• Journal of Microbiology and Biotechnology
• /
• 제18권5호
• /
• pp.946-951
• /
• 2008

The opd gene, encoding organophosphorus hydrolase (OPH) from Flavobacterium sp. capable of degrading a wide range of organophosphate pesticides, was surface- and intracellular-expressed in Synechococcus PCC7942, a prime example of photoautotrophic cyanobacteria. OPH was displayed on the cyanobacterial cell surface using the truncated ice nucleation protein as an anchoring motif. A minor fraction of OPH was displayed onto the outermost surface of cyanobacterial cells, as verified by immunostaining visualized under confocal laser scanning microscopy and OPH activity analysis; however, a substantial fraction of OPH was buried in the cell wall, as demonstrated by proteinase K and lysozyme treatments. The cyanobacterial outer membrane acts as a substrate (paraoxon) diffusion barrier affecting whole-cell biodegradation efficiency. After freeze-thaw treatment, permeabilized whole cells with intracellular-expressed OPH exhibited 14-fold higher bioconversion efficiency ($V_{max}/K_m$) than that of cells with surface-expressed OPH. As cyanobacteria have simple growth requirements and are inexpensive to maintain, expression of OPH in cyanobacteria may lead to the development of a low-cost and low-maintenance biocatalyst that is useful for detoxification of organophosphate pesticides.

• 한국도로학회논문집
• /
• 제15권5호
• /
• pp.75-79
• /
• 2013

PURPOSES : The objective of this study is to evaluate the environmental resistance of bio-polymer concrete for use of pavement materials developed for reducing the carbon-dioxide. METHODS : The compression, tension, and bending strength tests were conducted on the bio-polymer concrete specimens with and without environmental conditioning. The specimens were conditioned using the freezing-thaw and accelerated weathering process for long period of time. To assess the resistance against chloride, the chloride ion penetration resistance tests were carried out on the bio-polymer concrete specimens. RESULTS : Test results show that the maximum difference in strength between specimens with and without conditioning is about 2.6MPa indicating that the effect of environmental conditioning on specimen strength is negligible. Based on the chloride ion penetration resistance test, the penetration quantity of electric charge of the specimens is zero and there is no ion penetration within the bio-polymer concrete. CONCLUSIONS : It is found from this study that there is slight change in strength of bio-polymer concretes before and after environmental conditioning process and no chloride ion penetration observed in these specimens. Therefore, the developed bio-polymer concretes can be applied effectively as pavement materials due to the small change of physical properties with environment change.

• Food Science and Biotechnology
• /
• 제15권3호
• /
• pp.453-457
• /
• 2006

Activity and stability of kiwifruit actinidine was determined in various conditions of pH, salt, and temperature using N-${\alpha}$-CBZ-lysine P-nitrophenyl ester as the substrate. Actinidine activity was low below pH 6, and undetectable below pH 3. The enzyme was stable in a pH range of 6.0-8.5. At $4^{\circ}C$ the enzyme was inactive in the presence of greater than 36% vinegar and in 2 M NaCl. Actinidine at $25^{\circ}C$ was unstable in 24% vinegar but stable in up to 3 M NaCl. With regard to freeze-thaw stability, actinidine retained 85% residual activity after being frozen at $-20^{\circ}C$ for 3 days. Based on Arrenius and Lineweaver-Burk plots, actinidine became unstable at greater than $45^{\circ}C$ with only 30% residual activity remaining after 6 min. The Km, kcat, and kcat/Km values of actinidine were $56\;{\mu}M$, 67/sec, and $1.2\;{\mu}M/sec$, respectively.

• Journal of Industrial and Engineering Chemistry
• /
• 제68권
• /
• pp.48-56
• /
• 2018

A potassium copper hexacyanoferrate (KCuHCF) embedded magnetic hydrogel bead (HCF-Mbead) was synthesized via a facile double crosslinking methods of $Fe^{3+}$ ionic binding and freeze-thaw for effective $Cs^+$ removal. The HCF-Mbead had a hierarchical porous structure facilitating fast access of $Cs^+$ ions to embedded active sites. The adsorbent showed enhanced $Cs^+$ removal properties in terms of capacity (69.2 mg/g), selectivity ($K_d=4{\times}10^4mL/g$, 1 ppm $Cs^+$ in seawater) and stability (>99.5% removal in pH 3~11) with rapid magnetic separation. This study further opens the possibility to develop an efficient material that links the integration of adsorption and recovery.

