• Journal of Advanced Marine Engineering and Technology
• /
• v.30 no.1
• /
• pp.30-41
• /
• 2006

This paper shows mechanical Properties and behaviors of macrostructures for specimens welded by F.S.W according to welding conditions and tool dimensions with $6.35mm_t$ aluminum 7075-T651 alloy plate. It apparently results in defect-free weld zone in case transition speed was changed to 15mm/min 61mm/min and 124mm/min under conditions of tool rotation speed such as 800rpm. 1250rpm and 1600rpm respectively with tool's Pin diameter 40mm and 60mm. The optimum mechanical property, ultimate stress,${\sigma}_Y=470Mpa$ is obtained at the condition of 124mm/min of travel speed with 800rpm of tool rotation speed using full screw type pin. shoulder dia. $20{\phi}mm$ pin dia. $6{\phi}mm$ and pin length 6mm. The full-screw type and the half-screw type pin shows the similar behaviors of weldability. It is found that the size of nugget is depended on tool transition speed and tool dimension by macrostructures of the cross section of weld zone.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2005.06a
• /
• pp.348-358
• /
• 2005

This paper showed mechanical properties and behaviors of macrostructures for specimens welded by F.S.W according to welding conditions and tool with 6.35$mm_t$ aluminum 7075-T651alloy plate. It resulted in defect-free weld zone in case tool rotation speed was 800rpm, 1250rpm and 1600rpm respectively that transition speed was changed to 15mm/min, 61mm/min and 124mm/min with tool's pin diameter 4${\Phi}$mm and 6${\Phi}$mm. The optimum mechanical property, ultimate stress,${\sigma}_Y$=470Mpa was obtained at the condition of 124mm/min of travel speed with 800rpm of tool rotation speed using full screw type pin, shoulder dia. 20${\Phi}$mm, pin dia.6${\Phi}$mm and pin length 6mm. The full-screw type and the half-screw type pin showed the similar behaviors of weldability. It is found that the size of nugget was depended on tool transition speed and tool dimension by macrostructures of the cross section of weld zone.

• Proceedings of the Korea Port Economic Association Conference
• /
• 2003.07a
• /
• pp.69-88
• /
• 2003

The purpose of this study is to purpose the need of Masan free Trade Zone and the stratege successful implementation. Masan FTZ was established as a center of general free trade and global distribution by means the promotion of foreign investment in 1970s. To promote the development of MFTZ, in can be proposed a) successful technology innovation, b) reforming of related laws and regulations, c) the care of local government, 4) strengthening of marketing activities, e) deeping of comparative advantage of investment, f) encouraging of strategic industries.

• Journal of Advanced Marine Engineering and Technology
• /
• v.33 no.1
• /
• pp.104-111
• /
• 2009

This paper shows the behaviors of macro- and micro-structures and mechanical properties for specimen's welding region welded by FSW. according to welding conditions with 5mm thickness aluminum 5083O alloy plate. It apparently results in defect-free weld zone in case traverse speed was changed to 32 mm/min under conditions of anti-clockwise direction and tool rotation speed such as 800 and 1250 rpm with tool's pin diameter of 5 ${\Phi}mm$ and shoulder diameter of 20 ${\Phi}mm$, pin length of 4.5 mm and tilting angle of $2^{\circ}$. The ultimate stress of ${\sigma}_T=331$ MPa and the yield point of 147 MPa are obtained at the condition of the travel speed of 32 mm/min with the tool rotation speed of 1250 rpm. There is neither voids nor cracks on bended surface of $180^{\circ}$ after bending test. The improvement of toughness after impact test was found. The lower rotating and traverse speed became, the higher were yield point, maximum stress and elongation(%) with the stresses and the elongation(%) versus the traverse speed diagram. Vickers hardness for cross section of welding zone were also presented. The typical macro-structures such as dynamically recrystallized zone, thermo-mechanically affected zone and heat affected zone and the micro-structures of the transverse cross-section were also showed. However, the author found out that the region of 6mm far away from shoulder circumference was affected by friction heat comprehensively, that is, hardness softened and that part of micro-structures were re-solid-solution or recrystallized, the author also knew that there is no mechanically deformation on heat affected zone but there are the flow of plastic deformation of $45^{\circ}$ direction on thermo-mechanically affected zone and the segregation of Al-Mg on nugget. The solid solution wt(%) of parent material as compared against of friction stir welded zone was comprehensively changed.

