• 한국컴퓨터게임학회논문지
• /
• 제31권4호
• /
• pp.51-59
• /
• 2018

본 논문은 디지털 게임의 하위 장르 분화 양상을 고찰하고 각 양상에 따라 핵심 장르 요소가 변화하는 특성을 규명하는 데에 목적을 둔다. 디지털 게임의 장르는 변화를 거듭하는 생성적 체계이다. 기존 장르의 핵심 메커니즘을 수정하거나 뒤집으며 등장하는 게임의 하위 장르들은 게임의 장르 체계가 지닌 생성적 성격을 확인할수 있는 대표적 사례이다. 하위 장르 분화를 고찰한 기존의 연구들이 게임 텍스트의 계보학을 통해 메커니즘의 변화를 추적했다면, 본 논문은 플레이어가 장르 변화를 인지하는 원리에 초점을 두고 해당 양상을 분석한다. 개념적 혼성 이론을 통해 '로그라이크'와 '메트로배니아' 장르의 분화 과정을 분석한 결과 로그라이크는 상위 장르와의 프레임 대립을 통해, 메트로배니아는 상위 장르의 프레임 확장을 통해 변별력을 확보한 장르임을 확인했다. 프레임 대립에 따라 분화한 하위 장르의 경우 핵심 장르 요소는 독립성을 확보하고 손쉽게 타 장르와 결합되며, 프레임 확장에 따라 분화한 하위 장르의 경우 핵심 장르 요소는 맥락 의존성을 강하게 드러내며 해당 장르의 맥락을 벗어나 사용되기 힘들다는 특징을 보인다.

• Journal of Mechanical Science and Technology
• /
• 제16권11호
• /
• pp.1522-1539
• /
• 2002

In the present study, an explicit algebraic stress model is shown to be the exact tensor representation of algebraic stress model by directly solving a set of algebraic equations without resort to tensor representation theory. This repeals the constraints on the Reynolds stress, which are based on the principle of material frame indifference and positive semi-definiteness. An a priori test of the explicit algebraic stress model is carried out by using the DNS database for a fully developed channel flow at Rer = 135. It is confirmed that two-point correlation function between the velocity fluctuation and the Laplacians of the pressure-gradient i s anisotropic and asymmetric in the wall-normal direction. Thus, a novel composite algebraic Reynolds stress model is proposed and applied to the channel flow calculation, which incorporates non-local effect in the algebraic framework to predict near-wall behavior correctly.

• 한국산업경영시스템학회:학술대회논문집
• /
• 한국산업경영시스템학회 2002년도 춘계학술대회
• /
• pp.309-317
• /
• 2002

Line Balancing is the method enflowing workparts smoothly by balancing the worktime of processes, and reduces the cycle time. Soccer is the sports attacking the opposite team and defending a friendly area efficiently by means of ball. To accomplish this purpose, space balancing is the necessary condition. Soccer 'system' what we called 'formation' is the basic frame to balance the space of playground, operate the tactics. This paper introduces 'Dual Hexagon System', a quite new system in soccer, using line balancing principle. It also explains the correlations between line balancing and dual hexagon system, distinctions and position names of dual hexagon system, and then suggests success factors.

• 건축역사연구
• /
• 제14권3호
• /
• pp.89-102
• /
• 2005

Frank Lloyd Wright and Mies van der Rohe are two of the most influential architects in modern architecture. In spite of the different values in their architectural lives, the design of high-rise building had been a continuous matter of primary concern for them. The purpose of this study is to compare the architectural characteristics of the two master architects in terms of building form, structure, function, and envelop skin. glass. Both of them shared with the principle of organic architecture even in the design of high-rise buildings. However, the specific approaches to realize it in high-rise buildings are significantly different. Although they emphasized the integration of building form and structure, Wright regarded the reinforced concrete structure as an organic form-giver, while Mies introduced the steel skeleton structure only as an efficient and flexible building frame. As primary finishing materials for high-rise buildings, glass was used for functional purpose by Wright, but for visual purpose by Mies.

