• Food Science and Biotechnology
• /
• v.16 no.4
• /
• pp.659-662
• /
• 2007

In order to determine the optimal storage conditions of Capsosiphon fulvescens (maesaengi), 2 types of wash solutions (distilled water and seawater) and storage temperatures (-20 and $-80^{\circ}C$) were evaluated for the effectiveness of microbial growth inhibition and the changes of texture, color, and proximate composition. Thawed samples that had been washed with seawater and stored at $-20^{\circ}C$ for 50 days showed a 1.1-fold increase in hardness compared to the initial hardness of the sample ($1.9{\times}10^5\;dyne/cm^2$). There was no change in moisture, ash, or crude lipid during storage at -20 and $-80^{\circ}C$ for 60 days, while there was a $1{\pm}0.2%$ decrease in crude protein content for the control during storage at both -20 and $-80^{\circ}C$ for 60 days. In conclusion, the recommended optimal storage conditions for retaining the quality of C. fulvescens are: temperatures at or below $-20^{\circ}C$ and washings with either distilled water or seawater for inhibiting microbial growth, temperatures at or below $-20^{\circ}C$ and a washing with seawater to prevent reductions in hardness, and a temperature of $-80^{\circ}C$ and washings with either distilled water or seawater to protect against color changes.

• Korean Journal of Food Science and Technology
• /
• v.35 no.3
• /
• pp.429-435
• /
• 2003

The purpose of this study is to predict multiplication patterns of foodborne pathogens according to packaging methods and storage conditions in home-delivered meals. Pan fried oak mushroom and meat, soy sauce glazed hair tail and roasted dodok which inoculated $10^6\;CFU/g$ of foodborne pathogens were packaged by wrap packaging, top sealing, vacuum packaging and stored at 25, 4 and $-18^{\circ}C$ during 5 days. The result of study was revealed that the growth and multiplication pattern of the inoculated foodborne pathogens was inhibited in chilling and freezing storage after vacuum packaging, and was significantly influenced by storage temperature. The survival of Listeria monocytogenes was also significantly influenced by storage period. The effective method to preserve the bacteriologic safety of pan fried oak mushroom and meat and soy sauce glazed hair tail in home-delivered meals was stored for maximum three days in chilling storage after vacuum packaging.

• Journal of the Korean GEO-environmental Society
• /
• v.14 no.3
• /
• pp.35-40
• /
• 2013

In most cases, Geotechnical Structures installed in freezing areas require extra countermeasures for reducing freeze damage. However, in terms of domestic tunnels, studies and case reports for geotechnical structures such as tunnels and retaining walls are not fluently carried out, causing lack of research about ways to decrease freeze damage. For these causes, domestic design criteria about structures does not specifically institutionalization for geotechnical structures. This research have done on-site investigation about tunnels, cut slopes and retaining walls. Also, this research includes the process of analyzing the histories of maintenance for class 1 and class 2 structures that happened in the past 40 years, studying characteristics of structure's maintenance and reinforcement in different areas with different climate. As the result, it was analyzed that domestic geotechnical structures showed need for longer maintenance and reinforcement that are located in Gangwon mountain area, Gangwon north region and Gyeonggi north region where the temperature is relatively low. This research can be concluded in need for revision of design criteria for structures located in freeze damage area.

• Journal of ILASS-Korea
• /
• v.8 no.2
• /
• pp.1-6
• /
• 2003

The liquid phase LPG injection (LPLI) system (the third generation technology) has been considered as one of the next generation fuel supply systems for LPG vehicles, since it has a very strong potential to accomplish the higher power, higher efficiency, and lower emission characteristics than the mixer type(the second generation technology) fuel supply system However. when a liquid LPG fuel is injected into the inlet duct of an engine, a large quantity of heat is extracted due to evaporation of fuel. This leads to freezing of the moisture in the air around the outlet of a nozzle, which is called icing phenomenon. It may cause damage to the outlet nozzle of an injector or inlet valve seat. In this work, the experimental investigation of the icing phenomenon was carried out The results showed that the icing phenomenon and process were mainly affected by humidity of inlet air instead of air temperature in the inlet duel. Also, it was observed that the total ice formed around the nozzle weighs at about $150mg{\sim}260mg$ after injection for ten minutes. And some fuel species were found in the ice attached at the front side of a nozzle, while frozen ice attached at the back of a nozzle was mostly' consisted of moisture of inlet air. Therefore, some frozen ice deposit. detached from front nozzle of an injector, may cause a problem of unfavorable air fuel ratio control in the small LPLI engine.

• Journal of Conservation Science
• /
• v.26 no.4
• /
• pp.385-395
• /
• 2010

This study aimed to identify weathering factors and to assess the conservation environment through microclimatic analysis of Hyeonpung Seokbinggo (ice-storing stone warehouse). The stone blocks inside Seokbinggo suffered crack, displacement, break-out, exfoliation, efflorescence, brown and black discoloration, and biological colonization. Biological colonization represented the maximum deterioration rate(24%) among those weathering forms. The indoor microclimate showed parallel patterns with outdoor one, but the indoor temperature and relative humidity ranged far narrower than outdoor and remained steady. The environmental characteristics resulted from blocking-out of outdoor heat by the closed entrance and surrounding microtopography. This prevented water condensation and freezing effects, so that it reduced physical deterioration of rock, and maximized ice-storing effect for long time. However, contrary to positive effect, extremely high relative humidity over 99% accelerated biological colonization inside the Seokbinggo.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.44 no.4
• /
• pp.139-148
• /
• 2002

