• 폴리머
• /
• 제24권4호
• /
• pp.499-504
• /
• 2000

고강도 PAN계 탄소섬유를 양극산화하여 섬유의 표면 관능기와 표면 자유에너지, 그리고 최종 복합재료의 기계적 특성 향상에 미치는 영향을 고찰하였다. FT-IR과 XPS 측정 결과, 양극산화에 의해 형성된 섬유 표면의 산소 관능기는 섬유의 표면 에너지와 복합재료의 층간 전단강도 (ILSS)에 큰 영향을 주는 것으로 나타났다. 그리고 젖음액의 wicking rate에 근거한 접촉각 측정에서 탄소섬유의 양극산화는 표면 자유에너지의 극성 요소를 크게 증가시키며, 이것은 표면 에너지 관점에서 살펴볼 때 좋은 젖음성이 최종 복합재료의 섬유와 에폭시 수지 매트릭스사이의 계면결합력 향상에 중요한 역할을 하는 것으로 나타났다. 또한 본 연구에서는 섬유 표면의 $O_{1s}$ $C_{11}$ ratio 또는 극성 요소와 복합재료의 ILSS사이에서 직선적인 상관관계를 나타낼 수 있었다.다.

• 한국기계가공학회지
• /
• 제20권3호
• /
• pp.60-67
• /
• 2021

Recently, research attention has been focused on vibration-free vehicles to transport small numbers of expensive electronic products. Vibration-free vehicles can be used to transport expensive test equipment or semiconductors, mainly produced in the domestic IT industry, and can serve as a readily available transportation system for short driving distances due to the increased efficiency on narrow national highways. This study was aimed at developing a Z-Spring to minimize the vibration by installing an air spring instead of the plate spring applied to conventional freight cars and to prevent the damage of the loaded cargo from the shock occurring during movement. The mechanical properties (elastic modulus, tensile strength, and shear strength) of carbon fiber (CF) and glass fiber (GF) prepreg were derived, and ANSYS ACP PrepPost analyses were performed. It was observed that in the case of hybrid composites, the total deformation and equivalent stress are higher than that of CFRP; however, in terms of the unit cost, the hybrid Z-Spring is more inexpensive and durable compared to the GF.

• 자원ㆍ환경경제연구
• /
• 제21권4호
• /
• pp.809-850
• /
• 2012

본 연구는 개별 국가 혹은 지역 단위 배출권 거래제도의 국제적 연계 가능성에 대비하기 위해 한 중 일 3국간의 배출권 거래제도 연계 시 예상되는 경제 환경적 영향을 분석하기 위해 수행되었다. 이를 위해 연산가능 일반균형모형을 통해 3국간 배출권 거래제 도입의 경제 환경적 영향을 분석하였다. 분석결과 한 중 일 3국간 탄소시장의 연계는 국가별로 다양한 측면에서 복잡한 영향을 미치게 됨을 확인할 수 있다. 한 중 일 배출권 거래제 연계 시행은 3국 전체의 실질 GDP를 증가시키는 긍정적 효과가 있음에도 불구하고 연계로 인한 이익의 국가간 분배가 불균형적임은 물론 실질 소비나 고용 등의 측면에서는 탄소시장 연계가 3국 전체적으로도 오히려 부정적인 영향을 초래할 수 있다는 점에서 반드시 긍정적인 효과만을 담보하는 것은 아니다. 특히 배출권 매입국인 한국과 일본의 소득 소비 고용 감소 및 에너지 의존도 증가, 배출권 매출국인 중국의 생산 감소 및 해외 이전 가능성은 3국간 탄소시장의 연계의 장애요인으로 작용할 수 있다. 3국간 탄소시장 연계를 통한 긍정적 효과를 최대한 유지하면서 예상되는 부정적 효과를 최소화하기 위해서는 배출권 수입 관세나 수입배출권 할인과 같은 보완적 정책수단의 개발 적용이 필요하다.

