• Culinary science and hospitality research
• /
• v.7 no.1
• /
• pp.91-105
• /
• 2001

Chou-cream bread and Red bean paste bread were made by sponge & dough method with the sweet dough formula. The bread quality was studied by the measurements of the temperature variation, the fermentation level of frozen dough in the special condition(dough conditioner of 5$^{\circ}C$, 10$^{\circ}C$, 15$^{\circ}C$, 20$^{\circ}C$ and 30$^{\circ}C$), the product volume and thesensory evaluation with frozen dough thawed, fermented and baked. When thawing temperature was low, the core temperature of frozen dough increased slowly and the time for thawing and fermentationwas long. In thawing and fermentation, the core temperature of Red bean paste dough increased faster than that of Chou-cream dough. When the thawing conditions of dough conditioner(retarder) were 20$^{\circ}C$ and 30$^{\circ}C$, the level of total time decrease for thawing and fermentation was 55 and 86 min in Chou-cream dough and 62 and 90 min in Red bean paste dough respectively in comparison to dough conditioner of 5$^{\circ}C$. In volume of baked products, they showed no significant difference for three weeks of storage, but slight difference for four weeks of storage. The result was that Chou-cream bread was larger than Red bean paste bread in the decrease of volume. In sensory evaluation, the bread quality became low according to the time. When stored for four weeks in the freezer, significant differences were found in Chou-cream vread, but slight difference appeared in Red bean paste bread. The research identified that Red bean paste dough was more effective in manufacturing time than that of Chou-cream dough, when thawing temperature was high, and if frozen dough was thawed in the retarder of lower than 20$^{\circ}C$, the bread quality in terms of volume and sensory evaluation had no significant difference in comparison to the none-freezing Red bean paste bread.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1991.10a
• /
• pp.5-10
• /
• 1991

This study was performed to find out the effect about the spacing factor and durability factor to evaluate the durability of concrete in high-strength concrete with freezing and thawing as following each condition, 1) unit cement content : 500kg/$\textrm{m}^3$, 550kg/$\textrm{m}^3$ 2) water/cement ratio : 25%, 30%, 35% 3) air content : below 1.5%, 1.6~3.5%, 4~6%, over 7% From the results tested, a variation of air content was more effective to the durability of concrete than that of water/cement ratio and unit cement content.

• Journal of Embryo Transfer
• /
• v.6 no.1
• /
• pp.13-24
• /
• 1991

The objective of this experiment was to study some possibilities to simplify freezing, thawing and transfer procedure of one-step straw method comparing with the conventional methods using bovine embryos. The previous work are also designed to investigate the thawing effect by development stage and its quality using the embryos. Results obtained were summarized as follows: 1. A total of 87 embryos from 14 donor cows were frozen-thawed and an average of frozen embryo/donor was 6.2. 2. The survival rates of morula stage(65.4%) were higher than those of blastocyst stage(57.l%) and vice versa in rate of morphological recovery (80% vs 95.4%). However. no significant difference was denoted between them. 3. In difference between the groups of good quality and poor quality. good quality was resulted in a significantly higher embryo survival rate(75%) and recovery rates(95%) than poor quality(P<0.0l). 4. In effects of non-permeable sugar dilution in added to l.0M glycerol. higher survival rates were orderd in sucrose. lactose, raffinose and xylose. But lactose-raffinose, sucrose-trehalose and xylose in added to 2.OM glycerol. 5. The highest survival rates were obtained by direct plunge into the liquid nitrogen with 3.OM concentration both of glycerol and trehalose. 6. The survival rates in vitro condition of one-step and direct plunge methods(75%-87.5%) were significantly higher than those of multiple steps (21.4-52.6%) in in vitro (P<0.0l). However, the results of single-step were critical in comparing to other steps of final pregnant conformation.

