• 한국터널지하공간학회 논문집
• /
• 제20권6호
• /
• pp.957-972
• /
• 2018

한랭지역에 건설된 터널은 내 외부의 온도변화에 의해 갱구부 또는 환기구와 같이 특정한 구간에서 외부 온도변화의 영향으로 균열, 누수 등을 비롯한 심각한 결함이 발생할 수 있다. 이러한 동결-융해로 인한 터널의 결함을 방지하기 위해서는 동결 피해가 우려되는 구간에 대해서 적절한 동결 피해 방지 대책을 적용하여야 하지만 동결-융해 조건을 판단하는 구체적인 기준은 제시되어 있지 않다. 본 연구에서는 국내 터널의 정밀안전진단 결과를 통해 강원지역의 동결피해 현황을 분석하였으며 향후 한랭지역 터널의 동결피해 저감을 위한 설계 및 유지관리에 활용할 수 있도록 동결-융해 반복일수(F) 조건에 따른 국내 동결피해 가능지역을 분류하고자 한다. 따라서 한랭지역 터널의 동결피해 사례분석과 국내 외 동해환경 평가기준을 바탕으로 콘크리트 시험체의 온도변화에 대한 실내실험을 실시하였으며 실험적 검토결과를 기반으로 시간 및 온도변화에 따른 열류량(W) 분석을 실시하였다. 최종적으로 열류량(W) 분석결과와 국내의 기후특성을 고려하여 동결-융해 반복일(F)에 대한 조건을 제안하였으며, 동절기 동결피해에 대비하여 효율적인 설계 및 유지관리에 활용할 수 있도록 국내 한랭지역을 분류하였다.

• Food Science and Biotechnology
• /
• 제18권2호
• /
• pp.330-335
• /
• 2009

The principal objective of this study was to investigate changes in ice dendrite size during the freezing of tuna, in order to formulate a mathematical model of ice dendrite size. The tuna was frozen via a uni-directional heat transfer. Thermogram analysis allowed us to determine the position of the freezing front versus time, which is referred to as the freezing front rate. The morphology of the ice dendrites was assessed via scanning electron microscopy after freeze-drying, and the retained pore size was measured as ice dendrites. We noted that the mean size of ice dendrites increased with the distance to the cooling plate; however, it decreased with reductions in the cooling rate and the cooling temperature. In addition, shorter durations of the freeze-drying process decreased the freezing front rate, resulting in a larger size of the ice dendrite pores that operate as water vapor sublimation channels. According to our results, we could derive a linear regression as an empirical mathematical model equation between the ice dendrite size and the inverse of the freezing front rate.

• 한국재난정보학회 논문집
• /
• 제12권1호
• /
• pp.98-104
• /
• 2016

본 연구에서는 PVC 오수받이를 대상으로 상용 프로그램인 FEM LAB(ver. 3.2)을 이용하여 여러 시공 환경조건에서 오수받이 내부에 설치된 악취방지용 Z형 트랩 내부에 잔류하고 있는 물의 겨울철 동결여부를 평가하였다. 시뮬레이션 결과 외부온도 $-20^{\circ}C$가 42일간 지속되더라도 토양이 건조한 상태라면 Z형 트랩에 남아 있는 물이 동결되지 않음을 알 수 있다. 토양이 습윤 상태일 경우 약 14일 정도, 토양이 일반상태의 경우 약 17일 정도가 지나면 Z형 트랩이 위치한 지면으로부터 60cm 지점이 Z형 트랩 내에 동결될 가능성이 있으나, 토양이 건조한 상태에 있을 경우에는 42일이 지나도 지면으로부터 60cm 지점은 영상의 온도를 유지하는 것으로 보아 Z형 트랩 내에 있는 물이 동결되지 않는다는 것을 알 수 있다.

• 설비공학논문집
• /
• 제17권5호
• /
• pp.459-467
• /
• 2005

The effect of anti freezing solution liquid film on the frost prevention is experimentally investigated. It is desirable that the antifreezing solution spreads widely on the heat exchanger surface forming thin liquid film to prevent frost nucleation and reduce the thermal resistance across the film. A porous layer coating technique is adopted to improve the wettedness of the anti freezing solution on a parallel plate heat exchanger. The antifreezing solution spreads widely on the heat exchanger surface with 100 $\mu$m thickness by the capillary force resulting from the porous structure. It is observed that the antifreezing solution liquid film prevents a parallel plate heat exchanger from frosting. The reductions of heat and mass transfer rate caused by thin liquid film are only $1\~2\%$ compared with those for non-liquid film surface.