• Journal of Fisheries and Marine Sciences Education
• /
• v.27 no.4
• /
• pp.1053-1062
• /
• 2015

This research assesses the implementation of the bilateral fisheries order of the China-Japan fisheries agreement. After establishment of UNCLOS, the China-Japanese fisheries agreement has played as a basis for the fisheries order in the East China Sea. The China-Japanese fisheries agreement intends that the fisheries industries in China and Japan can utilize the renewable natural resources in the East China Sea. As the EEZ of China overlaps with that of Japanese in the East China Sea, the two countries established the China-Japan Provisional Measure Zone and Middle Zone in the Sea. Even though the three coastal States (e.g. Korea, China, and Japan) in the East China Sea are involved in managing these zones, there has been little effort to coordinate each county's management. Additionally, the Taiwan-Japan fisheries agreement, which is for the area of N $27^{\circ}$, has made costal States to establish and implement united measures to conduct effective fisheries management. Regarding access to the joint fishing zone in EEZ, Chinese fisheries regulations have been enforced in the zone because the fishing capacity of China exceeds all of other countries, reducing the number of fishing licenses and catch quotas. It turned out that a nation that has authority over fisheries resources tends to establish specific conditions of fishing operations to maximize its national interest. In the China-Japan Provisional Measure Zone, Chinese and Japanese authorities have introduced united measures to manage fisheries resources. However, in the Middle Zone between China and Japan, there is no regulation on fishing; both countries' fishing vessels can have free access to the zone. Thus, it is recommended that one should introduce an international fisheries management regime for the Middle Zone. In this regard, Korea should play a leading role in establishing the international management regime because Korea has middle position in terms of geographical standpoint, the degree of dependence on commercial fishing, and its fishing capacity.

• Journal of Welding and Joining
• /
• v.33 no.5
• /
• pp.31-34
• /
• 2015

Microstructure and tensile property in the weld heat-affected zone (HAZ) of austenitic Fe-Mn-Al-C low density steels were investigated through transmission electron microscopy analysis and tensile tests. The HAZ samples were prepared using Gleeble simulation with high heat input welding condition of 300 kJ/cm, and the HAZ peak temperature of $1200^{\circ}C$ was determined from differential scanning calorimetry (DSC) test. The strain- stress responses of base steels showed that the addition of V improved the tensile and yield strength by grain refinement and precipitation strengthening. Tensile strength and elongation decreased in the weld HAZ as compared to the base steel, due to grain growth, while V-added steel had a higher HAZ strength as compared than V-free steel.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1994.10a
• /
• pp.279-284
• /
• 1994

Fracture mechanics does work for concrete, provided that one used a proper, nonlinear form of fracture mechanics in which a finite nonlinear zone at fracture front is being considered. The fracture process zone is a region ahead of a traction-free crack, in which two major mechanisms, microcracking and bridging, play important rules. The toughness due to bridging is dominant compared to the toughness induced by the microcracking, so that the bridging is the dominant mechanism governing the fracture process of concrete. In this paper the bridging zone, which is a part of extended macrocrck with stresses transmitted by aggregates in concrete, is modelled by a Dugdale-Barenblatt type model with lenear tension-softening curve for the analyses of crack growth in concrete Finite element technique is shown for inplementation of the model.

• Magazine of the Korea Concrete Institute
• /
• v.6 no.4
• /
• pp.92-101
• /
• 1994

A new analytical model is proposed to better understand the transfer bond performance in a prestressed pretensioned concrete beam. The transfer length is divided into an elastic and a plas tic zones in this model. The bond stress is assumed t.o increase proportionally with the slip t.o the lirnit of maximum bond stress within the elastic zone and remains at a constant maximum value wthin the plastic zone. Four main stress patterns: bond stress, slip, steel stress, and concrete stress distributions within the transfer length are obtained precisely. The total transfer length al\ulcornerd free-end slip obtained here give a close comparison to the test results by Cousins et al.

• Journal of Korea Port Economic Association
• /
• v.31 no.4
• /
• pp.107-120
• /
• 2015

This study analyzes Korea's Free Economic Zone (FEZ), by particularly focusing on Incheon and Busan-Jinhae zones, using the Analytic Hierarchy Process (AHP) method and a questionnaire survey analysis. The study compares important selection criteria and satisfaction of resident companies in Incheon and Busan-Jinhae FEZs. The findings are as follows. First, the AHP method results suggest that companies in both Incheon and Busan-Jinhae FEZs are affected by location, economic society, and policy. In subordinate determining factor for land, it is ordered by ease of gaining land, inexpensive rental fee in Incheon and by convenient access to close markets and inexpensive rental fee in Busan-Jinhae. Second, the questionnaire survey results suggest high adjacent market size and easy access in Incheon FEZ and sound logistics infrastructure in Busan-Jinhae FEZ. For this reason, Incheon has a high value of logistics infrastructure and potential market near metropolitan area and Busan-Jinhae, has a high value of transportation Infrastructure near industrial district. These findings will contribute to policy data for activating and promoting the Free Economic Zone.

• Journal of the Korean Ceramic Society
• /
• v.41 no.9
• /
• pp.647-652
• /
• 2004

In aqueous tape casting of alumina slurry systems, the relationships between the suspension compositions and the defects of the dried tapes were discussed. The suspensions compositions were controlled with the ratios of the solids, water and organics binder contents. The effects of the thickness of dried tape and kinds of binder system were also examined. In the defect free region, the apparent viscosity showed nearly same value due to the count balancing effect of solid and organic binder content on the apparent viscosity. When water content was constant, increasing solid led to decrease of organic binder content. The defect free region was narrowed with increasing of casting thickness. When linear type acrylic emulsion binders system (D1000 and D 1035) were used, defect free zone formed the belt type in the triangle of solid, water and organic binder content according to the line of constant water contents. However the defect free region was not found in the cross-link type emulsion binder system (D 1050).