• 소음진동
• /
• 제6권6호
• /
• pp.801-818
• /
• 1996

Free vibration analyses of circular cylindrical shells attached with plate structures for the symmetric boundary condition such as simply-simply supported shells by receptance method are found in literatures. However analyses of those shells with unsymmetric boundary condition as clamped free boundary are hardly found. Here frequency equation of the clamped free circular cylindrical shell with end plate is derived using receptance method and natural frequencies of the combined system were calculated. The frequencies and mode shapes obtained from present method are compared with those of ANSYS to show the validity of the method. Natural frequencies and mode component ratios of clamped-free cylindrical shell are obtained by employing Rayleigh-Ritz method on energy equations, and they are used in receptance calculation. Results show good agreement with those of ANSYS analyses.

• 한국분무공학회지
• /
• 제10권4호
• /
• pp.26-31
• /
• 2005

Today, the research to examine a fact that interaction between the air and the fluid free surface affects the steady state flow and air. We proved the interaction between vortex pairs and free surface on each condition that is created by the end of delta wings. Another purpose of this study is to investigate the effect of surface active material which call change the surface tension and we must consider when we refer to turbulent flow on surface tension. Therefore, this research examined the growth process of vortex pairs on condition of clean, contaminated free surface and wall after we made vortex pairs through counter rotating flaps. The results of this study suggest that vortex pairs in clean free surface rise safely but the vortex pairs in contaminated free surface and rigid, no slip is made secondary vortex or rebounding. However the secondary vortex in rigid, no slip is stronger than before. and we can find the vortex shape which roll up more completely. However, these will disappear by the effect of wall.

• Applied Biological Chemistry
• /
• 제39권3호
• /
• pp.200-205
• /
• 1996

본 실험에서는 수박 (Citrullus vulgaris L.)과 멜론 (Cucumis melo val. reticulatus Naud.)에 있어서 서로 다른 부위에 함유되어 있는 주요 유리당 (glucose, fructose, sucrose, maltose)을 분리, 정량하기 위해서 HPLC (High Performance Liquid Chromatography)를 이용하였다. 수박과 멜론에 있어서 주로 존재하는 유리당들은 fructose, glucose, sucrose 등이며, 이 유리당들의 함량은 부위별로 다양한 변이를 보였다. 부위별 유리당의 총함량은 stem end 부위에서의 함량보다 stylar end와 side 부위에서의 함량이 더 높았다. 이러한 결과는 수박과 멜론에서 같은 양상이었다. 수박의 경우 전체 유리당 함량은 과피 부위에서 중심 부위로 갈수록 약간씩 증가하는 경향을 보였고, 멜론의 경우 종자를 포함하는 중심 부위를 제외한 가식 부위에서는 과피 부위에서 중심 부위로 진행될수록 증가하였다. 환원당과 비환원당의 비율[(fructose+glucose)/sucrose]은 수박의 경우 과피 부위에서 중간 부위로 갈수록 약간식 감소하였으나 중심 부위에서는 오히려 높았다. 멜론의 경우 가식 부위중 과피 부위에서 중간 부위로 갈수록 감소하였으며 중심 부위와 중간 부위 간에는 유의적 차이가 없었다. 수박에서는 과피 부위에서 중심 부위로 갈수록 환원당과 비환원당 모두가 증가하였지만, 반면에 멜론에서는 환원당의 감소를 보였다.