• Journal of Embryo Transfer
• /
• v.27 no.1
• /
• pp.45-50
• /
• 2012

The objective of this study is to estimate the effect of adding TES to LEY and FGE freezing extender for the sperm viability, acrosomal morphology and DNA fragmentation from miniature pig sperm, we evaluated sperm characteristics in TFGE, TLE and LEY with various thawing condition ($37^{\circ}C$ for 20 sec, 45 sec and $75^{\circ}C$ for 5 sec, respectively), and in different concentration of glycerol at 1%, 1.5%, 3%. The sperm viability and normal acrosome intact(NAI) in TFGE (Viability : $60.3{\pm}2.4$, NAI : $58.6{\pm}2.2%$), TLE ($61.3{\pm}2.4$, $62.2{\pm}2.2%$) extender significantly(p<0.05) increased than that in LEY ($50.2{\pm}2.4$, $54.5{\pm}2.2%$) extender thawed at $75^{\circ}C$ for 5 sec. According to the results from glycerol concentration, the viability and NAI of miniature pig sperm in 1.5% glycerol TLE ($66.1{\pm}3.2$, $66.2{\pm}1.0%$) was highest among the experimental groups. In accordance with this, DNA fragmentation rates was the lowest in TLE ($43.3{\pm}0.5%$) while that in LEY ($63.5{\pm}2.3%$) is the highest. Therefore, these results suggest that TLE extender method for freezing- thawing of miniature pig sperm increased the viability after thawing.

• Journal of the Korean Geotechnical Society
• /
• v.39 no.5
• /
• pp.51-63
• /
• 2023

Numerical analysis was conducted to determine the effect of soil behavior by thawing and freezing of seasonal frozen soil on pile foundations. The analysis was performed using the finite element method (FEM) to simulate soil-pile interaction based on the atmosphere temperature change. Thermomechanical coupled modeling using FEM was applied with the temperature-dependent nonlinear properties of the frozen soil. The analysis model cases were applied to the MCR and HDP models to simulate the elastoplastic behavior of soil. The numerical analysis results were analyzed and compared with various conditions having different length and width sizes of the pile. The results of the numerical analysis showed t hat t he HDP model was relat ively passive, and t he aspect and magnit ude of t he bearing capacit y and displacement of the pile head were similar depending on the length and width of the pile conditions. The vertical displacement of the pile head by thawing and freezing of the ground showed a large variation in displacement for shorter length conditions. In the MCR model, the vertical displacement appeared in the maximum thaw settlement and frost heaving of 0.0387 and 0.0277 m, respectively. In the HDP model, the vertical displacement appeared in the maximum thaw settlement and frost heaving of 0.0367 and 0.0264 m, respectively. The results of the pile bearing capacity for the two elastoplastic models showed a larger difference in the width condition than the length condition of the pile, with a maximum of about 14.7% for the width L condition, a maximum of about 5.4% for M condition, and a maximum of about 5.3% for S condition. The significance of the effect on the displacement of the pile head and the bearing capacity depended on the pile-soil contact area, and the difference depended on the presence or absence of an active layer in the soil and its thickness.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.25 no.1
• /
• pp.29-33
• /
• 2021

Purpose Plasma renin activity (PRA) test is important for the diagnosis of primary aldosteronism. PRA is an easily deformed substance in vitro and affected by temperature changes. Laboratory of ASAN medical center has consistently found that there was a difference between the initial and re-experimental results. We compared and analyzed the differences in PRA test results according to the sample storage status. Materials and Methods The measurement of PRA was performed by using the radioimmunoassay. From August to September 2020, 43 PRA re-test samples were tested with different sample storage condition. The first group was re-examined by freezing the plasma-separated samples at -18℃, and the second group was re-examined with refrigerated EDTA sample. Also, additional tests were conducted on 13 PRA samples to verify the effect on thawing temperature differences in plasma-separated samples. The same samples were divided into two parts and stored frozen at -18℃, respectively, and thawing samples in room temperature and those in refrigerator were were conducted. Each result was compared and analyzed based on the initial experimental results. Results The results of re-examination after frozen storing plasma separation samples showed a lower correlation than the results of re-examination with EDTA plasma samples in refrigerator. When calculating the percentage based on the initial test results, the average percentage of each was 404.9% and 133.8%. The correlation coefficient was also R=0.8501 and R=0.9966, respectively, showing a higher correlation between plasma in the refrigerated sample EDTA tube. In comparison experiments with differences in thawing temperature, average percentage of the results of initial test and room temperature thawing was 94.3% and the average percentage of the results of refrigerated thawing was 88.0%. After again freezing the sample, the average percentage of the second room temperature thawing result is 107.5%, and the second refrigerated thawing group is 112.7%. Both groups showed an increase from first thawing. Conclusion A comparative analysis of retesting according to differences in sample storage methods in PRA tests showed a higher correlation between the results of retesting of the refrigerated EDTA plasma. And repeated freezing and melting of plasma separation samples, regardless of temperature during defrosting, has been shown to affect results. Therefore, retest of PRA should re-collect plasma from original EDTA plasma to increase reproducibility.

