• Speech Sciences
• /
• 제9권2호
• /
• pp.179-192
• /
• 2002

Our present study was performed to investigate acoustically the Korean normal adults' voices, with enough large number of subjects to be reliable. 120 Korean normal adults (60 males and 60 females) of the age of 20 to 39 years produced sustained three vowels, /a/, /i/, and /u/ and read a part of 'Taking a Walk' paragraph, and by analyzing them acoustically with MDVP of CSL, we could get the fundamental frequency ($F_{0}$), jitter, shimmer and NHR of sustained vowels: speaking fundamental frequency ($SF_{0}$), highest speaking frequency (SFhi), lowest speaking frequency (SFlo) of continuous speech. As results, on the average, male voices showed 118.1$\sim$122.6 Hz in $F_{0}$, 0.467$\sim$0.659% in jitter, 1.538$\sim$2.674% in shimmer, 0.117$\sim$0.114 in NHR, 120.8 Hz in $SF_{0}$, 183.2 Hz in SFhi, 82.6 Hz in SFlo. And, female voices showed 211.6∼220.3 Hz in F0, 0.678∼0.935% in jitter, 1.478∼2.582% in shimmer, 0.098∼0.114 in NHR, 217.1 Hz in $SF_{0}$, 340.9 Hz in SFhi, 136.0 Hz in SFlo. Among the 7 parameters, every parameters except shimmer showed the significant difference between male and female voices. And, when we compared the three vowels, they showed significant differences one another in shimmer and NHR of both genders, but not in $F_{0}$ of males and jitter of females.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• 제40권3호
• /
• pp.189-195
• /
• 2004

The underwater sound of California gary whale was analyzed to discuss obtained results from the previous data to compare the underwater sound between Korean gray whale and California gray whale. The frequency of low frequency rumble which occupy about 50% of the underwater sound changed to max. 654Hz and the average of its lasted time was 570msec. The range of frequency variation was coincided as compared with the previous data. The range of frequency variation for the bubble type sounds and knocks was 24${\sim}$1029Hz, respectively. The average of lasted time was 1100msec and 1364msec, respectively. The range of frequency variation and lasted time of bubble type sounds was higher than the previous result while the sound of knocks was coincided. The range of frequency variation for the sound of bong, pluses and chirps was 34${\sim}$213Hz, 75${\sim}$360Hz and 120${\sim}$200Hz, respectively and the average of lasted time was 84msec, 873msec and 80msec, respectively.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• 제22권7호
• /
• pp.676-684
• /
• 2012

Numerical analysis was performed to investigate the heavy-weight impact noise of apartment houses. The FEM is practical method for prediction of low-frequency indoor noise. The results of numerical analysis, the shape of the acoustic modes in room-2 are similar to that of acoustic pressure field at the fundamental frequency of acoustic modes. And the acoustic pressure was amplified at the natural frequency of the acoustic modes and structural modes. The numerical analysis result of sound pressure level at 63 Hz and 125 Hz octave-band center frequency are similar to the test results, but at 250 Hz and 500 Hz have some errors. Considering most of bang-machine force spectrum exists below 100 Hz, the noise at 250 Hz and 500 Hz are not important for heavy-weight impact noise. Thus, the FEM numerical analysis method for heavy-weight impact noise can apply to estimate heavy-weight impact noise for various building systems.

• Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
• /
• 제7권1호
• /
• pp.20-26
• /
• 1996

The purposes of this study were to analyze the sound of bird's frequency region and pattern and to discuss hearing impaired children's auditory discrimination. The results were ie follows; 1) The sounds of bird's frequency region were divided into Low(below 1, 000Hz), Mid(between 1, 000 and 4, 000Hz) and High(between 2, 000 and 4, 000Hz). 2) The sounds of bird, which were same, long, high pattern, were in Mid ＆ High. Short and high pattern were above High.

• Journal of the Institute of Electronics and Information Engineers
• /
• 제49권10호
• /
• pp.233-239
• /
• 2012

The harmonic frequency occurred in a power system causes errors and failures of equipments such as motors, and an unnecessary power consumption. The fundamental countermeasure for the harmonic frequency is to eliminate the cause of the harmonic frequency. This paper describes about making the device to figure out the cause in real time, verifying the operation of the device, and utilizing it to various power quality measurements. The power usually has the line frequency between 45Hz and 66Hz. In this research, the number of the harmonic frequencies which can be analysed inside the 2.8kHz bandwidth, the filter bandwidth of ADE7880, is 2800/f, and the maximum is 2800/45 = 63. The maximum order of the harmonic frequency in Korea, which has the line frequency of 60Hz, was measured as 2800/60 = 46th. Also, the accuracy of the voltage, current, and power measurement had the error within 0.1%, confirming that it is very precise.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 한국해양정보통신학회 2006년도 춘계종합학술대회
• /
• pp.607-610
• /
• 2006

The Digital Frequency Synthesizer(DFS) that generates the wideband signal with hish speed frequency hopping rate and high frequency resolution characteristics was implemented in this paper. The DFS was applied as local oscillator for direct frequency conversion IF modules of DVB-RCS, which directly generates the transmission immediate frequency signal by using DDS and wideband PLL technologies. The DDS technology provides high speed frequency hopping rate and high frequency resolution characteristics, which ate also the DVB-RCS requirement. The wideband PLL technology also provides the wideband signal generation, which is a necessity for direct frequency conversion modules. The implemented DFS provide the spurious suppression characteristic of -50 dBc, frequency resolution of 0.233 Hz and frequency hopping rate of 125 ns, respectively. Also the DFS represent the amplitude flatness of 3 dB and less in the pass-band and phase noise characteristic of -75 dBc/Hz at 1 kHz frequency offset.

• Journal of the Korean Institute of Telematics and Electronics
• /
• 제22권1호
• /
• pp.46-52
• /
• 1985

The modulo PLL was applied to the implementation of frequency synthesis with the narrow channel spacing, many channels and three different frequency bands. So , VCO (voltage controlled oscillator) designed In this paper is suitable for the device with three different frequency bands 10Hz, 40Hz, 400Hz channel spacing, and 512 channels.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• 제62권9호
• /
• pp.1329-1334
• /
• 2013

A electric railway is unique system that electric trains consumed huge electric power are travelled and is much interested with EMC. There were several problems exceeding the standard in the frequency range of 9kHz to 150kHz because the radiation noises were moved the higher frequency range according to developing the power electronic technology. It is studied the experimental confirmation of main noise source on the electric train and the analytic simulation for reducing the noise level in this paper.

• Proceedings of the KIEE Conference
• /
• 대한전기학회 1989년도 하계종합학술대회 논문집
• /
• pp.367-369
• /
• 1989

An infrasonic wide band transducer fabricated by polyvinylidenefluoride[PVDF] is studied experimentally. The sensitivity of transducer is fixed -53[dB] at frequency range from $10^{-2}$[Hz] to 2[Hz] and fixed -42[dB] range from 10[Hz] to 400[Hz] respectively. The resonance frequency of the element is 14[Hz], which is accord with the mechanical resonance frequency 25.5 [Hz]. We conjecture that the element is applicable to acoustics, communication system,seismological observation and other similiar fields.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• 제63권1호
• /
• pp.179-183
• /
• 2014

An electric railway is unique system that electric trains consumed huge electric power are travelled and is much interested with EMC. There were several problems exceeding the standard in the frequency range of 9 kHz to 150 kHz because the radiation noises were moved the higher frequency range according to developing the power electronic technology. It is studied the analytic simulation for reducing noise level in terms of cables of the electric train and is experimentally approved the reduction effectiveness.