• Korean Journal of Environmental Agriculture
• /
• v.15 no.4
• /
• pp.479-487
• /
• 1996

This study was conducted to investigate the phytoprotective effects of uniconazole on $SO_2$ injury in P. occidentalis. The detoxification role of free radical scavengers such as superoxide dismutase (SOD) and peroxidase (POD) was also examined under the conditions of combined treatment with uniconazole and diethyldithiocarbamate (DDTC). Uniconazole drenching significantly reduced the occurrence of visible injuries. Though shoot length, leaf area, and T/R rate were greatly decreased by uniconazole application, the tolerance to $SO_2$ was enhanced through increased chlorophyll content and activities of SOD and POD. Spray of DDTC decreased the activity of SOD and POD resulting in the increase of visible injury. Plant tolerance to $SO_2$ induced by uniconazole application was reduced by the additional application of DDTC. These results indicate that plant tolerance to $SO_2$ induced by uniconazole is associated with the reduction of vegetative growth as well as the increase in free radical scavengers such as SOD and POD.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.10 no.5
• /
• pp.131-136
• /
• 2011

Many researchers are recently studying about Electroactive polymer(EAP). But it has a physical limitation, because of property of material. Carbon nanotube(CNT) is known as the promising material which has excellent electro-mechanical characteristics and is mostly defect-free. It is expected that a successful synthesis of CNT and Nafion known as a primary material for IPMC would make a great improvement on its electro-mechanic feature. This study focuses on the method of synthesis of CNT with Nafion which improves electro-mechanical characteristic. To come up with mechanical dispersion with Nafion and Isopropyl Alcohol(IPA), we dispersed Single-walled carbon nanotubes(SWCNTs). For a uniformly layer of CNT, we used a spray gun on a hot plate by a simplified method. We fabricated a disperse SWCNT/Nafion composite uniformly. Through the use of the E-beam evaporator to form an uniform electrode layer, we consummated the IPMC actuator. This result shows improving 1.5 times mechanical properties about driving force in IPMC.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.2
• /
• pp.193-201
• /
• 2011

Clamp type transferring mechanism for package substrate's wet processes was newly developed instead of conventional roller type transferring mechanism. Clamp type transferring mechanism has the advantages of reducing the panel deflection and of minimizing the contact problem between the panel and the transferring mechanism. Individual clamp of the mechanism has two distinct mechanical functions which are perfectly fixing a panel during the transferring and generating adequate tension for the panel. To determine the mechanical parameters of the clamp, panel deflection simulation was conducted and the result was verified by the panel deflection measurement. Also, fixing angle of a clamp could be determined by the free body force analysis of individual clamp. Finally clamp type transferring mechanism was actually manufactured and the transferring performance was verified during the water spraying condition of the package substrate's wet processes.

• Journal of Ocean Engineering and Technology
• /
• v.23 no.1
• /
• pp.67-73
• /
• 2009

This study presents the results of a slamming experiment using a pneumatic cylinder. The employment of the pneumatic cylinder showed a relatively good repeatability when the results were compared with those of other slamming devices. The experiment was done for various incident angles. An air pocket was believed to cause a reduction in the magnitude of the impact pressure with an incident angle of $0^{\circ}$ for the water entry. A high speed camera was used in an attempt to locate the time of the contact between the bottom of the specimen and the free surface. It seemed that the maximum pressure occurred before the water contacted the bottom of the specimen.

• Journal of ILASS-Korea
• /
• v.11 no.3
• /
• pp.176-189
• /
• 2006

In the present study, capability of improving the liquid atomization of a high-speed liquid jet by using wall impingement is explored, and its application to a jet engine atomize. is demonstrated. Water is injected from a thin nozzle. The liquid jet impinges on a wall positioned close to the nozzle exit, forming a liquid film. The liquid film velocity and the SMD were measured with PDA and LDSA, respectively. It was shown that the SMD of the droplets was determined by the liquid film velocity and impingement angle, regardless of the injection pressure or impingement wall diameter. When the liquid film velocity was smaller than 300m/s, a smaller SMD was obtained, compared with a simple free jet. This wall impingement technique was applied to a conventional air-blasting nozzle for jet engines. A real-size air-blasting burner was installed in a test rig in which three thin holes were made to accommodate liquid injection toward the intermediate ring, as an impingement wall. The air velocity was varied from 41 to 92m/s, and the liquid injection pressure was varied from 0.5 to 7.5 MPa. Combining wall impinging pressure atomization with gas-blasting produces remarkable improvement in atomization, which is contributed by the droplets produced in the pressure atomization mode. Comparison with the previous formulation for conventional gas-blasting atomization is also made, and the effectiveness of utilizing pressure atomization with wall impingement is shown.

• Textile Coloration and Finishing
• /
• v.20 no.1
• /
• pp.1-7
• /
• 2008

The study has attempted to introduce a new coating than the conventional standardized method of spray, padding and roll coating. The study has focused on finding condition for separating water and organic layer in marble bath and surface effects according to kind of raw hide. It was found that dyestuff-free was to be used in water layer and the input amount of initial insoluble pigment to be added in marble bath should be adjusted following the change of surface area of the marble bath in order to get efficient marble effect while preventing coagulation of water and organic layers. Eventually, amorphous high value-added leather could be obtained treated in process other than the conventional standardized method. Even raw hides of low grades($C{\sim}E$ grades) could be processed into amorphous marble effect that could conceal or shield surface scratches by the colorant, which eventually eliminated necessity of using excessive amount of chemicals in the coating process leading to achieving high quality marble leather of natural look.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.50 no.3
• /
• pp.191-196
• /
• 2005

