• Journal of Welding and Joining
• /
• v.30 no.2
• /
• pp.54-58
• /
• 2012

Al-coated steel sheets with excellent heat and corrosion resistance are widely used in various applications. In welding of thin plate, some defects such as unmelted zone and metal-through occur easily in the beginning and ending of welding line. In the study, the welding defects in Al-coated steel sheets were investigated with respect to plasma arc current, height between Cu block and base metals, and using a roller to align the height of the base metal. Full penetration and voids free welds were obtained with a plasma arc current 52A and weld speed 2.3m/min. An unmelted zone increased and Ericshen rate decreased as the height between Cu block and base metal increased from 0 to 0.6mm. Using a roller moving ahead of the plasma arc, the length of unmelted zone decreased from 1.7mm to 0.5mm.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.20 no.10
• /
• pp.3322-3333
• /
• 1996

A numerical analysis has been conducted to investigate a modified floating-zone crystal growth process in which most of the melt surface is covered with a heated ring. The crystal rod is not only pulled downward but rotated around its axisymmetric line during crystal growth process in order to produce the flat interface of crystal growth and the single crystal growth of NaNO3 is considered in 6mm diameter. The present study is made from a full-equation-based analysis considering a pulling velocity in all of solid and liquid domains and both of solid-liquid interfaces are tracked simultaneously with a governing equation in each domain. Numerical results are mainly presented for the comparison of the surface shape of rotational crystal rod with that of no-rotational crystal rod and the effects of revolution speeds of the crystal rod. Results show that the rotation of crystal rod produces more its flat surface. In addition, the shape of crystal growth near the centerline is more concaved with the increase in the revolution speed of crystal rod. The flow pattern and temperature distribution is analyzed and presented in each case. As the pulling velocity of crystal rod is increasing, the free surface of the melt below the heated ring is enlarged due to the crystal interface migrating downward.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2013.12a
• /
• pp.66-72
• /
• 2013

The demand for an ice class ship is rising expected to rise according to the increase of energy consumption and the opening of arctic sea routes. Ice class ship should be designed to cope with the severe environmental conditions of arctic sea such as a high mechanical impact and abrasion damage, caused by pack ice, ice bergs and low temperature. The ice class ship hulls are coated with an anti-abrasion and low friction coating such as a solvent free epoxy or high solid-volume epoxy. These coatings require two-component heating pump and a high grade surface preparation. In this study, the coating performances for the arctic vessels, such as puncture absorbed energy, abrasive wear loss, friction coefficients and impact absorbed energy were evaluated. Based on this study, a proper coating performance specification for the arctic vessels was proposed and coating selection guideline in terms of coating performance and workability was also established.

• Asian-Australasian Journal of Animal Sciences
• /
• v.9 no.2
• /
• pp.123-126
• /
• 1996

Sixteen Harnai males were used to evaluate the influence of varying levels of fourwing saltbush hay on feed and water intakes as well as the blood serum mineral status in a completely randomized design. The animals were grouped randomly into four, with four animals in each. The four groups were randomly allotted low, medium, high and very high levels of saltbush hay supplementation in addition to wheat straw. The animals were given fresh water at free of choice. Weekly body weight was recorded for each individual animal. Blood serum was collected for mineral contents. The experiment lasted for eight weeks. The inclusion of saltbush leaves in the diet showed a non-significant effect on the total dry matter intake. There has been a significant increase in the water intake when very high levels of saltbush were included in the ration. Lower levels showed no effect on the water intake. The animals maintained their body weight from week 1 to week 8. No treatment by weeks interactions on the potassium and sodium levels were detected. However higher levels of saltbush increased significantly the potassium and sodium contents in the serum. Calcium contents were significantly(p<0.01) lowered with the inclusion of saltbush leaves in the diet. Whereas Phosphorous contents showed an increasing(p<0.05) trend with the higher levels of saltbush. No clinical or sub-clinical toxicological symptoms were observed in the sheep with the higher mineral contents.

• Computers and Concrete
• /
• v.1 no.1
• /
• pp.47-60
• /
• 2004

The influence of the fracture process zone (FPZ) on the fracture properties is one of the hottest topics in the field of fracture mechanics for cementitious materials. Within the FPZ in front of a traction free crack, cohesive forces are distributed in accordance with the softening stress-separation constitutive relation of the material. Therefore, further crack propagation necessitates energy dissipation, which is the work done by the cohesive forces. In this paper $g_f$, the local fracture energy characterizing the energy consumption due to the cohesive forces, is discussed. The computational expression of $g_f$ in the FPZ can be obtained for any stage during the material fracture process regarding the variation of FPZ, whether in terms of its length or width. $G_{fa}$, the average energy consumption along the crack extension region, has also been computed and discussed in this paper. The experimental results obtained from the wedge splitting tests on specimens with different initial notch ratios are employed to investigate the property of the local fracture energy $g_f$ and the average value $G_{fa}$ over the crack extension length. These results can be used to indicate the influence of the FPZ. Additionally, changes in the length of the FPZ during the fracture process are also studied.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.10 no.6
• /
• pp.146-151
• /
• 2011

Wax spin coating is a part of several wafer handling processes in the silicon wafer polishing station. It is important to ensure the wax layer free of contamination to achieve the high degree of planarization on wafers after wafer polishing. Three-dimensional air flow characteristics in a wax spin coater are numerically investigated using computational fluid dynamics techniques. When the bottom of the wax spin coater is closed, there exists a significant recirculation zone over the rotating ceramic block. This recirculation zone can be the source of wax layer contamination at any rotational speed and should be avoided to maintain high wafer polishing quality. Thus, four air suction ducts are installed at the bottom of the wax spin coater in order to control the air flow pattern over the ceramic block. Present computational results show that the air suction from the bottom is quite an effective method to remove or minimize the recirculation zone over the ceramic block and the wax coating layer.

