• 한국산학기술학회논문지
• /
• 제14권1호
• /
• pp.57-62
• /
• 2013

카트 차체에는 현가장치와 차동장치가 존재하지 않으므로 카트주행 중 발생하는 프레임의 변형은 탄성변형으로 인한 주행성능과 프레임의 피로수명에 영향을 미친다. 선회주행 시 비틀림 변형에 의한 카트의 거동은 이 두 가지 변형에 결정적 원인을 제공한다. 이러한 곡선구간에서 카트의 동적 거동을 분석하기 위하여 GPS를 이용하여 차량의 궤적을 추적하고 카트 프레임 강에 작용하는 비틀림 응력을 측정하였다. 레저와 레이싱 카트 프레임의 기계적 성질을 파악하기 위해 재질 분석과 인장시험을 실시하여 각 프레임의 재료 특성을 분석하였다. 비틀림 응력집중과 프레임 비틀림은 프레임 해석을 통해 조사되었다. 또한 주행 분석 장치를 이용하여 레저와 레이싱 카트를 각 조건별로 실차실험을 수행하였고, 이를 통해 곡선구간에서 카트의 주행거동을 분석하였다. 선회주행 시 차량에 원심력에 의한 하중이동의 현상이 발생했으며, 이로 인해 카트 프레임 강에 비틀림 응력이 발생하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.843-851
• /
• 2007

It is known that bogie frame must have sufficient stiffness for car body and passenger weight and transfer traction and braking force, and as of today most studies and verifications are restricted to static and fatigue analysis for force acted on bogie frame. Bogie frame is mounted with equipments to control the signal, traction and so on, this equipment's behavior is subjected to vibration mode occurs on running condition. If the resonance occurs on this equipment, the possibility of crack occurrence on bracket connected with equipment and bogie frame will be increased. In this paper, the method of vibration strength verification for bracket attached on bogie frame will be introduced by using frequency response method.

• Structural Engineering and Mechanics
• /
• 제32권2호
• /
• pp.321-335
• /
• 2009

When a roof frame is subjected to the airblast loading, the conventional way to analyze the damage of the frame or design the frame is to use single degree of freedom (SDOF) model. Although a roof frame consists of beams and girders, a typical SDOF analysis can be conducted only separately for each component. Thus, the rigid body motion of beams by deflections of supporting girders can not be easily considered. Neglecting the beam-girder interaction in the SDOF analysis may cause serious inaccuracies in the response values in both Pressure-Impulse curve (P-I) and Charge Weight-Standoff Diagrams (CWSD). In this paper, an inelastic two degrees of freedom (TDOF) model is developed, based on force equilibrium equations, to consider beam-girder interaction, and to assess if the modified SDOF analysis can be a reasonable design approach.

• 대한수학회보
• /
• 제49권3호
• /
• pp.635-645
• /
• 2012

In this study, we investigate the curvature functions of ruled surface with lightlike ruling for a null curve with Cartan frame in Minkowski 3-space. Also, we give relations between the curvature functions of this ruled surface and curvature functions of central normal surface. Finally, we use the curvature theory of the ruled surface for determine differential properties of a robot end-effector motion.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 추계학술대회 논문집
• /
• pp.628-633
• /
• 2004

we studied the structural weak areas of an electric car bogie frame by finite element analysis. The bogie frame under consideration is a part of the standard electric car with aluminium car body. Vertical, torsional. lateral and longitudinal loadings were applied. Numerical results were compared with the experimental results. The two results are in a good agreement.

• 동력기계공학회지
• /
• 제6권3호
• /
• pp.57-63
• /
• 2002

This paper describes the acoustic analysis of mid duty truck. The focus of the analysis is on structure borne engine noise with major contributions of 2nd order. It has been previously recognized that the noise contribution of each transfer path of structure borne noise can be varied with the charateristics of each mounts and vibro acoustic sensitivity of car body. The structure of car body will be split up into three major sub components, which are modeled separately, the engine, the frame and the cab. The acoustic performance is evaluated on three levels: engine to frame transfer, frame to cab transfer, and panel contribution from cab to driver. In order to perform these analyses, analytical models are created for the engine, frame, cab and acoustic cavity. The models are linked through a coupled fluid structure calculation, and through FRF Based Substructuring for the structural couplings. Based on the structural coupling calculations, a transfer path analysis is performed to identify the most important transfer paths. These paths are then the focussing points for applying modifications to the structure or the mount system. Finally, a number of modification are proposed and their effect is quantified.

• 한국자동차공학회논문집
• /
• 제11권5호
• /
• pp.89-94
• /
• 2003

Rolling stock structures such as bogie frame and car body play an important role for the support of vehicle leading. In general, more than 25 years' durability is needed for them. A lot of study has been carried out for the prediction of the fatigue life of the bogie frame and car body in experimental and theoretical domains. One of the new methods is a probabilistic fatigue lift evaluation. The objective of this paper is to estimate the fatigue lift of the bogie frame of an electric car, which was developed by the Korea Railroad Research Institute (KRRI). We used two approaches. In the first approach probabilistic distribution of S-N curve and limit state function of the equivalent stress of the measured stress spectra are used. In the second approach, limit state function is also used. And load spectra measured by strain gauges are approximated by the two-parameter Weibull distribution. Other probabilistic variables are represented by log-normal and normal distributions. Finally, reliability index and structural integrity of the bogie frame are estimated.

• 한국전기전자재료학회논문지
• /
• 제24권9호
• /
• pp.733-738
• /
• 2011

A novel design of a simple square-frame USM (ultrasonic motor) was proposed. The stator of the motor consists of a square-frame shape elastic body and four rectangular plate ceramics. The four ceramics were attached to inner surfaces of the square frame elastic body. The same phase voltages were applied to the ceramics on horizontal surfaces, and 90 degree phase difference voltage were applied to the ceramics on vertical surfaces. To find a model that generates elliptical motion at outside of the stator, the finite element analysis program ATILA was used. The analyzed results were compared to the experimental results. As result, the model EL10EH3ET0.5CL4 which generates the maximum elliptical displacement was chosen by analyzing the resonance mode according to changes in frequency.

• 대한조선학회논문집
• /
• 제40권1호
• /
• pp.63-68
• /
• 2003

Systematic geometrical variation method of hull forms, such as "1 -Cp", "Swinging" and "Lackenby" are widely used in the early stage of a new design from those of a similar parent ship, which shows a better performance through the model test and/or sea trials. This method is simple and easy to modify original hull forms without changing the main characteristics. The shape of the prismatic curie can be easily varied by these methods, however, the frame line shape in the body plan can′t be generated easily, when the section shapes are complicated or have discontinuities or the mismatch of the body plan and the stem and stern profiles. To overcome this drawback of the hull form variations, a simple and useful method has been proposed in the present study.

• 한국정밀공학회지
• /
• 제14권8호
• /
• pp.108-114
• /
• 1997

A simple and efficient method is presented for the dynamics of interconnected flexible beams having large rigid body rotations. A simple mass matrix is obtained by interpolating the displacements in the global inertia frame, and the elastic force is also simply computed by using linear finite element technique with the moving frame attached to the beam. For the beams connected by revolute joints, kinematic constraints and relative rotations between the beans are not required and the equations of motions are time integrated by a simple ODE technique. Numerical simulations are conducted to demonstrate the accuracy and efficiency of the present technique.