• 설비공학논문집
• /
• 제29권6호
• /
• pp.289-296
• /
• 2017

This study aimed to analyze the deck floor heating system of an outdoor swimming pool in terms of the thermal capacity/output and the surface temperature distribution based on the outdoor temperature, to design for anti-freezing during winter. Through the transient heat transfer simulation with PHYSIBEL and theoretical equations, the surface temperature distribution of the floor heating system at two outdoor conditions in Jeju, were calculated and evaluated. The results indicate that the specific thermal output required for maintaining $4^{\circ}C$ surface temperature at the design outdoor temperature of $0.1^{\circ}C$, was about $90W/m^2$. This performance analysis can be applied for future design criteria, including optimizations of system capacity and size.

• 설비공학논문집
• /
• 제10권6호
• /
• pp.753-762
• /
• 1998

A domestic refrigerator is composed of many components such as a compressor, evaporator, capillary tube, and the cabinet which plays a great role on the cycle performance, even if it is not the basic component part in the cycle. Recently, the restriction policy on the energy-saving and environmentally friendly refrigerator is reinforced in our nation as well as developed countries. Therefore, in this paper, cycle simulations and experiments were carried out ito understand the characteristics of the cycle performance using CFC 12, HFC 134a, and HC 600a and to know how changes in UA(overall heat transfer coefficients$\times$ heat transfer area) of evaporator, the position displacement of compressor, and the rpm of fan in the freezing room which has influence on the cycle performance. The result shows that the quantitative values of simulation and experiment are not coincident, but their trend is similar. When HFC 134a and HC 600a were used without the change of design in refrigerator used CFC 12, the performance of system in HC 600a is 30% lower, and the case of HFC 134a is 10% lower than that of CFC 12 on freezing temperature.

• 설비공학논문집
• /
• 제18권6호
• /
• pp.477-485
• /
• 2006

A study on frost prevention of fin-tube heat exchanger is experimently performed by spreading antifreezing solution on heat exchanger surface. It is desirable that the antifreezing solution spreads completely on the surface forming thin liquid film to prevent frost nucleation and crystal growth and to reduce the thermal resistance across the liquid film. A small amount of antifreezing solution falls in drops on heat exchanger surface using two types of supplying devices, and a porous layer coating technique is adopted to enhance the wettedness of antifreezing solution on the surface. It is observed that the antifreezing solution liquid film prevents fin-tube heat exchanger from frosting, and heat transfer performance does not degrade through the frosting tests. The concentration of supplied antifreezing solution can be determined by heat transfer analysis of the first row of heat exchanger to avoid antifreezing solution freezing due to dilution by moisture absorption.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.963-966
• /
• 2009

A Construction of pipe line foundation and railroad, buildings in a permafrost area requires engineering technology of ground stabilization. In the permafrost area, thermal siphons have been used to stabilize foundation by eliminating the heat of ground to the air. the thermal siphon is a passive heat transfer device that operates by convection through vaporization and condensation. The heat transfer from ground to the air is driven by a temperature difference across the unit. A buried part in ground working as vaporizing function and upper part work as condensing. In this study, buried thermal siphon around the pipe lines laid in the Vladivostok site and measuring temperature variation. It is found that the thermal siphons freezing ground faster and decrease temperature variation in winter season.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.1689-1696
• /
• 2008

Heat pumps transfer heat by circulating a substance called a refrigerant through a cycle of evaporation and condensation. But Heat pumps system by only using heat-source is not efficient. Because the mean temperature of North Korean winter season is low, economy of air heat-source heat pump descend. This paper is practiced the simulation on evaluation criteria for Heat pump heating and cooling systems to Rolling Stock. Efficiency of the heat pump in order improving from certainly the development of the technique will be able to prevent a freezing actual condition must proceed. As a result, Below $-10^{\circ}C$ used heating and cooling systems of heat pump format even in cold winter season and is serviceable confirmed with heat source supply circle of the Rolling Stock.

• Journal of Advanced Marine Engineering and Technology
• /
• 제27권6호
• /
• pp.721-727
• /
• 2003

Freezing of turbulent water flow between two horizontal cooled parallel plates with the separated region has been investigated experimentally. The flow separation was induced by vertical plates (two-dimensional plates) situated at the inlet of the rectangular channel. The degree of flow separation was varied by employing vertical thin plates with various heights. Three kinds of the vertical plates with 8.0, 9.8 and 12.5 mm in height were utilized. The Reynolds number and cooling temperature ratio were ranged from $3.45\times10^3 to 1.73\times10^4$ and 7.0 to 20.0 respectively, The measurements show that the flow separation influenced remarkably on the local ice formation characteristics. The location of the first ice layer and the average heat transfer at the ice surface were found be correlated as a function of the Reynolds number, the cooling temperature ratio, and the orifice height ratio.