• Korean Chemical Engineering Research
• /
• v.52 no.2
• /
• pp.205-208
• /
• 2014

Here, we reported mass-produced organic nanowires with uniform sizes based on poly(9,9-dioctylflurorene) (PFO), poly(9,9-dioctylfluorene-co-benzothiadiazole) (F8BT), (regioregular poly(3-hexylthiophene) (P3HT) which are well known as organic semiconductors for opto/electronics applications, using a melt-assisted wetting method with anodic alumina membrane. The conjugated polymer nanowires showed uniformed diameters (D=250~300 nm) and lengths ($L={\sim}30{\mu}m$) with defect free smooth surface regardless of a kinds of semiconductors. In addition, the nanowires were uniformly deposited onto glass substrates by spray-coating method. Under the UV light irradiation, PFO and F8BT nanowires showed blue and yellow emissions, respectively.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.49 no.6
• /
• pp.766-771
• /
• 2016

The pacific oyster Crassostrea gigas has a desirable taste and flavor that differs from those of other fish and shellfish. In order to develop a high value-added product from individually quick-frozen oyster extract (IQFOE), we prepared an oyster granular flavor seasoning (OGS) from IQFOE and characterized its qualities. The OGS was prepared by granular molding and fluidized bed drying with inosine monophosphate (IMP, 0.1%), yeast extract powder (1.4%), tangle extract powder (0.6%), monosodium glutamate (MSG, 5.0%), microcrystalline cellulose (0.6%), lactose (27.5%), salt (33.0%), spray-dried IQFOE (22.5%) as a powdered materials, and IQFOE ($Brix\;25^{\circ}$, 7.0%), soy sauce (0.4%) and water (1.7%) as a liquid materials. The moisture, crude protein, pH and salinity of the OGS were 3.4%, 12.5%, 6.50 and 32.0%, respectively. Especially, the OGS revealed very higher amino-N content (1,856.0 mg/100 g) than that (1,291.2-1,610.2 mg/100 g) of other commercial flavor seasonings. In taste-active compounds, free amino acid contents was 1,359.0 mg/100 g, and major ones were glutamic acid, taurine, hydroxyproline, glycine, lysine, phosphoserine, proline in order. And OGS showed good organoleptic qualities for taste, odor and general preference compared with commercial flavor seasonings on a local market.

• Journal of the Korean institute of surface engineering
• /
• v.48 no.6
• /
• pp.260-268
• /
• 2015

The thermal barrier coating (TBC) for inner wall of liquid-fuel rocket combustor consists of NiCrAlY as bonding layer and $ZrO_2$ as a top layer. In most case, the plasma spray coating is used for TBC process and this process has inherent possibility of cracking due to large difference in thermal expansion coefficients among bonding layer, top layer and metal substrate. In this paper, we suggest crack-free TBC process by using a precise electrodeposition technique. Electrodeposited Ni-P/Cr double layer has similar thermal expansion coefficient to the Cu alloy substrate resulting in superior thermal barrier performance and high temperature oxidation resistance. We studied the effects of phosphorous concentrations (2.12 wt%, 6.97 wt%, and 10.53 wt%) on the annealing behavior ($750^{\circ}C$) of Ni-P samples and Cr double layered electrodeposits. Annealing temperature was simulated by combustion test condition. Also, we conducted SEM/EDS and XRD analysis for Ni-P/Cr samples. The results showed that the band layers between Ni-P and Cr are Ni and Cr, and has no formed with heat treatment. These band layers were solid solution of Cr and Ni which is formed by interdiffusion of both alloy elements. In addition, the P was not found in it. The thickness of band layer was increased with increasing annealing time. We expected that the band layer can improve the adhesion between Cr and Ni-P.

• Food Science and Biotechnology
• /
• v.18 no.3
• /
• pp.724-731
• /
• 2009

Anthocyanins are considered one of the main color determinants in aged red wine. The anthocyanins in aged red wine made from 'Cabernet Gernischet' (Vitis vinifera L. cv.) grape were investigated by high performance liquid chromatography- electronic spray ionization- mass spectrometry (HPLC-ESI-MS) and their color presented in aqueous solution were evaluated using partial least square regression (PLS). The results showed that there were 37 anthocyanins identified in this wine, including 22 pyranoanthocyanins. The analysis of PLS indicated that different anthocyanins showed distinct color values: malvidin 3-O-(6-O-acetyl)-glucoside-4-vinylguaiacol (Mv3-acet-glu-vg) presented the highest color values, while malvidin 3-O-glucoside (Mv3-glu) showed least. Among the free non-acylated anthocyanins, peonidin 3-O-oglucoside (Pn3-glu) showed the highest color values; the coumarylated anthocyanins presented higher color values than their corresponding acetylated anthocyanins and parent anthocyanins; pyranoanthocyanins presented also higher color values than their original anthocyanins; the color of anthocyanins depended on their structure. This work will be helpful to reveal evolution in aged red wine.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.38 no.12
• /
• pp.1027-1034
• /
• 2014

