• Journal of the Korean Wood Science and Technology
• /
• v.25 no.3
• /
• pp.66-74
• /
• 1997

Liquid permeabilities of red oak and several softwoods were measured by the pressure bomb method and a modified liquid permeability method in order to investigate their efficacy. The effect of preboiling and prefreezing on wood permeability were also examined for both green and resaturated specimens. Regardless of some disadvantages these two methods were revealed as a handy tool for quick evaluation of the permeability of an unknown species. The permeabilities of the resaturated specimens increased when preboiled. but decreased when prefrozen. For green specimens, however, pre freezing increased permeability. The discrepancy of the pre freezing effect on two specimens partially attributes to their difference of initial permeabilities. For all species except radiata pine heartwood, the radii of the effective capillary pores, derived from the water potential equation, distribute from $0.42{\mu}m$ to $7.2{\mu}m$. Those of radiata pine heartwood are below $0.46{\mu}m$.

• Advances in materials Research
• /
• v.1 no.4
• /
• pp.269-284
• /
• 2012

Thermoresponsive hydrogels based on N-Isopropylacrylamide (NIPAM) and 2-Hydroxyethylacrylate (HEA) were prepared by free radical polymerization. The hydrogels were characterized by elemental (CHN) analysis, differential scanning calorimetry (DSC) and thermo gravimetric analysis (TGA). DSC thermogram showed two endothermic transitions which are due to hydration of water present in different environments. One near $0^{\circ}C$ called melting transition of ice and was used to calculate the quantitative determination of the amounts of freezing and non freezing water. The other transition above the ambient temperature was due to the combination of hydrophobic hydration and hydrophilic hydration which changes with the copolymer compositions. Swelling and deswelling studies of the hydrogels were carried out using the aqueous media, salt and urea solutions. The experimental results from swelling studies revealed that copolymers have lower rates of swelling and deswelling than the homopolymer.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.09a
• /
• pp.1030-1038
• /
• 2010

In order to design and construction of the Antarctic Continental Station at the Terra Nova Bay in the East Antarctic, ground characteristics for soil samples taken from the Antarctic. A series of laboratory tests were performed to investigate the variations of the thermal conductivity, the unfrozen water content according to the temperature change of the soil taken from the Antarctic. The temperature were low down below zero.

• Journal of Korean Society of Water and Wastewater
• /
• v.14 no.1
• /
• pp.117-126
• /
• 2000

Solubilization pretreatments were conducted to enhance the anaerobic digestion of the waste activated sludge. Four pretreatment techniques including heating, sonication freezing and thawing, and enzyme addition were employed to solubilize the waste activated sludge under various conditions. Thermal pretreatment by heating showed the highest efficiency compared with other methods, and freezing and thawing was confirmed as a feasible alternative of solubilization as well as the pretreatment of dewatering. There is a clear correlation between the solubilization efficiency of the waste activated sludge and the gas production. Batch digestion results showed the cumulative gas production as much as four times after thermal pretreatment as compared with that by the control sludge without pretreatment. As a result, hydrolysis or solubilization pretreatment might play a significant role in the high rate digestion of the waste activated sludge.

• Journal of Power System Engineering
• /
• v.14 no.3
• /
• pp.19-24
• /
• 2010

The purpose of this study is to develop a snow melting system using the pulsating heat pipe(PHP). The experimental apparatus is consisted of a PHP, a concrete structure, a constant water thermostatic bath and a flowmeter. The experiment was performed at the outdoor air temperature of $-8^{\circ}C$ and inlet temperature of hot water of $75^{\circ}C$. PHP is the closed and non-loop type heat exchanger which is charging R-410A as an operating fluid. As experimental results, the temperature profile of vertical and horizontal orientation of concrete structure was measured with operating time. The heat flux of the snow melting was required more than 300 $W/m^2$. We confirmed that the snow melting system using the PHP was useful for anti-freezing road.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.10a
• /
• pp.497-502
• /
• 2000

This study was performed to change the latex content for properties of freezing-thawing resistance. When styrene-butadiene latex is added to portland cement, aggregate and water, a concrete with the color, consistency and workability of ordinary conventional concrete results, but with 20% to 35% less water. When cured, the concrete consists of hydrated cement and aggregate interconnected by a film of latex particles. In general, increasing the amount of latex will produce concrete with increased tensile and flexural strength and lower modulus of elasticity. Air entrainment has been used in conventional concrete for the past 50 years to impart freeze-thaw resistance. Latex modified concrete does not need additional air entrainment for freeze-thaw resistance provided adequate cure occurs.

