• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 1992년도 수공학연구발표회논문집
• /
• pp.133-141
• /
• 1992

A three water-intake structure designed to built along the right bank of the Missouri River near Chesterfield, Missouri was model-tested at an undistorted scale of 1:5. Although the discharge capacity of each of six pumps to be installed is only 21,000 gpm, the model indicated strong flow circuation and unstable free-surface conditions as flow entered the two-pump bay through a narrow sluice opening at an angle. Strong free-surface vartices were also observed in the model. The sump modifications developed in the study included an array of baffle bars, a perforated plate, floor splitters, and floor-corner fillets. The solutions developed in this study could be applied to other pump sumps with multiple pump units.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 1998년도 추계 학술대회논문집
• /
• pp.108-113
• /
• 1998

A numerical investigation for the flow, heat and mass transfer characteristics of the grooved evaporating tube with the films flowing down on both the inside and outside tube walls has been carried out. The condensation occurs along the outside wall while the evaporation takes place at the free surface of the inside film. The 3-D transport equations for momentum and energy are solved by using the FVM(Finite Volume Method). The free surface shape is tracked by the moving grid technique satisfying the SCL(Space Conservation Rule). Due to the secondary motion of the fluid, the film thins at the crest, while thickens at the valley. The velocity and temperature fields as well as the amounts of the condensed and evaporated mass have been successfully predicted for various operating conditions and groove shapes.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 1998년도 추계 학술대회논문집
• /
• pp.167-174
• /
• 1998

The numerical methodology for simulating water entry behaviors of the high-speed bodies has been developed. Since the present method assumed the impact occurs within a very short time interval, the viscous effects do not have enough time to play a significant role in the impact forces, that is, the flow around a water-entry object was assumed as an incompressible potential flow and is solved by the source panel method. The elements fully submerged into the water are routinely teated, but the elements intersected by the effective planar free surface are redefined and reorganized to be amenable to the source panel method. To validate the present code, it has been applied to the ogive model and compared with experimental data. Good agreement has been obtained. The water entry behavior of the bouncing phenomena from the free surface has been also simulated using the impact forces and two degree of freedom dynamic equation. Physically, acceptable results have been obtained.

• 한국가시화정보학회:학술대회논문집
• /
• 한국가시화정보학회 2004년도 추계학술대회 논문집
• /
• pp.26-29
• /
• 2004

In this paper, we report the numerical and experimental solutions of the dynamic characteristics of a vortex ring in a circular cylinder generated by impinging a fluid blob from a hole on the bottom wall of the cylinder. We managed to visualize successfully the flow pattern shown on the vertical and horizontal planes by using a specially designed optical apparatus. Results of three-dimensional computation for the flow are shown to be in a satisfactory agreement with the experimental ones. We also report the experimental results which show a breaking of the axi-symmetric pattern after the vortex touches the free surface.

• 대한기계학회논문집B
• /
• 제25권12호
• /
• pp.1821-1830
• /
• 2001

The flow around free end of a finite circular cylinder (FC) embedded in an atmospheric boundary layer has been investigated experimentally. The experiments were carried out in a closed-return type subsonic wind tunnel with varying aspect ratio of the finite cylinder mounted vertically on a flat plate. The wakes behind a 2-D cylinder and a finite cylinder located in a uniform flow were measured for comparison. Reynolds number based on the cylinder diameter was about Re=20,000. A hot-wire anemometer was employed to measure the wake velocity and the mean pressure distributions on the cylinder surface were also measured. The flow past the FC free end shows a complicated three-dimensional wake structure and flow phenomenon is quite different from that of 2-D cylinder. The three-dimensional flow structure was attributed to the downwashing counter rotating vortices separated from the FC free end. As the FC aspect ratio decreases, the vortex shedding frequency decreases and the vortex formation length increases compared to that of 2-D cylinder. Due to the descending counter-rotating twin-vortex, near the FC free end, regular vortex shedding from the cylinder is suppressed and the vortex formation region is hardly distinguished. Around the center of the wake, the mean velocity for the FC located in atmospheric boundary layer has large velocity deficit compared to that of uniform flow.

• 한국해양환경ㆍ에너지학회지
• /
• 제16권4호
• /
• pp.255-262
• /
• 2013

본 연구에서는 연속체 이론을 배경으로 하며 일반적으로 많이 사용되는 Navire-Stokes방정식이 아닌 입자의 확률분포를 배경으로 하는 Boltzmann 방정식을 이용하여 자유수면을 포함하는 유동을 해석하는 전산시뮬레이션 코드를 개발하였다. 댐 붕괴시뮬레이션에 적용하여 코드의 검증을 수행하였으며, 기존의 실험 및 계산결과와 비교함과 동시에 격자볼츠만 시뮬레이션의 특성을 분석하였다. 공학적 응용을 위해서 임의 형상의 물체가 존재시에 자유수면 시뮬레이션도 수행하였다.