• 동아시아식생활학회지
• /
• 제20권3호
• /
• pp.396-401
• /
• 2010

본 연구는 농산부산물인 왕겨, 보리외피, 대두외피에 적당한 열처리 및 활성화 처리를 하여 다양한 크기의 다공성 표면을 가진 회화재 및 활성탄 형태의 흡착제를 제조하여 식용유지의 불순물인 유리지방산과 색소 성분인 lutein에 대한 흡착 효과를 살펴보았다. 회화재 형태의 흡착제인 왕겨 회화재(RHA), 보리외피 회화재(BHA), 대두외피 회화재(SHA)는 처리 농도가 증가할수록 유리지방산 흡착 효과도 증가하여 대두 유의 산가가 감소하였는데 SHA와 BHA의 유리지방산 흡착효과가 컸고 RHA와 실리카의 효과는 작았다. SHA와 BHA는 5% 처리시 탈검 대두유의 산가를 82~86% 감소시킨데 비해 RHA는 29%, 실리카는 19% 감소시켰다. 회화재 형태의 흡착제 처리와 달리 활성탄 형태의 흡착제인 왕겨 활성탄(RHC), 보리외피 활성탄(BHC), 대두외피 활성탄(SHC)은 처리 농도를 증가시켜도 유리지방산 흡착 효과가 증가하지 않았다. RHC는 5% 처리시 탈검 대두유의 산가를 16%, BHC와 SHC는 8~10% 감소시켰으나, 상업용 활성탄은 거의 영향을 주지 않았다. 흡착제 종류별 lutein 제거 효과에서는 회화재 형태의 흡착제의 경우 7~8%의 미미한 감소를 보인 반면, 활성탄 형태의 흡착제의 경우 5% 처리 농도에서 RHC는 56%로 가장 큰 흡착 효과를 보였고, BHC는 41%, SHC는 52%, 상업용 활성탄은 49%의 lutein 함량 감소를 나타냈다. 따라서 lutein에 대한 흡착 효과는 회화재 형태의 흡착제보다 활성탄 형태의 흡착제가 훨씬 뛰어남을 알 수 있었다. 회화재 형태의 흡착제들은 비표면적과 전체 세공 부피는 작으나 세공의 크기가 큰 중간 세공이나 거대 세공으로 주로 이루어져 있고, 이런 특성이 유지 중에 불순물로 함유되어 있는 유리지방산 흡착과 관련이 있는 것으로 보인다. 반면에 색소 성분인 lutein은 회화재 형태의 흡착제 처리에서는 거의 감소 효과가 없고 활성탄 형태의 흡착제에서 감소 효과를 보인 것으로 보아 미세 세공에 흡착되는 특성이 있는 것으로 보인다. 따라서 흡착제를 이용하여 식용유지를 정제할 때는 회화재 형태와 활성탄 형태의 흡착제들을 혼합하여 사용하면 유리지방산과 lutein을 동시에 제거할 수 있을 것이다.

• 상하수도학회지
• /
• 제34권2호
• /
• pp.93-104
• /
• 2020

As water resources are limited and legal regulations are strengthened, there is a growing need to reuse residuals in WTP(Water Treatment Plant). In this study, membrane filtration system was constructed and its operation method was studied for water quality stabilization and reuse of WTP residuals. The operation parameters were stable for 1 year and 6 months. Membrane fouling was identified as particulate pollution (activated carbon) and inorganic pollution (manganese). The membrane system was operated steadily with raw water of high concentration SS(Suspended solid) containing activated carbon because membrane fouling was reduced by the effect of End-Free type. In the case of inorganic contamination, dissolved manganese eluted by chemicals and acted as a membrane fouling source, and the operating conditions for minimizing membrane fouling. were confirmed by newly developing application methods and types of cleaning chemicals. Based on the results, design parameters for reducing manganese membrane fouling were derived.

• Smart Structures and Systems
• /
• 제4권4호
• /
• pp.391-406
• /
• 2008

This study attempts to develop a real-time debonding monitoring system for carbon fiber-reinforced polymer (CFRP) strengthened structures by continuously inspecting the bonding condition between the CFRP layer and the host structure. The uniqueness of this study is in developing a new concept and theoretical framework of nondestructive testing (NDT), in which debonding is detected without relying on previously-obtained baseline data. The proposed reference-free damage diagnosis is achieved based on the concept of time reversal acoustics (TRA). In TRA, an input signal at an excitation point can be reconstructed if the response signal measured at another point is reemitted to the original excitation point after being reversed in the time domain. Examining the deviation of the reconstructed signal from the known initial input signal allows instantaneous identification of damage without requiring a baseline signal representing the undamaged state for comparison. The concept of TRA has been extended to guided wave propagations within the CFRP-strengthened reinforced concrete (RC) beams to improve the detectibility of local debonding. Monotonic and fatigue load tests of large-scale CFRP-strengthened RC beams are conducted to demonstrate the potential of the proposed reference-free debonding monitoring system. Comparisons with an electro-mechanical impedance method and an inferred imaging technique are provided as well.

