• Journal of Astronomy and Space Sciences
• /
• v.36 no.2
• /
• pp.97-103
• /
• 2019

An automated signal-acquisition method for the NASA's space geodesy satellite laser ranging (SGSLR) system is described as a selection of two system parameters with specified probabilities. These parameters are the correlation parameter: the minimum received pulse number for a signal-acquisition and the frame time: the minimum time for the correlation parameter. The probabilities specified are the signal-detection and false-acquisition probabilities to distinguish signals from background noise. The steps of parameter selection are finding the minimum set of values by fitting a curve and performing a graph-domain approximation. However, this selection method is inefficient, not only because of repetition of the entire process if any performance values change, such as the signal and noise count rate, but also because this method is dependent upon system specifications and environmental conditions. Moreover, computation is complicated and graph-domain approximation can introduce inaccuracy. In this study, a new method is proposed to select the parameters via a conditional equation derived from characteristics of the signal-detection and false-acquisition probabilities. The results show that this method yields better efficiency and robustness against changing performance values with simplicity and accuracy and can be easily applied to other satellite laser ranging (SLR) systems.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.3C
• /
• pp.271-278
• /
• 2006

Rate-constrained coding is one of the many coding-efficiency oriented tools of H.264/AVC, but mode decision process of RDO(Rate distortion optimization) requires high computational complexity. Many fast mode decision algorithms have been proposed to reduce the computational complexity of mode decision. In this paper, we propose two algorithms for reduction of mode decision in H.264/AVC, which are the fast reference frame selection and selective intra prediction mode decision. Fast reference frame selection is efficient for inter predication and selective intra prediction mode decision can effectively reduce excessive calculation load of intra prediction mode decision. The simulation results showed that the proposed methods could reduce the encoding time of the overall sequences by 44.63% on average without any noticeable degradation of the coding efficiency.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 1998.06b
• /
• pp.92-97
• /
• 1998

For the efficient searching and browsing of digital video, it is essential to extract the internal structure of the video contents. As an example, a news video consists of several sections such as politics, economics, sports and others, and also each section consists of individual topics. With this information in hand, users can ore easily access the required video frames. This paper addresses the problem of automatic shot boundary detection and selection of representative frames (R-frames), which are the essential step in recognizing the internal structure of video contents. In the shot boundary detection, a new algorithm that have dual detectors which are designed specifically for the abrupt boundaries (cuts) and gradually changing bounaries respectively is proposed. Compared to the existing 미algorithms that mostly have tried to detect both types by a single mechanism, the proposed algorithm is proved to be more robust and accurate. Also in the problem of R-frame selection, simple mechanical approaches such as selecting one frame every other second have been adopted. However this approach often selects too many R-frames in static short, while drops important frames in dynamic shots. To improve the selection mechanism, a new R-frame selection algorithm that uses motion information extracted from pixel difference is proposed.

• Journal of IKEEE
• /
• v.24 no.4
• /
• pp.1050-1057
• /
• 2020

Immersive 360-degree media has a problem of slowing down the video recognition speed when the video is processed by the conventional method using a variety of rendering methods, and the video size becomes larger with higher quality and extra-large volume than the existing video. In addition, in most cases, only one scene is captured by fixing the camera in a specific place due to the characteristics of the immersive 360-degree media, it is not necessary to extract feature information from all scenes. In this paper, we propose a reference frame selection method for immersive 360-degree media and describe its application process to copyright protection technology. In the proposed method, three pre-processing processes such as frame extraction of immersive 360 media, frame downsizing, and spherical form rendering are performed. In the rendering process, the video is divided into 16 frames and captured. In the central part where there is much object information, an object is extracted using an RGB vector per pixel and deep learning, and a reference frame is selected using object feature information.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.6C
• /
• pp.842-847
• /
• 2004

We present a new video coding technique to tradeoff frame rate and picture quality for low bit rate video coding. We show a model equation for selecting the optimal frame rate from the motion content of the source video. We can determine DCT quantization parameter (QP) using the frame rate and bit rate. For objective video quality measurement we propose a simple and effective error measure for skipped frames. The proposed method enhances the video quality up to 2 ㏈ over the H.263 TMN5 encoder.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.46 no.4
• /
• pp.58-66
• /
• 2009

