• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.2
• /
• pp.119-125
• /
• 2022

In this paper, we present design, implementation and test results of CTM (Chirp Transceiver Module) EM (Engineering Model) for C-Band SAR (Synthetic Aperture Radar) Payload. The CTM is designed to operate dual frequency scan method that simultaneously operate two frequencies in each 50MHz bandwidth to achieve 120Km swath with 10m resolution at about 500Km altitude. The CTM used radiation tolerant RTG4 FPGA for space environment, and implemented with the Parallel DDS (PDDS) method which uses a small memory capacity compared to the memory-map method. Test results show high purity chirp signal generation and excellent IRF performance from received chirp signal after direct digital conversion.

• Journal of People, Plants, and Environment
• /
• v.24 no.2
• /
• pp.229-244
• /
• 2021

Background and objective: The purpose of this study was to comprehensively analyze the user behavior in order to cope appropriately with the increasing demand for mountain usage of those in their 20s and 30s and to allocate resources efficiently. Methods: To analyze the behavior of mountain hiking users, an exploratory data analysis (EDA) was conducted on the data which had been collected in the app Tranggle. The main target are users in their 20s and 30s who visited the mountains in the metropolitan area in 2019-2020. Among them, we have selected data on the top 13 mountains based on the frequency of visits. After data pre-processing, mountain usage patterns were analyzed through statistical analysis and visualization. Results: Compared to 2019, the number of users in 2020 increased 1.36 times. The utilization rate of the well-established hiking trails has also increased. The usage of mountain on weekends (Saturday > Sunday) was still the highest, and the difference in the usage between the days of the week decreased. Outside of work hours, early morning usage has increased and night-time usage has decreased. There was no significant change in usages depending on activity type, level (experience point) and exercise properties. Conclusion: Since the COVID-19 outbreak, the usage of mountains has been changing towards low user density and short-distance trip. in the post-COVID-19 era, the function and role of forests in daily life are expected to increase. To cope with this, further research needs to be carried out with consideration of the wider demographic and social characteristics.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.11
• /
• pp.783-789
• /
• 2022

In a recent study, it was observed that the combustion gas entering the post chamber of a hybrid rocket contains vortices with very small size and high frequency characteristics. In addition, it was observed that small vortices collided with the nozzle wall to create a counter-flow, resulting in additional combustion with ignition delay. This study investigated the physical relationship between ignition delay induced by the counter-flow and the formation of beating pressure. To do this, a newly modified model was proposed by including ignition delay in the existing energy kicked oscillator model proposed by Culick. Numerical results show that the ignition delay is an important factor in determining the occurrence of the combustion pressure beats through the periodic formation of thermoacoustic coupling. In addition, when the ignition delay was reduced by increasing the post chamber length, the phase difference between the energy kick and the pressure generation was increased, the periodic pressure beats did not occur at all.

• Korean Journal of Childcare and Education
• /
• v.19 no.1
• /
• pp.111-126
• /
• 2023

Objective: The purpose of the current research is to collect basic data to diagnose the current status and to foresee the future research trends of young children's parent education programs published in South Korea from 2001 to 2020. Methods: Data collection was made out of RISS of Korea. Excel 2016 was used to categorize 210 finally filtered and collected data which included academic journal articles, MA/PhD dissertations, and funded research reports according to analysis criteria by publication year/5-year-term, research theme, research method, and researchers' academic area. Results: Annual/5-year-term analysis shows increasing trends of parent education programs for young children. Quantitative research was the most frequently implemented method, followed by literature reviews, qualitative research, and mixed research method in order. In research theme, parent-competency reinforcement program was the most frequently implemented theme followed by parent education, socio-emotional issue, special education for young children with special needs, family support, early childhood sex education, and program analysis in order. Education area showed the most active participation in parent education program for young children in comparing with other academic areas in research field. Conclusion/Implications: Research trends of young children's parent education programs showed steady increase in their amount, frequency, and diversity as well. Minority parents need more attentions for providing the next young generation's educational equality. Parent programs during COVID-19 need to gain more research attentions as well as care-giving grandparents, social workers, and public health care helpers in child caring service areas in order to alleviate low-birth rate.