Pilot study was performed to examine the feasibility of the pond system for further polishing of treatment wetland effluent from December 2000 to June 2001. The wetland system used for the experiment was highly effective to treat the sewage during the growing season, but it was less effective and its effluent was still high to discharge to the receiving water body. Therefore, the wetland effluent may need further treatment to prevent water quality degradation. Pond system could be used to hold and further polish the wetland effluent during the winter season and ots feasibility was evaluated in this study. Additional water quality improvement was apparent in the pond system during winter season, and the pond effluent could be good enough to meet the effluent water quality standards if it is properly managed. Timing of the pond effluent discharge appears to be critical for pond system management because it is a closed system and whole water quality constituents are affected by physical, chemical, and biological pond environments. Once algae started to grow in mid-April, constituents in the pond water column interact each other actively and its control becomes more complicated. Therefore, upper layer of the pond water column which is clearer than the lower layer my need be discharged in March right after ice cover melted. In the experiment, water quality of the upper water column was markedly clear in March than ant other times probably because of freezing-thawing effect. The remaining lower water column could be further treated by natural purification as temperature goes up or diluted with better quality of wetland effluent for appropriate water uses. This study demonstrated the feasibility of pond system for subsequent management of wetland effluent during the winter season, however, more study is needed for field application.

• Korean Journal of Food Science and Technology
• /
• v.27 no.4
• /
• pp.546-554
• /
• 1995

Vacuum cooling of crisphead lettuce by pilot-scale vacuum cooling apparatus, transportation under the conventional and cold-chain systems and distribution were carried out for its freshness prolongation and application of cold-chain system for fresh fruits and vegetables. Changes in temperatures of crisphead lettuce were also measured during transportation. $Q_{10}$ value for respiration rate of crisphead lettuce was $1.7{\sim}2.4$ and its initial freezing point was $-0.2^{\circ}C$. Cooling the vegetable to $0^{\circ}C$ was possible in less than 30 minutes by vacuum cooling. The shelf-life was extended by more than 90% by the combination of vacuum cooling and low temperature distribution.

• Journal of Korea Foundry Society
• /
• v.31 no.5
• /
• pp.293-301
• /
• 2011

Representative magnesium alloys applied to the die-casting are AZ91, AM60, etc., and the application of these alloys is restricted to components operating at moderate temperatures, due to grain boundary siding of ${\beta}$-phase($Mg_{17}Al_{12}$) at temperatures above $120^{\circ}C$. Heat-resistant magnesium alloys such as AE42, AE44 have been developed, but that have been too burdensome to produce because of the expensive rare earth materials. Research work for the development of low-priced heat-resistant magnesium alloy is actively in progress and positive results are being reported. This study aims to investigate the effect of Ca additions on mechanical properties of Mg-4Al-2Sn heat resistant magnesium alloys. Mg-4Al-2Sn alloys with Ca (0wt.%, 0.3wt.%, 0.7wt.%, 1wt.%) have been produced through the die-casting process for the development of low-priced heat-resistant magnesium alloy, and high temperature tensile tests are performed using the specimens. The results showed that mechanical properties of Mg-4Al-2Sn-xCa increased with the addition of Ca up to 0.7wt.% Ca and further addition of Ca deteriorated the mechanical properties of the alloys. A significant amount of porosity was observed at the sample with 1wt%. Ca and the longer freezing range of the alloy was believed to cause the formation of porosity.

• Journal of the Korean Geosynthetics Society
• /
• v.12 no.2
• /
• pp.1-11
• /
• 2013

Water content of subgrade soil in water supply systems has a large effect on performance. Many researchers lately make use of time-domain reflectometry (TDR) probes to measure the soil water content of subgrade soil from monitoring. The laboratory calibration test of TDR probe should be performed with soil field, because TDR probe can cause an error by type, gradation, density, and temperature of soil. This study shows the laboratory calibration test using TDR CS616, TDR-P3, TDR-T3. The calibration equations of TDR were then proposed. It was confirmed from the study that the data of TDR probe monitored in field could be used to estimate the freezing, unfrozen water content, and matric suction of soil.

• Journal of the Korea Safety Management & Science
• /
• v.16 no.2
• /
• pp.211-216
• /
• 2014

Using a high-rise building water piping after hydrostatic test of the reliability of the leak to be completed if the pressure is maintained until the leak is not commercially available considered. Due to the nature of high-rise buildings and the construction period will take several years from the lower levels of use of the water supply and fire fighting water pipe construction is in progress, the order of which I do most of the first pipe to the construction and more than three years. So kind of riser pipe is complete, install the valve in the basement by installing an automatic pump to maintain a constant pressure after hydrostatic test and after each floor plumbing piping is complete, the progress of the hydrostatic test without undergoing a separate branch pipe the valve is opened automatically when the number of the pressing pressure of the structure. I kind of do and keep working pressure of pipe until the completion of the construction work to keep the damage to human error when it is intended to prepare. In winter, the frost protection and an alternative to drainage water pipe is damaged or deformed, even if unaware of the finishing work to the building, the use of the damage caused by a leak in a after construction of finish work to be expected. Alternative to reduce this damage if the pressure test without fear of freezing to help maintain long-term commercial pressures may be considered.