• 한국물환경학회지
• /
• 제24권1호
• /
• pp.118-122
• /
• 2008

Degradations of phenol and chlorinated compounds mixtures were studied with ultrasound of 20 kHz and 0.57, 1.14 W/mL. In presence of carbon tetrachloride (CT), degradation rate of phenol is faster than chloroform (CF), dichloromethane (DCM) and phenol solution. It is due to that CT generates of free chlorine (HOCl and $OCl^-$) from the sonochemical degradation and plays a role of hydrogen atom scavenger. CF and DCM are react with free chlorine, so amount of free chlorine is smaller than CT solution. The degradation rates of chlorinated compounds decreased with co-presence of phenol in the solution due to the distribution ultrasonic energy to both compounds. The measured chloride ion was lower than the theoretical concentration assuming complete degradation. This means not all the contaminants destructed went through complete degradation.

• Transactions on Electrical and Electronic Materials
• /
• 제3권3호
• /
• pp.34-38
• /
• 2002

In this paper, efficiency estimation of toxicity fee fire resistance cable experiments was measured smoke density of toxicity free fire resistance polyolefin insulation material and electric field dependence of tree shape in low density polyethylene (LDPE). One of the most serious causes of failure in high-voltage cables, can be an electrical discharge across an internal gab or void in the insulating material. Treeing due to partial discharge is one of the main causes of breakdown in the insulating materials and reduction of the insulation life. Therefore the necessity for establishing a method to diagnose the aging of insulation materials and to predict the breakdown of insulation and research of the fire resistance character has become important. First, we have studied on electric field dependence of tree shape in LDPE about treeing phenomena occurring on the high electrical field. Second, the measurement method is the attenuation quantity of irradiation by smoke accumulating with in a closed chamber due to non-flaming heat decomposition and flaming combustion. A main cause of fire-growth and generating toxic gas when, it bums, should be dealt with great care in life. safety design. The fire gases were occurred carbon monoxide and decomposition than in polyolefin due to incomplete combustion of PVC, which has high content of carbon in chemical compound.

• Structural Engineering and Mechanics
• /
• 제70권3호
• /
• pp.351-365
• /
• 2019

In this paper, free vibration of Cooper-Naghdi micro sandwich cylindrical shell with saturated porous core and reinforced carbon nanotube (CNT) piezoelectric composite face sheets is investigated by using first order shear deformation theory (FSDT) and modified couple stress theory (MCST). The sandwich shell is subjected to magneto-thermo-mechanical loadings with temperature dependent material properties. Energy method and Hamilton's principle are used for deriving of the motion equations. The equations are solved by Navier's method. The results are compared with the obtained results by the other literatures. The effects of various parameters such as saturated porous distribution, geometry parameters, volume fraction and temperature change on the natural frequency of the micro-sandwich cylindrical shell are addressed. The obtained results reveal that the natural frequency of the micro sandwich cylindrical shell increases with increasing of the radius to thickness ratio, Skempton coefficient, the porosity of the core, and decreasing of the length to radius ratio and temperature change.

• 한국생산제조학회지
• /
• 제8권4호
• /
• pp.45-51
• /
• 1999

In this study to assess chip breaking characteristics of cold-drawn free machining steels a newly developed non-dimensional parameter chip breaking index CB has been adopted. And for comparison with free machining steels chip breaking characteristics of conventional carbon steels were investigated. Properly controlled chips were produced with the CB value of 0.05-0.2 regardless of steel types. In case of cold-drawn free machining steels however cycle times of chip breaking are relatively shorter than those of conventional steels. And properly controlled chips were obtained from wider range of feed rate.