• Asian-Australasian Journal of Animal Sciences
• /
• v.22 no.2
• /
• pp.174-180
• /
• 2009

This study was carried out to establish an appropriate condition for the efficient cryopreservation of the mouse pronuclear embryo. In vitro cryopreservation of pronuclear embryos was carried out by slow freezing or vitrification methods and development rate of 2-cell, blastocyst and hatched blastocyst was measured as well as survival rate of the thawed pronuclear embryo. After slow freezing, vitrification and thawing of mouse pronuclear embryos, the survival rate and blastocyst development rate for the vitrification group was 97.3 and 53.4%, respectively, which was significantly higher as compared to the slow freezing group with 88.6 and 23.9%, respectively (p<0.05). Blastocyst developmental rate in each experimental group was significantly higher for 21 h in the post-hCG group at 40.5-57.0% than the 24 h post-hCG group at 40.5% (p<0.05). ICM (Inner cell mass) cell numbers of blastocyst-stage embryos during the different stages of mouse pronuclear embryos, slow freezing and vitrification period in the control and vitrification groups were 22.1${\pm}$2.7 and 17.0${\pm}$3.1-22.0${\pm}$3.2, respectively; hence, the slow freezing group (10.2${\pm}$2.0) had significantly higher cell numbers than those of the other two groups (p<0.05). Trophoblast (TE) cell number in the control group, 65.8${\pm}$12.6, was significantly higher than in the slow freezing group, 41.6${\pm}$11.1 (p<0.05). The total cell numbers in the control group and 21 h post hCG group were 87.9${\pm}$13.6 and 81.8${\pm}$14.1, respectively, and were significantly higher than for the slow freezing group (51.8${\pm}$12.6; p<0.05).

• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.05a
• /
• pp.184-187
• /
• 2004

There are many factors that generate the early deterioration of the concrete structure. As the one of the representative factors, we can think an invasion of the water, air and so on. The water and air invade in inside void along the capillarity and they become the cause that the durability like corrosion of layer department due to freezing and thawing, inside steel frame corrosion, and so on blacks. Therefore with covering permeability covering waterproofing material of fluid condition in outer wall, intercepting the deterioration factor due to the infiltration of water from outside and for salt damage of concrete layer department, freezing damage and neutralization, it needs to improve durability of structure. This study separately examined physical and chemical specific of quality liguid siliceous of waterproofing material. Therefore as this applys the construction site, it improves the durability of concrete structure. Further this presents the application plan from the construction market against the new material.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2014.11a
• /
• pp.7-8
• /
• 2014

Latex-modified concrete using ready mix concrete (R-LMC) was developed for application of building construction project (specifically, the rooftop of a parking garage unable to use heavy equipments for bridge deck overlay) due to three major outstanding properties of R-LMC; bond strength, resistance of cracks at early age, and resistance of freezing and thawing. However, R-LMC at the placement stage is required to be sufficiently cured because R-LMC is very sensitive to rate of evaporation of surface moisture. This study focused on effects of different curing methods and climate condition on cracks on the surface of hardened R-LMC considering the chart of rate of evaporation of surface moisture from concrete provided by American Concrete Institute in manual for placement of latex modified concrete.

• Journal of Embryo Transfer
• /
• v.26 no.3
• /
• pp.201-207
• /
• 2011

The present study was performed to investigate the survival and subsequent embryonic developmental rate of immature and mature oocytes after vitrification and pronuclear stage embryos after slow-freezing and vitrification. We have also tried to examine the dependency of concentrations (7.5, 15%) and exposure time (5, 10, 20 min) of ED cryoprotectant on developmental rate of pronuclear stage embryos. The developmental rates of 2-ce1l and blastocyst embryos at mature oocytes were significantly (p<0.05) higher than immature oocytes. After slow freezing, vitrification and thawing of pronuclear stage embryo, the survival and developmental rates of blastocysts and hatched blastocysts were significantly (p<0.05) higher after vitrification than after slow-freezing. On contrary, the developmental rates of 2-cell embryos were significantly (p<0.05) higher after slow freezing than after vitrification. The cryopreservation methods of pronuclear stage embryos vitrified by exposed to 7.5% ED solution for 5 minutes was significantly (p<0.05) higher than other experimental group. The results of our study suggest 1hat the developmental rates of mature oocytes have been more successful than immature oocytes during vitrification. Vitrification was more efficient than slow freezing in case of pronuclear stage embryos. The effective cryopreservation method of pronuclear stage embryos was vitrified by exposed to 7.5% ED solution for 5 minutes.