• Advances in concrete construction
• /
• 제5권6호
• /
• pp.671-683
• /
• 2017

Commonly used concrete in general, consists of cement, fine aggregate, coarse aggregate and water. Natural river sand is the most commonly used material as fine aggregate in concrete. One of the important requirements of concrete is that it should be durable under certain conditions of exposure. The durability of concrete is defined as its ability to resist weathering action, chemical attack or any other process of deterioration. Durable concrete will retain its original form, quality and serviceability when exposed to its environment. Deterioration can occur in various forms such as alkali aggregate expansion, freeze-thaw expansion, salt scaling by de-icing salts, shrinkage, attack on the reinforcement due to carbonation, sulphate attack on exposure to ground water, sea water attack and corrosion caused by salts. Addition of admixtures may control these effects. In this paper, an attempt has been made to replace part of fine aggregate by tailing material and part of cement by fly ash to improve the durability of concrete. The various durability tests performed were chemical attack tests such as sulphate attack, chloride attack and acid attack test and water absorption test. The concrete blend with 35% Tailing Material (TM) in place of river sand and 20% Fly Ash (FA) in place of OPC, has exhibited higher durability characteristics.

• 대한건축학회논문집:구조계
• /
• 제35권5호
• /
• pp.153-160
• /
• 2019

The purpose of this study was to investigate the mechanical and durability characteristics of latex-modified concrete using ultra rapid hardening cement : four types of mechanical tests including compressive strength, modulus of elasticity, flexural strength and bond strength were performed; and seven types of durability tests including resistance of concrete to chloride ion penetration, freeze-thaw resistance, scaling resistance, coefficient of thermal expansion, cracking tendency, abrasion resistance and drying shrinkage were performed. Required material performance of each test was determined in accordance with the Korea specification for repair of concrete and pavement repairing materials. The test results satisfied the required material performances, and presented a good mechanical and durability characteristics. In particularly, the materials showed early development of compressive strength, flexural strength and bond strength at 3 and 4 hours after curing. SEM photos were also taken to investigate the micro structures of the materials after chloride ion penetration test.

• Computers and Concrete
• /
• 제29권 5호
• /
• pp.335-346
• /
• 2022

Geopolymers are an important alternative material supporting recycling, sustainability, and waste management. Durability properties are among the most critical parameters to be investigated; in this study, the durability of manufactured geopolymer samples under the attack of 10% magnesium sulfate and 10% sodium sulfate solution was investigated. 180 cycles of freezing and thawing were also tested. The experimentally obtained results investigate the durability of geopolymer mortar prepared with fly ash (class F) and alkali activator. Three different quarry dust wastes replaced the river sand aggregate: limestone, marble, and basalt powder as fine filler aggregate in three different replacement ratios of 25%, 50%, and 75% to produce ten series of geopolymer composites. The geopolymer samples' visual appearance, weight changes, UPV, and strength properties were studied for up to 12 months at different time intervals of exposure to sulfate solutions to investigate sulfate resistance. In addition, Scanning Electron Microscopy (SEM), EDS, and XRD were used to study the microstructure of the samples. It was beneficial to include quarry waste as a filler aggregate in durability and mechanical properties. The compact matrix was demonstrated by microstructural analysis of the manufactured specimens. The geopolymer mortars immersed in sodium sulfate showed less strength reduction and deterioration than magnesium sulfate, indicating that magnesium sulfate is more aggressive than sodium sulfate. Therefore, it is concluded that using waste dust interrogation with partial replacement of river sand with fly ash-based geopolymers has satisfactory results in terms of durability properties of freeze-thaw and sulfate resistance.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 봄 학술논문 발표대회
• /
• pp.195-196
• /
• 2021

