• Journal of Power Electronics
• /
• v.10 no.6
• /
• pp.762-768
• /
• 2010

This paper describes the development of a new islanding detection method for inverter-based distributed generation systems, which uses a signal cross-correlation scheme between the injected reactive current and the power frequency deviation. The proposed method injects 1% of the reactive current to the rated current which brings about a negligible degradation of the power quality. It discriminates the islanding state, when the calculated cross-correlation index is larger than 0.5. The operational feasibility was verified through computer simulations with PSCAD/EMTDC software and experimental research with a hardware prototype. The proposed method can detect the islanding state without degrading the power quality at the point of common connection. Further study is required to overcome the cancellation of the injected reactive current from multiple distributed generation units interconnected with the utility grid.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.19 no.4
• /
• pp.303-311
• /
• 2014

This paper shows the test result of 2MVA BESS(Battery Energy Storage System) with wind-turbine in micro-grid of the Gapado. To implement of micro-grid with BESS, characteristics of generator and customer load in grid are considered. Also, to operate of 2-parallel PCU(Power Conversion Unit) in BESS, the droop control is adopted with operating mode of grid independent. Performances of BESS with wind-turbine were verified by analysis of power quality such as voltage harmonics, ratio of voltage and frequency regulation, and by measurement of waveform such as output voltage and current.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1008-1010
• /
• 2005

In the examination of steam generator(SG) tube in nuclear power plant, eddy current testing probes play an important role in detecting the defects. Bobbin probe and MRPC probe is usually used for the inspection of SG tube. Bobbin probe is good at high speed inspection, but ability of detection of circumferential defect is very weak. On the contrary MRPC probe, which moves for inspection in the direction of axial and circumferential simultaneously, has very slow inspection speed, but it has excellent detection capability for small cracks, which is hardly detected by bobbin probe. In this paper, for the accurate analysis of experimental ECT signals, construction of MRPC probe signals database according to the variation of defect size is the main purpose. Using 3-D finite element method, ECT signals are analyzed, and signals analysis add according to frequency ingredient. The results, which are analysis and characteristics ion of electromagnetism simulation signals, is databased.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.20 no.3
• /
• pp.215-222
• /
• 2010

Long and slender body, like a fuel rod, oscillating in axial flow can be unstabilized even by the small cross flow which can be activated by the flow mixer or turbulent generator. It is important to include these effects of flow disturbance in dynamic stability analysis of nuclear fuel rod. This work shows how eigen frequency of a multi-span fuel rod can be changed by the swirl flow, which is discretely generated by a flow mixer. By solving a state-space form of the eigenvalue equation for a multi-span fuel rod system, the critical velocity at which a fuel rod becomes unstable was calculated. Based on the simulation results, we evaluated how stability of a multi-spanned nuclear fuel rod with mixing vanes can be affected by the coolant flow in an operating reactor core.

• Journal of Power Electronics
• /
• v.17 no.4
• /
• pp.1117-1126
• /
• 2017

The main contribution of this paper is the use of sensorless active diodes to generate the gate signals for a three-phase boost-rectifier with a self-powered control scheme. The sensorless operation is achieved making use of the gate control signals generated by the active diode schemes on each of the switching devices using a pulse width half-controlled boost rectifier modulation technique (PWM-HCBR). The proposed scheme synchronizes the gate control signals with a three phase voltage supply. Autonomous operation is obtained making use of the output DC bus to feed the control circuitry, the active diodes and the driver circuitry. The three-phase boost-rectifier is supplied by a three-phase permanent magnet electric generator powered by a solar concentrator dish with variable voltage and variable frequency conditions. Experimental results report an efficiency of up to 94.6% for 25 W and an input of 3.6 V peak per phase with 450.

• Transactions of The Korea Fluid Power Systems Society
• /
• v.3 no.4
• /
• pp.21-28
• /
• 2006

The proportional control solenoid valves as well as the PWM solenoid valves operated by electric signal play an important role in the hydraulic system for automatic transmissions to improve the shift quality. However it is not generally available for the performance data because most of the automotive parts manufacturer don't release the specific test results, especially dynamic performance that is essential to design a shift control algorithm. In this research, a performance test equipment that can be applied to various types of pressure control solenoid valve was developed. It was implemented by 8-bit micro-controller with many useful functions such as adjustable PWM carrier frequency, embedded function generator, current controller, data monitoring and acquisitions, etc. for the test of dynamic performance of solenoid valve as well as the steady-state pressure characteristics. The performance test results for the direct type proportional control solenoid valve show not only the validity of overall functions but also its usefulness as a hydraulic valve tester.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.24 no.3
• /
• pp.317-327
• /
• 2021