• Human Ecology Research
• /
• v.60 no.4
• /
• pp.625-643
• /
• 2022

The purpose of this study was to explore the trends and core keywords of the secondary school home economics teacher selection test using content analysis and text network analysis. The sample comprised texts of the secondary school home economics teacher 1st selection test for the 2017-2022 school years. Determination of frequency of occurrence, generation of word clouds, centrality analysis, and topic modeling were performed using NetMiner 4.4. The key results were as follows. First, content analysis revealed that the number of questions and scores for each subject (field) has remained constant since 2020, unlike before 2020. In terms of subjects, most questions focused on 'theory of home economics education', and among the evaluation content elements, the highest percentage of questions asked was for 'home economics teaching·learning methods and practice'. Second, the network of the secondary school home economics teacher selection test covering the 2017-2022 school years has an extremely weak density. For the 2017-2019 school years, 'learning', 'evaluation', 'instruction', and 'method' appeared as important keywords, and 7 topics were extracted. For the 2020-2022 school years, 'evaluation', 'class', 'learning', 'cycle', and 'model' were influential keywords, and five topics were extracted. This study is meaningful in that it attempted a new research method combining content analysis and text network analysis and prepared basic data for the revision of the evaluation area and evaluation content elements of the secondary school home economics teacher selection test.

• International Journal of Computer Science & Network Security
• /
• v.23 no.9
• /
• pp.8-16
• /
• 2023

In Japan, high-speed ground transportation service using linear motors at speeds of 500 km/h is scheduled to begin in 2027. To accommodate 5G services in trains, a subcarrier spacing frequency of 30 kHz will be used instead of the typical 15 kHz subcarrier spacing to mitigate Doppler effects in such high-speed transport. Furthermore, to increase the cell size of the 5G mobile system, multiple base station antennas will transmit identical downlink (DL) signals to form an expanded cell size along the train rails. In this situation, the forward and backward antenna signals are Doppler-shifted in opposite directions, respectively, so the receiver in the train may suffer from estimating the exact Channel Transfer Function (CTF) for demodulation. In a previously published paper, we proposed a channel estimator based on Delay and Doppler Profiler (DDP) in a 5G SISO (Single Input Single Output) environment and successfully implemented it in a signal processing simulation system. In this paper, we extend it to 2×2 MIMO (Multiple Input Multiple Output) with spatial multiplexing environment and confirm that the delay and DDP based channel estimator is also effective in 2×2 MIMO environment. Its simulation performance is compared with that of a conventional time-domain linear interpolation estimator. The simulation results show that in a 2×2 MIMO environment, the conventional channel estimator can barely achieve QPSK modulation at speeds below 100 km/h and has poor CNR performance versus SISO. The performance degradation of CNR against DDP SISO is only 6dB to 7dB. And even under severe channel conditions such as 500km/h and 8-path inverse Doppler shift environment, the error rate can be reduced by combining the error with LDPC to reduce the error rate and improve the performance in 2×2 MIMO. QPSK modulation scheme in 2×2 MIMO can be used under severe channel conditions such as 500 km/h and 8-path inverse Doppler shift environment.

• Nuclear Engineering and Technology
• /
• v.55 no.9
• /
• pp.3260-3267
• /
• 2023

Zr-Nb alloy have been widely used as fuel rods in nuclear power plants. However, from the Fukushima nuclear accident, the weakness of the rod was revealed under harsh conditions, and research on the safety of these types of rods was conducted after the disaster. The method of depositing chromium onto the existing Zr-Nb alloy fuel rods is being considered as a means by which to compensate for the weakness of Zr-Nb alloy rods because chromium is strong against oxidation at high temperatures and has high strength. In order to secure these advantages, it is important to maintain the Cr thickness of the rods and properly inspect the rods before and during their use in power generation. Eddy current testing is a typical means of evaluating the thickness of thin metals and detecting surface defects. Depending on the size and shape of the inspected object, various eddy current sensors can be applied. In particular, because pancake sensors can be manufactured in very small sizes, they can be used for inspections even in narrow spaces, such as a nuclear fuel assembly. In this study, an eddy current technique was developed to confirm the feasibility of Cr coating thickness evaluations. After determining the design parameters of the pancake sensor by means of a FEM simulation, a FPCB pancake sensor was manufactured and the optimal frequency was selected by measuring minute changes in the Cr-coating thickness using the developed sensor.