Recently the emerging demands of the light-video encoder promotes lots of research efforts on DVC (Distributed Video Coding). As an appropriate video compression method, DVC has been studied, and Wyner-Ziv (WZ) video compression is its one representative structure. The WZ encoder splits the image into two kinds of frames, one is key frame which is compressed by conventional intra coding, and the other is WZ frame which is encoded by WZ coding. The WZ decoder decodes the key frame first, and estimates the WZ frame using temporal correlation between key frames. Estimated WZ frame (Side Information) cannot be the same as the original WZ frame due to the absence of the WZ frame information at decoder. As a result, the difference between the estimated and original WZ frames are regarded as virtual channel noise. The WZ frame is reconstructed by removing noise in side information. Therefore precise noise estimation produces good performance gain in WZ video compression by improving error correcting capability by channel code. But noise cannot be estimated precisely at WZ decoder unless there is good WZ frame information, and generally it is estimated from the difference of corresponding key frames. Also the estimated noise is limited by comparing with frame level noise to reduce the uncertainty of the estimation method. However these methods cannot provide good noise estimation for every frame or each bit plane. In this paper, we propose a noise nodel selection method which chooses a better noise model for each bit plane after generating candidate noise models. Experimental result shows PSNR gain up to 0.8 dB.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.2
• /
• pp.143-148
• /
• 2014

Particle filter algorithm has been proven very successful for non-linear and non-Gaussian estimation problem and thus it has been widely used for object tracking for video signals. If the object moves significantly, particle filter needs very large number of particles to track object and this results high computational cost. In this paper, modified particle filter by adopting motion vector is proposed for tracking vehicle in low frame rate(LPR) video input, which the object moving significantly and randomly between consecutive frames. In the proposed algorithm, motion vector is applied in selection and observe step. The experimental result shows that the proposed particle filter can track vehicle successfully in the case when previous one fails. And it also shows the propose method increases the precision of tracking.

• Transactions of Materials Processing
• /
• v.13 no.8
• /
• pp.689-695
• /
• 2004

This paper is concerned with the analysis of the forming load characteristics of a forward-backward can extrusion process. The analysis in this paper is extended to the selection of press frame capacity for producing efficiently final product at low cost. The possible extrusion processes to shape a forward-backward can part with different outer diameters are categorized to investigate quantitatively the forming load, forming energy and maximum pressure exerted on the die-material interface. The categorized processes are composed of combined and/or some basic extrusion processes. After the analysis of the forming load characteristics, the frame capacity of press suitable for a selected process could be determined along with securing the load capacity and with considering productivity. In addition, it is also suggested that different load capacities be selected for different dimensions of a part such as the wall thickness in forward direction. The work in this paper could be a good reference for analysis of complex extrusion and selection of proper frame capacity of press to achieve low production cost and thus high productivity.

• Journal of Korean Association for Spatial Structures
• /
• v.1 no.2 s.2
• /
• pp.59-66
• /
• 2001

This paper describes three modules for development of the Space Frame Integrated Design System(SFIDS). The Control Module is implemented to control the developed system. The Model Generation Module based on PATRAN user interface enables users to generate a complicated finite element model for space frame structures. The Optimum Design Module base on a branch of combinatorial optimization techniques which can realize the optimization of a structure having a large number of members designs optimum members of a space frame after evaluating analysis results. The Control Module and the Model Generation Module Is implemented by PATRAN Command Language(PCL) while C++ language is used in the Optimum Design Module. The core of the system is PATRAN database, in which the Model Generation Module creates information of a finite element model. Then, PATRAN creates Input files needed for the analysis program from the information of the finite element model in the database, and in turn, imports output results of analysis program to the database. Finally, the Optimum Design Module processes member grouping of a space frame based on the output results, and performs optimal member selection of a space frame. This process is repeated until the desired optimum structural members are obtained.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.7
• /
• pp.1540-1546
• /
• 2014

In order to resolve coverage hole problems caused by indoor-BS (IBS) faults, we propose a new frame structure and practical algorithm based on optimization technique. Our main contributions can be described as follows: 1) a frame structure with healing channels for solving abnormal IBS faults; and 2) an efficient heuristic resource allocation algorithm with fixed IBS selection to reduce the complexity for the optimization problem. Through intensive simulations, we evaluate the performance excellency of our proposed algorithm with respect to average cell capacity and user fairness compared with conventional algorithms.