• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.1
• /
• pp.38-46
• /
• 1992

In this thesis, a high speed code synchronization circuit is implemented, which is applicable to frequency hopping FSK tranceiver within 68-88 MIBz band- width. synchronization Process consists of two steps, initial synchronization and tracking. A modified matched filter method using two channel passive correlators matched with short hopping frequencies, synchronization prcfix. is proposed for initial synchronization. To increase probability of initial synchronization, prefix are transmitted repeatedly. The outputs of correlators are sent to synchronization decision circuit, and code start time Is extracted by synchronizatlon decision circuit-Modified matched fitter method makes it possible to reduce complexity in hardware and obtain code acquisition rapidly.Clock recovery circuit regenerates PN code clock for tracking.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.5 no.4
• /
• pp.234-242
• /
• 2010

Two-way ranging methods such as TWR and SDS-TWR have been considered for many ranging systems because these methods are useful in the absence of synchronization. To estimate the location of a mobile node, complicated ranging procedures consisting of ranging frames between an anchor node and the mobile node are performed. Supporting multiple mobile nodes such as a few hundreds or thousands and several anchor nodes, the ranging procedures have the fatal disadvantage of processing delay and inefficient traffic bandwidth. On the other hand, the one-way ranging method is simple and fast, but susceptible to network synchronization. In this paper, we propose a method to modify asynchronous ranging equations to establish exact frequency or frequency offset, a method to estimate frequencies or frequency offsets, and a method to establish post-facto synchronization with anchor nodes. The synchronization for a node pair is adapted using instantaneous time information and corresponding difference of distances can be determined. We evaluate the performance of TWR, SDS-TWR and proposed ranging algorithms.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.7
• /
• pp.3-9
• /
• 2015

In this paper, we propose an initial timing and frequency synchronization scheme for low probability detection (LPD) systems with cyclic code shift keying (CCSK). The performance of the LPD system with CCSK highly depend on initial timing and frequency offset. On the other hand, the operating SNR (Signal-to-Noise Ratio) of LPD systems is usually very low. Hence, to guarantee a reliable performance of the LPD system, it is crucial to develop suitable initial synchronization algorithms. In this paper, we propose an initial timing and frequency synchronization scheme suitable for CCSK based LPD system using a repeated preamble pattern.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.9
• /
• pp.3-10
• /
• 2014

The synchronization signal in Long Term Evolution (LTE) systems contains the primary synchronization signal (PSS) and the secondary synchronization signal (SSS), and the overall synchronization performance is dominated by PSS detection. In this paper, we propose a PSS detection scheme employing three partial correlation based PSS detectors with different partial correlation lengths, in which calculated partial correlation values are reused in order to reduce computational complexity. A coherent selection scheme using tentative frequency offsets is also proposed to select one reliable result from outputs of partial correlation based PSS detectors. It is shown through computer simulation that the proposed scheme can have a robust detection performance in wide range of frequency offsets.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.6C
• /
• pp.572-579
• /
• 2010

Filtered multi-tone (FMT) is a form of multicarrier modulation utilizing frequency-domain equalization efficient in multi-path fading channels. Doppler frequency information can be employed for channel estimation and link adaptation to improve the performance. However, most previous studies have concentrated on the orthogonal frequency division multiplexing (OFDM) instead of FMT. Moreover, they have not considered the synchronization error that can commonly occur in practical systems. In this paper, we propose Doppler frequency estimation scheme that is effective in FMT systems with residual synchronization error and high noise levels.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.2
• /
• pp.66-72
• /
• 2009

In this paper, an efficient frequency offset synchronization structure for OFDM(Orthogonal Frequency Division Multiplexing) is proposed. Conventional CORDIC(Coordinate Rotation Digital Computer) algorithm for frequency offset synchronization utilizes two CORDIC hardware i.e., one is vector mode for phase estimation, the other is rotation mode for compensation. But proposed structure utilizes one CORDIC hardware and divider. Through simulation, it is shown that hardware implementation complexity is reduced compared with conventional structures. The Verilog-HDL coding and front-end chip implementation results for the proposed structure show 22.1% gate count reduction comparison with those of the conventional structure.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.45 no.5
• /
• pp.118-125
• /
• 2008

In this paper, an efficient frequency offset synchronization structure for OFDM(Orthogonal Frequency Division Multiplexing) is proposed. Conventional CORDIC(Coordinate Rotation Digital Computer) algorithm for frequency offset synchronization utilizes two CORDIC hardware i.e., one is vector mode for phase estimation, the other is rotation mode for compensation. But proposed structure utilizes one CORDIC hardware and divider. Through simulation, it is shown that hardware implementation complexity is reduced compared with conventional structures. The Verilog-HDL coding and front-end chip implementation results for the proposed structure show 22.1% gate count reduction comparison with those of the conventional structure.

• Journal of Communications and Networks
• /
• v.6 no.2
• /
• pp.112-122
• /
• 2004

A nonlinear spectral-line method utilizing the fourth absolute moment of the receiver discrete Fourier transform output is proposed as a non-data-aided fine carrier frequency synchronization algorithm for OFDM receivers. A simple modification of the algorithm resulting in low implementation complexity is also developed. Analytic expressions are derived for the steady-state frequency error variances of the algorithms and verified to be very accurate via computer simulations over AWGN and frequency selective multipath channels. Numerical results show that the proposed algorithms provide reliable and excellent steady-state performance, especially with PSK modulation. Also, the proposed algorithms are insensitive to symbol timing offsets, only requiring a coarse symbol timing recovery.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.7
• /
• pp.4871-4877
• /
• 2015

This article presents a circuit and a system for IEEE 1588 based clock synchronization to generate a very accurate frequency signal required in femtocell devices. A prototype board and the experimental environment to verify the functions and to evaluate the performance are explained to verify the feasibility of the proposed synchronization system. To make low-cost femtocells without constraints on the place of installation, it is very important to study on the practical implementation of synchronization system based on IEEE 1588. The experimental result shows that the synchronization errors between -16 ns and 9 ns are guaranteed over the network of femtocell devices with the proposed synchronization circuits, thus the synchronization criteria of the 3GPP HNB are met.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.1B
• /
• pp.79-89
• /
• 2002

A synchronization method is presented for IEEE 802.11a wireless OFDM system. First the coarse symbol synchronization is achieved by measuring the moving power average of the received envelope signal. The detection probabilities and optimum thresholds for the symbol synchronization are derived. By measuring the correlation between the short training signal and received envelope signal, fine symbol synchronization can be acquired. And the frequency synchronization is achieved using long training signal. A symbol synchronization error causes a phase rotation of the constellation. After the compensation for fading channel, the rotation due to the symbol timing error can be corrected. With this method, synchronization can be well achieved over frequency selective channels.