• Journal of Hydrogen and New Energy
• /
• v.34 no.2
• /
• pp.155-161
• /
• 2023

Recently, a study on alternative and renewable energy is being conducted due to energy depletion and environmental problems. In particular, a hydrogen has the advantage of converting and storing the remaining energy into water-electrolyzed hydrogen through renewable energy generation. In general, due to reasons such as insulation problems, a study on high-pressure hydrogen storage tanks and related parts has recently been conducted. However, in the case of liquid hydrogen, the volume can be reduced by about 800 times or more compared to high-pressure hydrogen gas, so the study on this is needed as a technology that can increase energy density. In this study, the evaporation characteristics were analyzed under fixed heat flux conditions for liquid hydrogen storage tanks and the change in thermal stratification according to sloshing was analyzed. The heat flux condition was fixed at 250 W/m² and the horizontal resonance frequency of the primary mode was applied to the storage tank. As a result, it was confirmed that the thermal stratification phenomenon decreased compared to the case where the slashing was not present due to forced convection when the slashing was present.

• Computers and Concrete
• /
• v.31 no.5
• /
• pp.457-468
• /
• 2023

Buildings, bridges, and dams are examples of civil infrastructure that play an important role in public life. These structures are prone to structural variations over time as a result of external forces that might disrupt the operation of the structures, cause structural integrity issues, and raise safety concerns for the occupants. Therefore, monitoring the state of a structure, also known as structural health monitoring (SHM), is essential. Owing to the emergence of the fourth industrial revolution, next-generation sensors, such as wireless sensors, UAVs, and video cameras, have recently been utilized to improve the quality and efficiency of building forensics. This study presents a method that uses a target-based system to estimate the dynamic displacement and its corresponding dynamic properties of structures using UAV-based video. A laboratory experiment was performed to verify the tracking technique using a shaking table to excite an SDOF specimen and comparing the results between a laser distance sensor, accelerometer, and fixed camera. Then a field test was conducted to validate the proposed framework. One target marker is placed on the specimen, and another marker is attached to the ground, which serves as a stationary reference to account for the undesired UAV movement. The results from the UAV and stationary camera displayed a root mean square (RMS) error of 2.02% for the displacement, and after post-processing the displacement data using an OMA method, the identified natural frequency and damping ratio showed significant accuracy and similarities. The findings illustrate the capabilities and reliabilities of the methodology using UAV to evaluate the dynamic properties of structures.

• International Journal of Computer Science & Network Security
• /
• v.23 no.6
• /
• pp.27-34
• /
• 2023

This paper proposed an Inter-Carrier-Interference (ICI) Canceling Orthogonal Frequency Division Multiplexing (OFDM) receiver for 5G mobile system to support 500 km/h linear motor high speed terrestrial transportation service. A receiver in such high-speed train sees the transmission channel which is composed of multiple Doppler-shifted propagation paths. Then, a loss of sub-carrier orthogonality due to Doppler-spread channels causes ICI. The ICI Canceler is realized by the following three steps. First, using the Demodulation Reference Symbol (DMRS) pilot signals, it analyzes three parameters such as attenuation, relative delay, and Doppler-shift of each multi-path component. Secondly, based on the sets of three parameters, Channel Transfer Function (CTF) of sender sub-carrier number 𝒏 to receiver sub-carrier number 𝒍 is generated. In case of 𝒏≠𝒍, the CTF corresponds to ICI factor. Thirdly, since ICI factor is obtained, by applying ICI reverse operation by Multi-Tap Equalizer, ICI canceling can be realized. ICI canceling performance has been simulated assuming severe channel condition such as 500 km/h, 2 path reverse Doppler Shift for QPSK, 16QAM, 64QAM and 256QAM modulations. In particular, for modulation schemes below 16QAM, we confirmed that the difference between BER in a 2 path reverse Doppler shift environment and stationary environment at a moving speed of 500 km/h was very small when the number of taps in the multi-tap equalizer was set to 31 taps or more. We also confirmed that the BER performance in high-speed mobile communications for multi-level modulation schemes above 64QAM is dramatically improved by the use of a multi-tap equalizer.