• 대한토목학회논문집
• /
• 제13권1호
• /
• pp.1-12
• /
• 1993

가상변수(假想變數)의 원리(原理)를 이용하여 공간박벽(空間薄璧) 및 뼈대구조물(構造物)의 비틂 및 횡좌굴해석(橫挫掘解析)을 수행하기 위한 접선강도(接線剛度)매트릭스들이 유도(誘導)된다. 구속(拘束)된 비틂을 고려하는 경우와 무시하는 경우 각각에 대하여, 탄성(彈性) 및 기하적(幾何的)인 강도(剛度)매트릭스들이 얻어지며 이때 축방향(軸方向) 변위(變位), 횡방향(橫方向) 처짐들, 그리고 비틂회전각에 대하여 적절한 Hermitian 다항식들을 형상함수(形狀函數)로 사용된다. 수치해석예제(數値解析例題)들을 통하여 본 연구(硏究)에서 제시한 이론(理論)의 정당성(正當性)을 입증(立證)한다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.458-461
• /
• 1995

A new type of rotational motor which is developed has a resolution smaller than 10 $^{-4}$ radian and can be accessed for full rotational angles. The operation principle of the motor is based on inchworm motion of two belt driving mechanism. Flexure hinge mechanism, which is pertinent to symmetry construction of the motor, is designed to minimze the effort to frame and is analyzed by using finite element method. Depending on input signal amplitude, rotational angle by one cycle is varied form 0.2*10 $^{-4}$ rad to 9.76* $^{-4}$ rad. This shows that it has the capability of getting very small rotational angle by considering radius of rotor and amplitude of input signal.

• 제어로봇시스템학회논문지
• /
• 제10권11호
• /
• pp.1017-1021
• /
• 2004

In this paper, a cost-effective integrated 3D system for measuring and sizing foot is proposed. The proposed system employs two CCDs and a laser line projector which are capable of accurately measuring foot. The measurement is based upon the biologically motivated stereo vision principle providing ruggedness against minor system distortions. According to the tolerance, calibration between two different views are implicitly applied. Furthermore, the measurement system employs a measurement base, a frame grabber, a CCD moving cart, a stepping motor and computer. Analysis and design procedure is presented for the calculation of the 3D foot data and the proposed system. Experimental results on the proposed system would verify the concept and system operation.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 연구회 합동 학술발표회 논문집
• /
• pp.18-22
• /
• 1998

A PWM inverter with an induction motor often has a problem with a high frequency leakage current that flows through stray capacitor between stator windings and a motor frame to ground. This paper presents an equivalent circuit for high frequency leakage currents in PWM inverter feeding an induction motor, which forms an LCR series resonant circuit. A conventional common mode ckoke or reactor in series between the ac terminals of a PWM inverter and those of an ac motor is not effective to reduce the rms and average values of the leakage current, but effective to reduce the peak value. Furthermore, this paper proposes a leakage current damper which is different in damping principle from the conventional common mode choke. It is shown theoretically and experimentally that the leakage current damper is able to reduce the rms value of the leakage current to 25%, where the core used in the leakage current damper is smaller than that of the conventional common-mode choke

• Archives of Plastic Surgery
• /
• 제41권1호
• /
• pp.19-28
• /
• 2014

Recently, in Korea, the septal extension graft from the septum or rib has become a common method of correcting a small or short nose. The success rate of this method has led to the blind faith that it provides superior tip projection and definition, and to the failure to notice its weaknesses. Even if there is a sufficient amount of cartilage, improper separation or fixation might waste the cartilage, resulting in an inefficient operation. Appropriate resection and effective fixation are essential factors for economical rhinoplasty. The septal extension graft is a remarkable procedure since it can control the nasal tip bidirectionally and three dimensionally. Nevertheless, it has a serious drawback since resection is responsible for septal weakness. Safe resection and firm reconstruction of the framework should be carried out. Operating on the basis of the principle of "safe harvest" and rebuilding the structures is important. Further, it is important to learn several techniques to manage septal weakness, insufficient cartilage quantity, and failure of the rigid frame during the surgery.

• Journal of the Korean Wood Science and Technology
• /
• 제37권2호
• /
• pp.128-136
• /
• 2009

Curved glued laminated timber (glulam) is rapidly coming into the domestic modern timber frame buildings and predominant in building construction. The radial stress is frequently occurred in curved beams and is a critical design parameter in curved glulam. Three models, Wilson equation, Exact solution and Approximation equation were introduced to determine the radial stress of curved glulam under pure bending condition. It is obvious that radial stress distribution between small radius and large radius was different due to slight change of neutral plane location to center line. If the beam design with extremely small radius, it should be considered to determine the exact location of maximum radial stress. The current standard KSF 3021 was reviewed and would be considered some adjustment determining the optimum radius in curved glulam. Current design principle is that the stress factor is given by the curvature term only in constant depth of the beam, but like tapered or small radius of beams, the stress factor by Wilson equation was underestimated. So current design formula should be considered to improvement for characterizing the radial stress factor under pure bending condition.