• Journal of Power Electronics
• /
• v.9 no.2
• /
• pp.146-155
• /
• 2009

The static frequency converter (SFC) systems are used as a method of driving large synchronous machines in many power and industrial plants. In this paper, new control algorithms of SFC systems for starting gas turbo sets are proposed for a four quadrant operation: start-up at standstill; an acceleration up to the speed of the rated voltage; field weakening to reach the rated speed; synchronization to the main alternating current (AC) source; and dynamic braking to stop safely within the rating of the synchronous machine. Experimental results show that the proposed algorithms are proper and effective.

• ETRI Journal
• /
• v.33 no.4
• /
• pp.633-636
• /
• 2011

In this letter, we propose an overlaid hybrid division duplex (HDD) concept for cellular systems which divides a cell into inner and outer regions and utilizes the merits of both time division duplex (TDD) and frequency division duplex (FDD). The proposed system can take advantage of both TDD and FDD without handover between two duplex schemes. Moreover, it is shown that the proposed HDD system outperforms the conventional TDD or FDD system with mobile relay stations when the synchronization issue is considered in orthogonal frequency division multiple access systems. Thus, the proposed overlaid HDD can be considered as a new framework for future cellular systems.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.9B
• /
• pp.1795-1805
• /
• 1999

In an OFDM (Orthogonal Frequency-Division Multiplexing) system, the sampling frequency offset between the transmitter and receiver is known to cause the interchannel interference (ICI), resulting in performance degradation. In this paper, we propose two time-domain techniques to estimate the sampling frequency offset, especially for a high data-rate OFDM system. The first technique estimates the sampling frequency offset by using the phase difference between two received samples with a fixed amount of time interval, corresponding to the transmitted training symbol, under the assumption of perfect symbol and carrier offset synchronization. The second technique estimates the sampling frequency offset and carrier frequency offset jointly, when the two offsets exist together, by using two training symbols with different frequency components and using a sample algebraic calculation. The proposed estimation techniques for sampling frequency offset cause no time delay due to all time-domain processing, and have a good performance due to no ICI effect. The performances of the proposed techniques are demonstrated by various simulations.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.10A
• /
• pp.922-929
• /
• 2005

This paper proposes an adaptive pilot beacon equipment for mobile communication systems based on direct spread spectrum technology which generates the pilot channel for handoff between base stations by using the information acquired from the downstream wireless signal regarding the overhead channel information. Such an adaptive pilot beacon equipment will enable low power operation since among the wireless signals, only the pilot channel will be generated and transmitted. The pilot channel in the downstream link of the CDMA receiver is used to acquire time and frequency synchronization and this is used to calibrate the offset for the beacon, which implies that time synchronization using GPS is not required and any location where forward receive signal can be received can be used as the installation site. The downstream link pilot signal searching within the CDMA receiver is performed by FPGA and DSP. The FPGA is used to perform the initial synchronization for the pilot searcher and DSP is used to perform the offset correction between beacon clock and base station clock. The CDMA transmitter the adaptive pilot beacon equipment will use the timing offset information in the pilot channel acquired from the CDMA receiver and generate the downstream link pilot signal synchronized to the base station. The intermediate frequency signal is passed through the FIR filter and subsequently upconverted and amplified before being radiated through the antenna.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.9
• /
• pp.1699-1709
• /
• 2015

Moving terminals like high-speed-train undergo high Doppler frequency shift, and this leads to carrier frequency offsets that have to be compensated to avoid degradation of communication performance. In multiple access mechanism like OFDMA, base-stations need complex hardware to compensate the uplink frequency offset. In this paper, we propose a method, which can reduce burden of the base-station and makes frequency offset estimation and compensation simple. This method contains transmitting new synchronization signal, estimating frequency offsets in base-station, transmitting feedback information to terminal, and compensating the offset in uplink transmission. Simulation results show the proposed method operates well in high Doppler frequency shift conditions of 500 km/h which is the requirements of 5G mobile communication.