Low Frequency Active Sonobuoy(hereinafter referred to as LFAS) are being developed in Korea in consideration of compatibility with existing overseas sonobuoys, and a communication device for acoustic signals receiving and operating control of LFAS has been developed. The communication device needs to verify compatibility with the existing Sonobuoy, and for this purpose, the standardized Sonobuoy communication protocol was applied. The communication device is designed/manufactured to transmit the acoustic signal received in real time from the Sonobuoy through VHF band RF communication to the data processing device, and transmit CFS/CSG commands for operation control to the Sonobuoy through UHF band RF communication. In order to verify the manufactured communication device, the communication status and performance were verified by interlocking test through Ultra Electronics' PASS-II equipment and domestically developed electronic device of Sonobuoy. In addition, operability was verified through environmental tests, water tanks, and marine operations. In the future, the communication device of sonobuoy can be used for verification of the Sonobuoy developed in Korea.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.35 no.1
• /
• pp.98-101
• /
• 2022

Liquid-based Triboelectric nanogenerator (L-TENG) is one of the alternatives to solid-based Triboelectric nanogenerator (S-TENG) because of the absence of surface damage which can decrease the durability of the generator. However, the L-TENG also has an obvious drawback of significantly lower output than that of S-TENG. This article produces water-sloshing-based electricity generating device (W-ED) with a new design of L-TENG that improves electrical output in portable form. The dual-electrode system, consisting of closed-loop circuit and inner electrode which enables water to contact directly in the bottle, can generate the open-circuit voltage and the short-circuit current of up to 348 V and 5.1 mA, respectively. By investigating the motion of water for each frequency, we propose that W-ED is suitable device for a variety of human motions. We expect that W-ED can be applied in small electrical devices or sensors in daily-use items.

• Journal of the Korean Society of Safety
• /
• v.38 no.1
• /
• pp.18-24
• /
• 2023

Severe natural disasters and man-made attacks such as terrorism are causing unprecedented disruptions in power systems. Due to rapid climate change and the aging of energy infrastructure, both the frequency of failure and the level of damage are expected to increase. Resilience is a concept proposed to respond to extreme disaster events that have a low probability of occurrence but cause enormous damage and is defined as the ability of a system to recover to its original function after a disaster. Resilience is a comprehensive indicator that can include system performance before and after a disaster and focuses on preparing for all possible disaster scenarios and having quick and efficient recovery actions after an incident. Various studies have been conducted to evaluate resilience, but studies on economic damage considering the duration of a power outage are scarce. In this study, we propose an optimal algorithm that can identify failures after an extreme disaster and restore the load on the distribution system through emergency distributed power generation input and system reconfiguration. After that, the cost of power outage damage is analyzed by applying VoLL and CDF according to each restoration strategy.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.368-368
• /
• 2021

기후 변화로 인한 극한사상의 크기와 빈도 변화를 예측하는 것은 수공 인프라 설계에 있어 주된 관심사 중 하나이다. 보통 극한사상에 대한 강도, 빈도, 지속시간에 대한 정보가 필요하며, 이는 일반적으로 IDF(Intensity-Duration-Frequency) 곡선으로부터 추출된다. 최근 CMIP(Coupled Model Intercomparison Project) 6단계에서 새로운 이산화탄소 배출 시나리오와 업데이트된 기후모델을 이용하여 미래의 기후에 대한 예측 시계열을 발표했으므로, 미래 기후 변화 시나리오를 기반으로 IDF 곡선을 새로 추정하고 미래 기간의 변화를 평가할 필요가 있다. 본 연구에서는 한국의 40개 지역에 대해 일단위 자료를 시단위로 축소(downscaling)한 후, 확률론적 일기생성기(stochastic weather generator)를 이용하여 30년 시단위 시계열을 100개의 앙상블로 생성하였다. 생성된 시계열로부터 연최대강수량 시계열을 재구성하여 GEV 분포와 gumbel 분포에 적용하였다. 적합도 검정(Anderson-Darling(AD) 검정 및 Kolmogorov-Smirnov(KS) 검정)을 수행하였으며, 과거 자료를 기반으로 생성된 IDF 곡선과 비교 검증하였다. CMIP5의 기후변화 자료를 사용한 결과와 CMIP6 기후변화의 결과를 비교하였으며, 본 연구의 주요 결과는 다음과 같다. (1) 향후 강우 강도는 증가할 것이며 강우 강도의 증가는 말기에 현저하게 관찰될 것이다. (2) 시간별 강우 강도의 미래 변화가 일단위 강우 강도보다 더 크다. (3) 강우 강도의 불확실성을 정량화하기 위해 앙상블을 사용해야 한다. (4) 강우 강도의 미래 변화에 대한 공간적인 경향이 확인된다. 시단위 시계열 앙상블을 생성하여 추정된 IDF 곡선에 대한 정보는 기후 변화의 영향을 평가하고 적절한 적응 및 대응 전략을 개발하는 데 도움이 될 것이다.