• Journal of Power System Engineering
• /
• v.17 no.2
• /
• pp.95-102
• /
• 2013

For vessels operating in the cold climate regions, the ballast water inside or hopper tanks above the waterline may be frozen, starting at the top of the tank and at the side walls. Therefore, countermeasures against freeze-up of the ballast tank such as air-bubbling system, hot steam injecting system, heating coil system and water circulating system are taken to prevent freeze-up phenomenon; however, there are no rigorous investigations of anti-freezing to examine the effectiveness and validity of systems against freeze-up of the ballast tank, in which the temperatures are about $-25^{\circ}C$ (ambient air temperature) and $0^{\circ}C$ (sea water), respectively. In this paper, to ensure reasonable specifications for cold regions if the measures from the above-mentioned systems against freeze-up are effective, the phenomenon of ballast tank freeze-up is simulated and discussed in low temperature conditions. With the results using the commercial CFD code, CFX 14, the most cost-effective solution is conducted to prevent being frozen along the outer surface.

• Archives of Pharmacal Research
• /
• v.25 no.4
• /
• pp.546-549
• /
• 2002

The impact of storage conditions on the permeability of porcine buccal mucosa to [$^3H$]water and [$^{14}C$]mannitol was assessed. The fresh pocine buccal tissue (fresh tissue) was obtained by utilizing pig heads within 24 hours of slaughter. The stored and frozen porcine buccal tissues (stored tissue and frozen tissue) were obtained after the storage of the tissue intact in the pig heads at $4^{\circ}C$ or -$20^{\circ}C$, respectively, for 24 h. The results demonstrated that the barrier properties of the porcine buccal mucosa were maintained with regard to [$^3H$]water permeability when stored at $4^{\circ}C$ for 24 h. However, freezing the tissue resulted in tissue damage illustrated by a significant increase in [$^3$H]water permeability. [$^{14}C$]Mannitol does not appear to be a suitable model solute to assess the ex vivo permeability of porcine buccal mucosa due to its extremely low permeability.

• Journal of Power System Engineering
• /
• v.17 no.5
• /
• pp.30-37
• /
• 2013

For vessels operating in the cold climate regions, the ballast water inside or hopper tanks above the waterline may be frozen, starting at the top of the tank and at the side walls. Therefore, countermeasures against freeze-up of the ballast tank such as air-bubbling system, hot steam injecting system, heating coil system and water circulating system are taken to prevent freeze-up phenomenon; however, there are no rigorous investigations of anti-freezing to examine the effectiveness and validity of systems against freeze-up of the ballast tank, in which the temperatures are about -$25^{\circ}C$ (ambient air temperature) and $0^{\circ}C$ (sea water), respectively. In this paper, to ensure reasonable specifications for cold regions if the measures from the above-mentioned systems against freeze-up are effective, the phenomenon of ballast tank freeze-up is simulated and discussed in low temperature conditions. With the results using the commercial CFD code, CFX 14, the most cost-effective solution is conducted to prevent being frozen along the outer surface.

• Korean Journal of Animal Reproduction
• /
• v.16 no.2
• /
• pp.125-131
• /
• 1992

This study was carried out to investigate the effects of concentration and equilibration time of cryoprotective agents on the survival rate of slowly and ultrarapidly frozen porcine embryos. The porcine embryos following dehydration by cryoprotective agents and a various concentration of sucrose were directly plunged into liquid nitrogen and thawed in 38$^{\circ}C$ water bath. Survival rate was defined as development rat to the morula and blastocyst stage after in vitro culture or by FDA test. The results are summarized as follows : 1. The survival rates of porcine embryos after ultrarapid frozen-thawing in the freezing medium of 0.25M sucrose added 2.0, 2.5, 3.0, 3.5, or 4.0M glycerol was 65.3, 61.8, 64.3, 59.4 or 39.4%, respectively. Addition of 0.25M sucrose into the freezing medium containing 2.0M glycerol showed higher survival rate than those of 2.5~4.0M glycerol. 2. The survival rates of porcine embryos after ultraradpid frozen-thawing in the freezing medium of 0.25M sucroese added 2.0, 2.5, 3.0, 3.5 or 4.0M DMSO was 65.6, 67.6, 68.6, 60.6 or 23.6%, respectively. However, addition of 0.25M sucrose into the freezing medium containing 3.0M DMSO showed higher survival rate than those of 2.0, 2.5, 3.5 or 4.0M DMSO. 3. The survival rates of porcine embryos after ultrapid frozen-thawing in the freezing medium of 0.25M sucrose added 2.0, 2.5, 3.0, 3.5 or 4.0M propanediol was 63.2, 60.3, 62.1, 52.3 or 24.3%, respectively. Addition of 0.25M sucroese into the freezing medium containing 2.0M propanediol showed higher survival rate than those of 2.5~4.0M glycerol. 4. The survival rates of porcine embryos after ultrarapid frozen-thawing the freezing medium of 2.0M glycerol added 0.10, 0.25, 0.50 or 0.75M sucrose was 61.8, 70.8, 67.6 or 52.2%, respectively. Addition of 2.0M glycerol into the freezing medium containing 0.25M sucreose showed higher survival rate than that those of 0.10, 0.50 or 0.75M sucrose. 5. The higher suvival rate of porcine embryos were attained at short period of equilibration time 92.5~5min.) in the freezing medium added 0.25M sucreose and 3.0M compared to those of 10 or 20min. equilibration time in the same condition.