• Journal of the Society of Naval Architects of Korea
• /
• v.58 no.2
• /
• pp.121-128
• /
• 2021

According to the increasing interest and demand for the Autonomous Surface Vessels (ASV), the autonomous navigation system is being developed such as obstacle detection, avoidance, and path planning. In general, autonomous navigation algorithm controls the ship by detecting the obstacles with various sensors and planning path for collision avoidance. This study aims to construct and prove autonomous algorithm with integrated various sensor using the Robot Operating System (ROS). In this study, the safety zone technique was used to avoid obstacles. The safety zone was selected by an algorithm to determine an obstacle-free area using 2D LiDAR. Then, drift angle of the ship was controlled by the propulsion difference of the port and starboard side that based on PID control. The algorithm performance was verified by participating in the 2020 Korea Autonomous BOAT (KABOAT).

• Journal of Korean Society of Forest Science
• /
• v.88 no.4
• /
• pp.454-461
• /
• 1999

The dynamics of root system in the fairy rings of Tricholoma matsutake was investigated in four zones divided into 'zone of decayed mycorrhizae', 'zone of mycorrhizae for fruiting', 'zone of physiologically active mycorrhizae' and 'zone of roots free from mycorrhizal infection'. The roots of Pinus densiflora in fairy rings, which occupied 70% of upper crown, comprised about 60% and 87% of total roots and alive roots, respectively. The ratio of fine-roots of P. densiflora over total roots was relatively higher than other species since that of P. densiflora was about 45% while that of the other species was about 13% on research of fine-roots. Especially, the roots of pine comprised about 70% of total root in the zone of mycorrhizae for fruiting and the zone of physiologically active mycorrhizae, which indicated that the pine roots were closely related to the fairy rings of T. matsutake. The fine roots of P. densiflora in the zone of physiologically active mycorrhizae was about 60.7%(1,087mg/100g soil) which was about twice compared to that of other zones. It allowed us to suppose that the fine roots of P. densiflora can make active growth in the zone of physiologically active mycorrhizae, and the growth was promoted by the fairy ring formation of T. matsutake. In addition, we found 3~5 times higher amount of fine roots than that of medium roots of P. densiflora in this zone, which indicated that the fairy rings of T. matsutake locate in the region of active growth of P. densiflora' roots.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.1
• /
• pp.77-87
• /
• 2003

The residual stress and birefringence in injection-molded plastic parts can be divided into the flow-induced residual stress and birefringence produced in flowing stage, the thermally-induced residual stress and birefringence produced in cooling stage. However, the physics involved in the generation of the thermally-induced residual stress and birefringence still remains to be understood. Because polymer experiences viscoelastic history near the glass-transition temperature it is hard to model the entire process. Volume relaxation phenomenon was included to predict the final thermally-induced residual stress and birefringence in quenched plastic parts more accurately. The present study focused on comparing the predicted values far thermally-induced residual stress and birefringence with and without volume relaxation behavior (or free volume theory) under free and constrained quenching conditions. As a result, tile residual stress remained as a tensile stress at the center and as a compressible stress near the surface for the free quenching cases. In contract the residual stress remained as a compressible stress at the center and as a tensile stress near the surface fur the constrained quenching cases. The residual birefringence remained as minus values at the center and as plus values near the surface for the free quenching cases. Interestingly the residual birefringence showed minus values in entire zone for the constrained quenching cases. In the prediction of birefringence only the case including free volume theory showed the correct result for the distribution of birefringence in thickness direction.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.34 no.1
• /
• pp.87-99
• /
• 1992

A mathematical model, UNSATR which predicts the seepage flow through the body of dike especially under the tidal fluctuation has been developed. This model has been revised from UNSAT2 model which was developed on the basis of the saturated-unsaturated theory by Neuman. UNSATR has been verified and applied to the hydraulic model in order to estimated the seepage quantity, the formation of free water surface etc. The results lead to the following conclusions : 1. Seepage rates between the mathematical model and hydraulic model experiment are very similar to each other both in constant and transient water level conditions. 2. The lapsed time to be steady state of the free water surface becomes late as the tidal levels are relatively low mainly due to the seepage flow from the unsaturated zone of the body of dike. 3. Under the transient state of water levels, owing to the flow from the unsaturated domain, streamlines crossing to the free water surface are found and time lag during a falling tide may allow the free water surface inside the body of dike to stand at a high level than the outside water level. 4. The utility and validity of UNSATR model are convinced when the analyses on seepage problems through the porous embankment of the soil structures on the conditions of the steady and unsteady states are carried out.