• International Journal of Ocean System Engineering
• /
• 제1권3호
• /
• pp.136-143
• /
• 2011

In this paper, three-dimensional free-surface flows are simulated by using two different numerical methods, the constrained interpolation profile (CIP)-based and finite volume (FV)-based methods. In the CIP-based method, the governing equations are solved on stationary staggered Cartesian grids by a finite difference method, and an immersed boundary technique is applied to deal with wave-body interactions. In the FV-based method, the governing equations are solved by applying collocated finite volume discretization, and body-fitted meshes are used. A free-surface boundary is considered as the interface of the multi-phase flow with air and water, and a volumeof-fluid (VOF) approach is applied to trace the free surface. Among many variations of the VOF-type method, the tangent of hyperbola for interface capturing (THINC) and the compressive interface capturing scheme for arbitrary meshes (CICSAM) techniques are used in the CIP-based method and FV-based method, respectively. Numerical simulations have been carried out for dam-breaking and wave-body interaction problems. The computational results of the two methods are compared with experimental data and their differences are observed.

• Nuclear Engineering and Technology
• /
• 제48권2호
• /
• pp.360-367
• /
• 2016

A windowless spallation target can provide a neutron source and maintain neutron chain reaction for a subcritical reactor, and is a key component of China's nuclear waste transmutation of coupling accelerator and subcritical reactor. The main issue of the windowless target design is to form a stable and controllable free surface that can ensure that energy spectrum distribution is acquired for the neutron physical design when the high energy proton beam beats the lead-bismuth eutectic in the spallation target area. In this study, morphology and flow characteristics of the free surface of the windowless target were analyzed through the volume of fluid model using computational fluid dynamics simulation, and the results show that the outlet cross section size of the target is the key to form a stable and controllable free surface, as well as the outlet with an arc transition. The optimization parameter of the target design, in which the radius of outlet cross section is $60{\pm}1mm$, is verified to form a stable and controllable free surface and to reduce the formation of air bubbles. This work can function as a reference for carrying out engineering design of windowless target and for verification experiments.

• 대한조선학회논문집
• /
• 제39권1호
• /
• pp.8-15
• /
• 2002

B-spline을 이용하여 물체의 형상과 포텐셜을 표현함으로써, 저차경계요소법의 단점들을 극복하고 수치계산의 정도를 높이기 위한 고차 패널법을 개발하였다. 물체표면과 자유표면에 법선 다이폴과 쏘스를 분포시켰으며, 자유표면 및 방사조건을 만족시키기 위해 상류차분식을 사용하는 대신 B-spline의 기저함수를 미분하여 선형화된 자유표면 경계조건에 직접 적용하였다. 이 방법을 적용함으로써 Dawson 방법에서 문제가 되었던 수치감쇠 문제를 피할 수 있었다. 수치계산 프로그램을 검증하기 위해 2차원 원주주위의 유동계산과 날개면 주위의 유동해석을 수행하였으며, B-spline 기저 고차패널법에 의한 수치계산 결과가 저차패널법에 비해 빠른 수렴성과 정확성을 보였고 계산에 필요한 패널 수가 현저히 줄어드는 대단히 만족스러운 결과를 얻었다.

• 대한조선학회논문집
• /
• 제31권2호
• /
• pp.45-56
• /
• 1994

2차원 수중익 주위의 비선형 자유표면 유동을 시간영역에서 시뮬레이션할 수 있는 수치해법이 개발되었다. 본 수치해법은 고차 스펙트럴법과 경계요소법을 조합한 스펙트럴/경계요소법(spectral/boundary-element method)이며, 자유표면은 고차 스펙트럴법에 의해 그리고 수중익과 후류 보오텍스는 경계요소법에 의해 다루어 진다. 본 방법은 자유표면과 수중익의 비선형/비정상 상호작용문제에 폭넓게 적용될 수 있으며, 특히 스펙트럴법을 사용하므로 자유표면 유동을 매우 효율적으로 다룰 수 있다. 적용예로 정지상태에서 출발하여 자유표면 근처에서 균속 전진운동 또는 전진 및 동요운동을 하는 경우가 다루어 졌고, 자유표면파와 동유체력에서의 비선형/비정상 효과들이 보여지고 있다. 비정상해의 특수한 경우로 얻어지는 정상상태의 계산결과들이 다른 이론 또는 실험결과들과 비교되었으며, 좋은 일치를 보이고 있다.