• 한국생산제조학회지
• /
• 제8권2호
• /
• pp.137-143
• /
• 1999

The study of the high speed machining of inclined plane using ball end mill is performed. The use of ball end mill is rapidly growing in die and mold manufacturing. The cutting characteristics, such as cuttin g force, surface roughness and surface profile, are varied according to the variation of cutting directions. Free surface is cut using ball end mill, the surface profile is greatly varied depending upon the cutting direction. So this study will deal with the characteristics of cutting such as cutting efficiency according to the inclined plane of the workpiece, the cutting force according to tool path, surface profile and the roughness of surface. The optimal cutting direction to be applied the cutting for 3-D sculptured surfaces can be show through the results of this study.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.157-160
• /
• 1995

Pencil cutting can eliminate overload in uncut area caused by large diameter ball-end mill before finish cutting. As ball-end mill for pencil cutting is long and type, it is easily deflected by cutting force. The tool deflection when pencil cutting with thin and long ball-end mill is one of the main reason of the machining errors on a free-form surface. The purpose of the research is to find the characteristics of deflected cutter trajectory by eddy-current sensor.

• Structural Engineering and Mechanics
• /
• 제53권3호
• /
• pp.537-573
• /
• 2015

Multiple-step beams carrying intermediate lumped masses with/without rotary inertias are widely used in engineering applications, but in the literature for free vibration analysis of such structural systems; Bernoulli-Euler Beam Theory (BEBT) without axial force effect is used. The literature regarding the free vibration analysis of Bernoulli-Euler single-span beams carrying a number of spring-mass systems, Bernoulli-Euler multiple-step and multi-span beams carrying multiple spring-mass systems and multiple point masses are plenty, but that of Timoshenko multiple-step beams carrying intermediate lumped masses and/or rotary inertias with axial force effect is fewer. The purpose of this paper is to utilize Numerical Assembly Technique (NAT) and Differential Transform Method (DTM) to determine the exact natural frequencies and mode shapes of the axial-loaded Timoshenko multiple-step beam carrying a number of intermediate lumped masses and/or rotary inertias. The model allows analyzing the influence of the shear and axial force effects, intermediate lumped masses and rotary inertias on the free vibration analysis of the multiple-step beams by using Timoshenko Beam Theory (TBT). At first, the coefficient matrices for the intermediate lumped mass with rotary inertia, the step change in cross-section, left-end support and right-end support of the multiple-step Timoshenko beam are derived from the analytical solution. After the derivation of the coefficient matrices, NAT is used to establish the overall coefficient matrix for the whole vibrating system. Finally, equating the overall coefficient matrix to zero one determines the natural frequencies of the vibrating system and substituting the corresponding values of integration constants into the related eigenfunctions one determines the associated mode shapes. After the analytical solution, an efficient and easy mathematical technique called DTM is used to solve the differential equations of the motion. The calculated natural frequencies of Timoshenko multiple-step beam carrying intermediate lumped masses and/or rotary inertias for the different values of axial force are given in tables. The first five mode shapes are presented in graphs. The effects of axial force, intermediate lumped masses and rotary inertias on the free vibration analysis of Timoshenko multiple-step beam are investigated.

• Archives of Reconstructive Microsurgery
• /
• 제7권1호
• /
• pp.15-19
• /
• 1998

Microsurgical free-tissue transfer has allowed surgeons to salvage injured limbs but choosing appropriate healthy recipient vessels has proved to be a difficult problem. Retrograde flow flaps are established in island flaps. Retrograde flow anastomosis could prevent the possible kinking and twisting of the arterial anastomosis. By not interrupting the proximal blood flow to the fracture or soft tissue defect site, the compromise of fracture or wound healing might be prevented. We wished to estabilish an animal model in rat for a retrograde arterial flow based free flap. Nembutal-anesthetized male rats; weighing 250 to 300 gm, were used. The femoral artery and common carotid artery were exposed and divided. The systemic and retrograde arterial pressure were quantified by utilizing a parallel tubing system connected with peripheral arterial line. In this study, the retrograde flow was not pulsatile and the retrograde arterial pressure was 64-65mmHg, with a mean arterial pressure of 106-109mmHg. An epigastiic skin flap, measuring $3{\times}3cm$, was raised with its vascular pedicle. The epigastric free flap was transfered in the same rat from femoral vessels to carotid vessels in end to end fashion. We anastomosed the donor arteries to the distal parts of the divided recipient arteries and the donor veins to the proximal parts of the recipient veins. Twelve experiments were performed and the transplantations succeeded in 75 percent of them. In the remaining 25 percent, the experiments failed due to thrombosis at the site of anastpmosis, or other causes. This animal model represents an excellent example of retrograde arterial flow free flap transfer that is reliable.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 추계학술대회 논문집
• /
• pp.106-110
• /
• 2001