The shear stress on a surface due to the thin film fluid flow is an important issue. In case of a rotating disk, the fluid is delivered to the edge of the disk by centrifugal force, which acts as a body force on the fluid. Wear of a surface is affected by the shear stress acting on the surface and curvature. In this study, we utilize computational fluid dynamics software to model the ratio of curvature and local shear stress on solid surfaces. The key goal of the study is to determine an optimized curvature for the thin film fluid flow on a solid surface in order to minimize the local shear stress affecting the wear of this surface. Our results on the effects of curvature will be utilized for the design of devices that utilize thin film fluid flow on a solid surface, such as rotating-disk spray systems and thin film coating.

• Design & Manufacturing
• /
• v.13 no.3
• /
• pp.12-18
• /
• 2019

Fluid jet polishing is a method of jetting a fluid to polish a concave or free-form surface. However, the fluid jet method is difficult to form a stable polishing spot because of the lack of concentration. In order to solve this problem, MR fluid jet polishing system using an abrasive mixed with an MR fluid whose viscosity changes according to the intensity of a magnetic field is under study. MR fluid jet polishing is not easy to formulate for precise optimal conditions and material removal due to numerous fluid compositions and process conditions. Therefore, in this paper, quantitative data on the factors that have significant influence on the machining conditions are presented using various simulations and the correlation studies are conducted. In order to verify applicability of the fabricated MR fluid jet polishing system by nozzle diameter, the flow pattern and velocity distribution of MR fluid and polishing slurry of MR fluid jet polishing were analyzed by flow analysis and shear stress due to magnetic field changes was analyzed. The MR fluid of the MR fluid jet polishing and the flow pattern and velocity distribution of the polishing slurry were analyzed according to the nozzle diameter and the effects of nozzle diameter on the polishing effect were discussed. The analysis showed that the maximum shear stress was 0.45 mm at the diameter of 0.5 mm, 0.73 mm at 1.0 mm, and 1.24 mm at 1.5 mm. The cross-sectional shape is symmetrical and smooth W-shape is generated, which is consistent with typical fluid spray polishing result. Therefore, it was confirmed that the high-quality surface polishing process can be stably performed using the developed system.

• Animal Bioscience
• /
• v.35 no.9
• /
• pp.1418-1425
• /
• 2022

Objective: An experiment was conducted to determine the standardized ileal digestibility (SID) of amino acids (AA) in fish meal (FM) and blood-derived protein sources including spray-dried porcine plasma (SDPP), porcine red blood cells (PRBC), and blood meal (BM) fed to growing pigs. Methods: Ten barrows (mean initial body weight of 22.1±1.54 kg) surgically fitted with T-cannulas at the distal ileum were allotted to a duplicated 5×4 incomplete Latin square design with 5 experimental diets and 4 periods. Four experimental diets were prepared to contain FM, SDPP, PRBC, or BM as the sole source of nitrogen. A nitrogen-free diet was prepared and included to estimate the basal ileal endogenous losses of AA. For the 7-day experimental period, pigs were fed for 5 days as adaptation, and ileal digesta samples were collected for 9 hours on days 6 and 7. Results: The SID of crude protein in BM (48.0%) was less (p<0.05) than in FM, SDPP, and PRBC (83.4%, 83.9%, and 87.3%, respectively). Pigs fed the diet containing BM had less (p<0.05) SID of AA, except isoleucine and proline, than those fed the diet containing FM, SDPP, or PRBC. Among FM, SDPP, and PRBC, there was no difference in the SID of crude protein and all AA, except isoleucine. The SID of isoleucine in PRBC and BM (62.7% and 48.3%, respectively) was less (p<0.05) than in FM and SDPP (88.0% and 84.9%, respectively). The SID of lysine in FM, SDPP, PRBC, and BM was 85.4%, 84.9%, 89.7%, and 51.9%, respectively. Conclusion: The SID of most AA was not different among FM, SDPP, and PRBC, but BM had lower SID of most AA than FM, SDPP, and PRBC.

