obtained were as follows. 1. Average values of dynamic modulus of rigidity of Korean commercial species measured were as follows. Paulownia tomatosa (Thunb.) Steudel: $5.590\times10^9\;dyne/cm^2$ Tilia amurensis Rupr.: $5.414\times10^9\;dyne/cm^2$ Macckia amurensis Rupr.: $10.044\times10^9\;dyne/cm^2$ Fraxinus mandshurica Rupr.: $8.876\times10^9\;dyne/cm^2$ Ulmus davidiana var.japonica Nakai: $8.677\times10^9\;dyne/cm^2$ Pinus rigida Miller: $6.33\times10^9\;dyne/cm^2$ Fraxinus rhynchophylla Hance: $4.666\times10^9\;dyne/cm^2$ 2. The ratio of dynamic transverse Young's modulus to dynamic modulus of rigidity, $E_T/G_{LT}$, was 24.922 for Fraxinus rhynchophylla Hance, which was the highest, 7.317 for Paulownia tomentosa (Thunb.) Steudel, which was the lowest among Korean commercial species measured. 3. The value of longitudinal dynamic Young's modulus was about 3.7% and 19.8%, respectively, higher than those of transverse dynamic and static Young's modulus. The value of transverse dynamic Young's modulus was about 15.5% higher than that of static Young's modulus. 4. Predicted value of MOR in terms of correlation coefficient by transverse dynamic Young's modulus was slightly higher than that of static Young's modulus, but no significance was found out. 5. Transverse dynamic Youne's modulus was $(2.002\pm0.288)\times10^{11}\;dyne/cm^2$ for Fraxinus mandshurlca Rupr., which was the highest, $(0.601\pm0.100)\times10^{11}\;dyne/cm^2$ for Paulownia tomentosa (Thunb.) Steudel, which was the lowest among Korean commercial species measured. The sound velocity of sitka spruce was 5,685 m/sec, which was the highest. 6. Internal friction of Paulownia tomentosa (Thunb.) Steudel was shown the lowest value among Korean commercial species, $(8.795\pm1.795)\times10^{-3}$, but was higher than that of sitka spruce, $(7.331\pm0.991)\times10^{-3}$. Internal friction was shown negative correlation with density and dynamic Young's modulus, respectively. 7. K value was affected largely by internal friction and was the highest, $2.225\times10^8$ for Paulownia tomentosa (Thunb.) Steudel and was the lowest, $0.550\times10^8$ for Fraxinus rhynchophylla Hance. K value of Paulownia tomentosa (Thunb.) Steudel was higher than that of sitka spruce and K values of melapi and cottonwood, which have been considered to be replaceable species with sitka spruce in the piano industry, were lower than those of Paulownia tomentosa (Thunb.) Steudel and mill amurensis Rupr.