The pore distribution of the cement mortar mixed with carbon nanotubes was found to have a large number of pores at (370~80)㎛, and the distribution ratio was larger as the carbon nanotubes were mixed. However, the pores with a fine particle diameter of (10-0.5) ㎛ were found to be larger as the carbon nanotubes were incorporated. However, the distribution of pores of the test specimens of conductive cement mortar with deterioration damage was found to be distributed in a number of particle diameters of (500 to 100) ㎛ and (10 to 0.5) ㎛. It is judged that the particle diameter of the internal pores increased due to the damage. However, as the mixing ratio of the test specimen with carbon nanotubes increased, the distribution of voids was relatively lower than that of plain, and it was judged to have excellent resistance to deterioration damage.

• 동아시아식생활학회지
• /
• 제25권5호
• /
• pp.893-901
• /
• 2015

This study investigated the effects of thawing conditions on physiological activities and quality of peeled garlic. Peeled frozen garlic was analyzed after thawing at low temperature ($4^{\circ}C$), room temperature ($20^{\circ}C$), tap water ($20^{\circ}C$), radio frequency of 27.12 MHz, and 2.45 GHz in a microwave. As a result, the time required to thaw garlic to $0^{\circ}C$ by various thawing methods was shortest at2.45 GHz in a microwave, followed by $20^{\circ}C$ tap water, radio frequency of 27.12 MHz, $20^{\circ}C$, and $4^{\circ}C$. Microwave thawing was faster than other methods, but it resulted in significant non-uniformity of heating. The hardness of peeled garlic significantly decreased upon freeze-thawing, whereas it showed improved hardness upon radio-frequency thawing. Total color difference in garlic increased upon freeze-thawing, and it was not improved by various thawing methods. Antioxidant activities were determined for DPPH radical scavenging ability, SOD-like activity, and reducing power. Total phenolic compounds and flavonoids in garlic extract were measured as $3.222{\pm}0.214{\mu}g$ GAE/g and $0.149{\pm}0.03{\mu}g$ QE/g, respectively. The content of total phenolic compounds was significantly reduced by 2.45 GHz microwave thawing ($1.90{\pm}0.02{\mu}g$ GAE/g); however, flavonoid contents were slightly reduced under freezing and thawing conditions. The DPPH radical scavenging ability of garlic extracts was not affected by thawing methods; however, SOD-like activity and reducing power were slightly reduced by freeze-thawing. These results indicate that physiological activities were not improved by radio-frequency thawing; however, thawing time and maintain hardness were reduced compared with conventional thawing methods.

• Asian-Australasian Journal of Animal Sciences
• /
• 제22권4호
• /
• pp.507-515
• /
• 2009

A series of experiments were conducted to determine the suitable freezing and thawing temperatures for the freezing of boar semen in 5 ml maxi-straws. The ultrastructure, in vitro fertilization (IVF) and artificial insemination (AI) of frozen-thawed semen were also be evaluated. The 5 cm freezing height gave the best results not only in post-thaw motility rate (54.00%), but also in normal acrosome morphology rate (NAR) (80.23%). There was no significant difference in the post-thaw motility between different thawing temperatures and corresponding thawing times (p>0.05); the group of $52^{\circ}C$ and 25 s gave the highest motility rate (45.00%). As a whole, not only from the motility but also the NAR, thawing at $42^{\circ}C$ was better than the other two treatments. In the freezing packages, 5 ml maxi-straw gave a little lower mobility (40%), viability rate (49.58%), plasma membrane integrity rate (53.91%) and NAR (52.65%) than the 0.25 ml straw, but there was no significant difference between the two straw volumes (p>0.05). The IVF capacity of frozen-thawed semen in this experiment was similar to fresh semen. From ultrastructure observation, the main damage to boar spermatozoa after freezing was seen in the acrosome, such as swelling and formation of vesicles. After AI in recipient Shanghai White sows, frozen-thawed semen from 5 ml maxi-straws and pellets produced 72.2% and 80% conception rate and 7.8 and 8 litter sizes, respectively, and there was no significant difference between the 5 ml maxi-straw and the pellet (p>0.05).