• The KIPS Transactions:PartC
• /
• v.13C no.6 s.109
• /
• pp.677-684
• /
• 2006

This paper investigates the link margin of MB-OFDM UWB system quantitatively. Various simulations are performed considering the implementation loss by imperfect synchronization unit and the effect of multi-path fading channels. MB-OFDM UWB system uses ZP(Zero Padding) instead of CP(Cyclic Prefix) and supports two transmission modes; one is TFI(Time Frequency Interleaving) mode that transmits OFDM symbols using different carrier frequency from symbol to symbol according to Time Frequency(TF) codes, the other is FFI(Fixed Frequency Interleaving) mode that transmits OFDM symbols using a specific carrier frequency. The advantage of if and TFI is to be able to increase the transmitting power effectively compared to the existed OFDM systems that transmit the signal continuously at the same average transmitting power. From the analysis results of Ink margin, to guarantee the service range of 4m in 200Mbps mode, TFI mode must necessarily be implemented and the service range of 480Mbps mode is estimated about 1-2m in the line-of-sight multi-path channel (CMI).

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.6A
• /
• pp.592-598
• /
• 2008

In this paper, a novel pilot-aided integer frequency offset estimation scheme is proposed for orthogonal Sequency division multiplexing (OFDM)-based digital video broadcasting (DVB) systems. The conventional pilot-aided integer frequency offset estimation scheme proposed for OFDM-based DVB systems exploits the partial information of combinations provided by pilots. Thus, in this paper, we propose a novel integer frequency offset estimation scheme exploiting all information of pilot combinations. To compare the performance of the proposed scheme with that of the conventional scheme, we conduct a simulation in additive white Gaussian noise (AWGN) and multipath Rayleigh channels, which shows that the proposed scheme outperforms the conventional scheme in terms of the probability of integer frequency offset estimation failure.

• The KIPS Transactions:PartC
• /
• v.15C no.1
• /
• pp.31-36
• /
• 2008

The clock frequency difference of sensor nodes is one of main parameters in TOF estimation and affect to degrade ranging algorithms to estimate positions of mobile nodes in wireless sensor networks. The specification of IEEE802.15.4a describes asynchronous TWR and SDS-TWR insensitive to frequency difference without any additional network synchronization. But the TWR and SDS-TWR can not eliminate sufficiently the effect of frequency difference of node pair, packet processing delay and its difference. Especially use of low cost oscillator with wide range offset, sensor node with different hardware and software can make the positioning errors worse. We propose an estimation method of frequency differences, and apply the measured frequency differences to TWR and SDS-TWR. We evaluate the performance of the proposed algorithm with simulation, and make certain that the proposed method enhances the performance of existing algorithms with positioning errors less than 25 cm.

• Journal of Positioning, Navigation, and Timing
• /
• v.12 no.3
• /
• pp.245-255
• /
• 2023

Time comparison techniques are necessary for generating and keeping Coordinated Universal Time (UTC) and distributing standard time clocks. Global Navigation Satellite System (GNSS) Common View, GNSS All-in-View, Two-Way Satellite Time and Frequency Transfer (TWSTFT), Very Long Baseline Interferometry (VLBI), optical fiber, and Network Time Protocol (NTP) based methods have been used for time comparison. In these methods, GNSS based time comparison techniques are widely used for time synchronization in critical national infrastructures and in common areas of application such as finance, military, and wireless communication. However, GNSS-based time comparison techniques are vulnerable to jamming or interference environments and it is difficult to respond to GNSS signal disconnection according to the international situation. In response, in this paper, Code-Division Multiple Access (CDMA) based All-to-All TWSTFT operation method is proposed. A software-based simulation platform also was designed for performance analysis in multi-TWSTFT signal environments. Furthermore, code and carrier measurement jitters were calculated in multi-signal environments using the designed simulation platform. By using the technique proposed in this paper, it is anticipated that the TWSTFT-based time comparison method will be used in various fields and satisfy high-performance requirements such as those of a GNSS master station and power plant network reference station.