• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2006년도 전력전자학술대회 논문집
• /
• pp.53-55
• /
• 2006

In this paper discusses winding methode of single phase AC-DC reversible power converter The reversible power converter driven by multi Tap winding at both side switching control. It has a advantage that simple drive of main switching device. and obtain load current of good quality without filter circuit and free from noise or isolation for lower switching frequency. In this research, study on current type converter and inverter circuit that consist for possibility of AC-DC/DC-AC multi-level reversible converter.

• 전력전자학회논문지
• /
• 제17권2호
• /
• pp.142-149
• /
• 2012

The independently regulated dual-output LLC resonant converter using only one power stage and one control IC is proposed in this paper. The conventional dual-output LLC resonant converter requires the extra non-isolated DC/DC converter to obtain the tightly regulated slave output voltage, which results in the low power conversion efficiency and high production costs. On the other hand, since the proposed converter controls the master and slave output voltages by pulse width modulation(PWM) and pulse frequency modulation(PFM), it can achieve tightly regulated dual output voltages without the additional non-isolated DC/DC converter. Therefore, it features a high efficiency and low cost. To confirm the validity of the proposed converter, theoretical analysis and experimental results from a 40W LED driver prototype are presented.

• Journal of Power Electronics
• /
• 제9권1호
• /
• pp.26-35
• /
• 2009

A high efficiency active clamp sepic-flyback converter is presented for fuel cell generation systems. The proposed converter is a superposition of a sepic converter mode and. flyback converter mode. The output voltages of the sepic converter mode and flyback converter mode can be regulated by the same PWM technique with constant frequency. By merging the sepic and flyback topologies, they can share the transformer, power MOSFET and active clamp circuit. The result has outstanding advantages over conventional active clamp DC-DC converters: high efficiency, high power density, and component utilization. Simulation results and experimental results are presented to verify the principles of operation for the proposed converter.

• 전력전자학회논문지
• /
• 제11권4호
• /
• pp.385-394
• /
• 2006

일반적인 푸시풀 컨버터는 스위치 소자의 전압 스트레스로 인하여 그 사용범위가 제한적이다. 그러나 푸시풀 컨버터는 연료전지와 같이 가변의 저전압에서 고전압 출력을 요하는 전력변환기에 적합한 구조이다. 본 논문에서는 연료전지 시스템에 ZVS-ZCS가 가능한 새로운 전력변환기 구조를 제안한다. 제안된 푸시폴 컨버터의 스위치 소자는 새로운 수동 클램프 회로에 의해 ZVS 또는 ZCS가 이루어진다. 또한 이러한 수동 클램프 회로로 푸시풀 컨버터의 순시과전압 문제가 해결되었다. 또한 두 배의 주파수를 갖는 벅 컨버터의 스위칭 신호가 푸시풀 컨버터의 스위칭 신호에 동기 시킴으로서 전류 형 인덕터와 변압기 권선의 피크 전류가 저감된다. 제안하는 계통 연계형 연료 전지 시스템에 대한 동작을 이론적으로 분석하고 시뮬레이션 및 DSP TMS320F2812 을 이용한 1 [kW]급 시작품의 실험 결과로부터 제안하는 인버터의 타당성을 검증하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 A
• /
• pp.518-520
• /
• 1996

High frequency switching converters are becoming more popular because of several benefits which are essential in power conversion system. This paper introduces a high speed digital controller using TMS320C40 DSP chip which can be used for high frequency switching converters and demonstrates its performance by operating three-phase PWM AC/DC converter with unity power factor at 20kHz sampling frequency. TMS320C40 DSP chip operates with 40-ns instruction cycle times and is capable of 275 MOPS. The running time of real time control loop at the three-phase PWM AC/DC converter is $44.6{\mu}sec$.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
• /
• pp.266-270
• /
• 2001

This paper presents a novel topological prototype of voltage source series quasi-resonant zero current soft-switching pulse frequency modulated dc-dc power converter circuit using IGBTs which incorporates a high-frequency flyback transformer link. Its steady-state operating principle is described on the basis of simulation analysis, along with the open loop controlled power regulation characteristics of the multi-functional coupled inductors linked dc-dc power converter operating under a principle of zero current soft switching commutation.

• Journal of information and communication convergence engineering
• /
• 제6권4호
• /
• pp.417-420
• /
• 2008

Solar electric systems have very little impact on environment, making them one of the cleanest power-generating technologies available. While they are operating, PV systems produce no air pollution, hazardous waste, or noise, and they require no transportable fuels. In PV system design, the selection and proper installation of appropriately-sized components directly affect system reliability, lifetime, and initial cost. In this research, we have studied the PWM(Pulse Width Modulation) signals. I proposed an efficient photovoltaic power interface circuit incorporated with a DC-DC converter and a sine-pwm control method full-bridge inverter. In grid-connected solar power systems, the DC-DC converter operates at high switching frequency to make the output current a sine wave, whereas the full-bridge inverter operates at low switching frequency which is determined by the ac frequency. Thus, it can reduce the switching losses incurred by the full-bridge inverter. Full-bridge converter is controlled by using microprocessor control method, and its operation is verified through computer aided simulations.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1992년도 하계학술대회 논문집 B
• /
• pp.1009-1011
• /
• 1992

This paper discribes a study on the bridge type power converter for laser high power generator with high frequency and high voltage using MOS-GTO. This converter effectively makes the best of the high frequency HV transformer and input-side equivalent parasitic capacitance of high voltage feeding cable in place of DC output smoothing filter. The cicuit configuration and performance are discussed and design criteria are given. The prototype rated of 10 KW, 100 KHz is implemented and experimental results are given.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 B
• /
• pp.1129-1131
• /
• 2001

A new low cost single stage high power factor electronic ballast for fluorescent lamps is presented in this paper. The proposed topology is based on integration of two-boost converter and LC type high frequency resonant converter. A ballast is obtained by simple construction, because full bridge rectifier diode is eliminated and simple control circuits is applied. Using two boost converter operating positive and negative half cycle respectively at line frequency (60Hz), operating in discontinuous conduction mode performs high power factor. The simulated and experimental results for 64W fluorescent lamps operating at 45kHz switching frequency and 110V line voltage have been obtained.

• 전력전자학회논문지
• /
• 제8권1호
• /
• pp.64-69
• /
• 2003

전류모드 제어시 전류루프에는 표본화 효과에 의해 저주파 모델로는 예측하기 어려운 고주파 성분이 존재한다. 본 논문에서는 영전압 스위칭 하프 브리지 컨버터의 정상상태에서의 출력전압 관계식을 구한다 또 이를 바탕으로 전류모드로 제어할 때 전류루프에 존재하는 표본화 효과를 고려하여 저주파 소신호 모델이 예측하기 어려운 고주파 성분의 특성을 표본화 이득을 통하여 더욱 정확히 예측할 수 있는 방법을 제시한다.