Fusarium head blight (FHB) is a severe disease problem that affects the quality and yield of barley grain. The evaluation of FHB resistance is difficult because environmental conditions greatly influence FHB infection and development. The objectives of this study were to: 1) establish an efficient screening method for selecting resistant barley to FHB, 2) compare FHB severity between the cut-spike method and pot-plant method for development of mass screening, and 3) estimate FHB resistance for barley germplasms. Barley cultivars and lines were evaluated for reaction to FHB in controlled-greenhouse condition. Spikes were spray-inoculated with a suspension $(5.0\times10^5\;macroconidia\;mL^{-1})$ of Fusarium graminearum SCK-O4 strain, and then kept in a greenhouse at $18-25^{\circ}C$ with $80-100\%$ relative humidity. Inoculation were employed at 3 different heading growth stages (heading date, three days after heading, and five days after heading). The inoculation was performed in 2 consecutive days in order to avoid escapes. The inoculated plants were maintained in the greenhouse at 4 different free moisture periods (1, 3, 5, and 7 days). The percentage of FHB severity was scored from 0 to 9 according to the rate of infected kernels per spike, and three spikes were evaluated per replication with 3 replicates. There were significant differences of FHB severity depending on the different free moisture periods, but not by the inoculation at different heading stages. The optimum evaluation point of FHB severity in the greenhouse condition was on the 7th day under free moisture condition after inoculation at the heading date. Infection level in cut-spike method highly correlated with that in pot-plant method. This suggested that cut-spike method is useful in evaluating of FHB resistance in barley. Six cultivars, such as Jinkwang, Buheung, Atahualpha 92, Chevron-b, Gobernadora-d, and MNBrite-c, were selected as resistant varieties to FHB. Correlation coefficient for the FHB severity evaluated by the pot-plant method between two seasons was 0.794, indicating the stability and accuracy of the screening method.

• Korean Journal of Food Science and Technology
• /
• v.28 no.4
• /
• pp.696-701
• /
• 1996

For effective utilization of skipjack (Katsuwonus pelamis) cooking juice (SCJ), the SCJ was hydrolyzed with 0.5% neutrase at $50^{\circ}C$ for 1 hr, and the degree of hydrolysis was estimated to be 66.0% at this reaction condition. The hydrolysate was treated with charcoal and filtered under reduced pressure. The extract powder was prepared from the filtrate in a spray-dryer. The major free amino acids of the extract Powder were taurine (526.3 mg/100 g), glutamic acid (375.8 mg/100 g), phenylalanine (315.9 mg/100 g), and alanine (283.6 mg/100 g), and their content accounted for 55.4% of the total free amino acids (2,711.5 mg/100 g). Among the nucleotides and their related compounds, inosine was the major component with 76.29 mole/g. The content of betaine-N, total ceatinine-N, TMAO-N, and TMA-N were 72.2, 51.2, 10.3, and 6.9 mg/100 g, respectively. From the omission test, it was concluded that the major taste compounds of the extract powder were believed to be free amino acids such as glutamic acid and alanine. Organic acids and nucleotides and their related compounds acted an auxiliary role in the taste of the extract powder.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.20 no.6
• /
• pp.520-528
• /
• 1987

Quality stability of roasted lavers during heat treatment and storage was investigated measuring the changes in pigments including chlorophyll a, carotenoids and biliproteins, fatty acids and free amino acids as the major quality factors. In roasting of fried lavers, carotenoids were found to lie more stable than chlorophyll a, and biliproteins were most heat labile. The overall heat stability of the pigments depended upon heating time and temperature. Chlorophyll a and carotenoids were retained more than $90\%$ in the casts of roasting for 90 min. at $60^{\circ}C;\;60min.\;at\;80^{\circ}C;\;10\;min.\;at\;100^{\circ}C;\;or\;5min.\;at\;150^{\circ}C$ while biliproteins remained about $70\%$. The lipids of dried lavers including polyunsaturated fatty acids appeared rather heat stable when compared to the stability of pigments under the same conditions of roasting. Spray of sesame oil or seasoning solutions on the surface of lavers after roasting seemed desirable for stabilizing pigments and free amino acids during storage particularly at low water activity. And that was also benefit for the protection of polyenoic fatty acids from rapid progress of oxidation during storage. Free amino acids were reduced fast during roasting, especially most of threonine and glycine while glutamic acid was rapidly lost during the storage.

• Korean Journal of Organic Agriculture
• /
• v.8 no.1
• /
• pp.89-99
• /
• 1999

To do mass multiplication of plug seedlings in potatoes, apical stem cuttings originated from virus-free microtubers were cut to one-two internodes and transplanted into the plug-tray. After 10days, we applied Chitosan and Wood Extraction on rooting and tuber formation of plug seedlings. To improve field adaptability of plug seedlings, rooted cuttings with a height of 20cm after 20days of cutting were transplanted ito the fields, We applied 500~2000ppm Chitosan on growth characteristics and tuber formation of that. The above and underground growths, such as plant height and number of leaves were significantly more vigorous after treatment with 500~1,000ppm Chitosan and 2,000ppm Wood Extraction, the spray treatment was carried out five times at intervals of four days after ten days of transplanting. T-N, K, P, Mg and Na, were higher as the concentrations of chitosan and Wood Extraction were higher. The growth and tuber yield in plug seedlings planting plot and seed potatoes planting plot were effectively highter as foliar application of Chitosan(500~2,000ppm) was done after planting the plot. T-N content in leaves and tuber was higher as the concentration of Chitosan was high. A similar tendency was shown in K, P and Mg. In the small tuber(under 30g), the number of tubers and tuber yield were relatively increased in the seed potatoes planting plot, but the large tubers(over 80g) yield was higher in the plug seedlings planting plot, and in order to increase tuber yield in plug seedlings it was necessary to add plant density to the field.