• Journal of Oral Medicine and Pain
• /
• v.30 no.4
• /
• pp.457-464
• /
• 2005

The purpose of our study was to investigate whether the intrapulpal temperature during cavity preparation of enamel or dentin with Er:YAG laser still remained in range of safety for dental pulp protection when combined with appropriate water flow rate. The effect of different pulse repetition rates at the same pulse energy during ablation was evaluated as well. Caries-free, restoration-free extracted human molar teeth were prepared for the specimen and divided two experimental groups of enamel and dentin. Each group comprised 5 specimens and each of tooth specimens were embedded into a resin block each and measuring probe was placed on the irradiated pulpal walls. For experiments of dentin ablation, enamel layers were prepared to produce dentin specimen with a same dentin thickness of 2 mm. A pulse energy of Er:YAG laser was set to 300 mJ and three different pulse repetition rates of 20 Hz, 15 Hz and 10 Hz were employed. Laser beam was delivered with 3 seconds and less per application over enamel and dentin surfaces constant sized by $3\;mm{\times}2\;mm$ and water spray added during irradiation was a rate of 1.6 ml/min. Temperature change induced by Er:YAG laser irradiation was monitored and recorded While enamel was ablated, there was no significant difference of temperature related to pulse repetition rates(p=0.358) and temperature change at any pulse repetition rate was negligible. Significant statistical difference in temperature changes during cavity preparation in dentin existed among three different pulse groups(p=0.001). While temperature rise was noticeable when the dentinal wall was perforated, actual change of temperature due to Er:YAG laser irradiation was not enough to compromise safety of dental pulp when irradiation was conjugated with appropriate water spray. Conclusively, it can be said that cavity preparation on enamel or dentin with an Er:YAG laser is performed safely without pulp damage if appropriate volume of water is sprayed properly over the irradiated site.

• Korean Journal of Agricultural Science
• /
• v.19 no.2
• /
• pp.161-169
• /
• 1992

Studies were conducted to examine the effects of single or combined treatment of uniconazole [(E)-1-(4-chlorophenyl)-4, 4-dimethyl 2(1, 2,-4-triazol-1-yl)-1-penten-3-ol)] and silver thiosulfate (STS) on reducing ozone injury to snap beans (Phaseolus vulgaris L. 'Strike'). Two weeks after seeding, plants were given a soil drench of uniconazole(XE-1019) solution at concentrations of 0.001, 0.005 and 0.025 mg/pot, and then two days prior to ozone fumigation, 0.3 and 0.6 mM STS containing 0.01% Tween-20 were also sprayed. Uniconazole was effective in providing protection against ozone injury through increase activities of free radical scavengers such as superoxide dismutase (SOD) and peroxidase (POD) as well as the increase of chlorophyll content and stomatal resistance resulted from plant growth retardation. The phytoprotective effects of STS seemed to be related to its properly of blocking the ethylene action and increasing activities of SOD and POD. Even at low concentrations, a combined treatment with uniconazole drench, STS spray significantly reduced ozone injury compared to single application.

• Food Science of Animal Resources
• /
• v.30 no.1
• /
• pp.102-109
• /
• 2010

Imitated cheese was prepared from whole milk powder and fermented milk and the moisture content, general components, noncasein nitrogen, nonprotein nitrogen and free amino acids were analyzed to determine the optimal ripening conditions needed to produce imitated cheese that was similar to natural cheese. The moisture content of the imitated cheese was 40.27% one day after being produced. The cheese was ripened using two different methods; at $12^{\circ}C$ with vacuum sealing and at $12^{\circ}C$ and 95% RH with a spray of Penicillium camemberti. The lactose content decreased rapidly from 24.64 to 5.43% at the $4^{th}$ wk of ripening when it was ripened with Penicillium camemberti. The degradation of protein by mold ripening in the imitated cheese was more rapid than that of vacuum sealing. The flavor and body texture were optimal at the $4^{th}$ wk ripening. The noncasein nitrogen and nonprotein nitrogen content increased from 28.10 to 54.05, and from 6.58 to 23.06 mg/mL, respectively, when ripened with P. camemberti. When the cheese was ripened at $12^{\circ}C$, 95% R.H with P. camemberti after 4 wks, all free amino acids increased significantly except asparagines. The total free amino acid and bitter amino acid concentrations increased from 8.40 to 34.87, and from 1.53 to 10.02 nmol/mg, respectively. When the imitated cheese was prepared, the protein degradation and flavor of the cheese was better when ripened with P. camemberti.