The ball-end milling process is widely used in the die/mold industries, and it is very suitable for the machining of free-form surfaces. However, this process is inherently inefficient process to compared with the end-milling or face milling process, since it relays upon the machining at the cutter/surface contact point. The machined part is the result of continuous point-to-point machining on the free-form surface. And cusps (or scallops) remain at the machined part along the cutter paths and they give the geometrical roughness of the workpiece. Thus, for the good geometrical roughness of the workpiece, it is required very tightly spaced cutter paths in this ball-endmilling process. However, with the tight cutter paths, the geometrical roughness of the workpiece is not regular on the workpiece since the cusp height is variable in the previously developed ISO-parametric or Cartesian machining methods. This paper suggests a method of tool path generation which makes the geometrical roughness of workpiece be constant through the machined surface. In this method, Ferguson Surface design Model is used and cusp height is derived from the instantaneous curvatures. And, to have constant cusp height, an increment of parameter u or v is estimated along the reference cutter path. In ball-end milling experiments, the cusp pattern was examined, and it was proved that the geometrical roughness could be regular by suggested tool path generation method.

• 펄프종이기술
• /
• 제30권3호
• /
• pp.1-6
• /
• 1998

Elementally Chlorine Free (ECF) bleaching will be superior than Totally Chlorine free (TCF) bleaching, not only because they have no significant difference in effluent toxicity, but also those pulps bleached by ECF have higher brightness, strength, yield, etc., over those by TCF. With this belief, this paper focused on the chemistry of chlorine dioxide decomposition and ionization, both in water solution and in pulp slurry. Special attention was paid to chlorate ion because there have been controversies as how it is formed and what its behavior to the end pH of pulp bleaching is. As a result, during ionization of chlorine dioxide with water, both chlorate and chlorite were found to increase with increasing pH, but during ionization with pulp, chlorite was found to increase with end pH while chlorate decreased with increasing end pH. In the case of ionization with water, the disproportion equation $2CIO_2 + OH^{-} \lightarrow H_2O + CIO_3^{-} + CIO_2^{-}$ was thought to become the main reaction with the increasing pH, while in the case of ionization with pulp, the reaction $HCIO + CIO_2^{-}\lightarow H^{+} + Cl^{-} + CIO_3^{-}$ was the main reaction contributing to the formation of chlorate. Based on this above opinion, the contrary results of chlorine dioxide ionization from different researchers were discussed and explained.

• 한국정밀공학회지
• /
• 제15권10호
• /
• pp.140-147
• /
• 1998

The dynamic behavior of elastically restrained beams under the action of distributed tangential forces is investigated in this paper. The beam, which is fixed at one end, is assumed to rest on an intermediate spring support. The governing equations of motion are derived from the energy expressions, and the finite element formulation is employed to calculate the critical distributed tangential force. Jump phenomena for the critical distributed tangential force and instability types are presented for various spring stiffnesses and support positions. Stability maps are generated by performing parametric studies to show how the distributed tangential forces affect the frequencies and the stability of the system considered. Through the numerical simulations, the following conclusioils are obtained: (i) Only flutter type instability exists for the dimensionless spring stiffness K $\leq$ 97, regardless of the position of the spring support. (ii) For the dimensionless spring stiffness K $\leq$ 98, the transition from flutter to divergence occurs at a certain position of the spring support, and the transition position moves from the free end to the free end of the beam as the spring stiffness increases. (iii) For K $\leq$ 10$^{6}$ the support condition can be regarded as a rigid support condition.