• Journal of architectural history
• /
• v.25 no.5
• /
• pp.51-62
• /
• 2016

Since the recent Hanok boom in Korea, Contemporary Hanok has been evolving in terms of structure, space, form, etc. To get a comprehensive understanding of the diversified Contemporary Hanok, this paper aims at its type classification by analyzing architects' designs since 2000. The criteria for the classification are two: (1) renovation [Re] or new construction [New]; and (2) degree of Contemporary Hanok's deviation from the traditional Hanok's standard - maintaining the traditional form [Main]; changing space within the traditional form [Space]; changing the traditional frame [Frame]; and juxtaposing the traditional and the modern [Combi]. From the two criteria, this paper deduced eight types of Contemporary Hanok, named respectively: Re-Main, New-Main, Re-Space, New-Space, Re-Frame, New-Frame, Re-Combi, and New-Combi, and studied their cases. It can be argued that various aspects of Contemporary Hanok and their critical meanings were well-investigated through this type classification and case-studies.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.6 no.4
• /
• pp.219-223
• /
• 2002

The actual behavior of joint is traditionally disregarded in steel frame design. In fact, the structural analysis of steel frames is generally carried out by assuming that joints fulfil the ideal condition of either a hinge or a fixed-end restraints. In this way, calculations are made somewhat simpler, but the structural model is not able to reflect the actual structural response. Therefore, steel frame classification system for estimation or analysis about behavior of steel frame should be established, and range that each connections belongs should be divided definitely. This research presents realistic and practical moment-rotation relation through investigation and analysis of steel frame beam-to-column classification system.

• Smart Media Journal
• /
• v.9 no.1
• /
• pp.23-29
• /
• 2020

This paper presents an approach for dynamic hand gesture recognition by using algorithm based on 3D Convolutional Neural Network (3D_CNN), which is later extended to 3D Residual Networks (3D_ResNet), and the neural network based key frame selection. Typically, 3D deep neural network is used to classify gestures from the input of image frames, randomly sampled from a video data. In this work, to improve the classification performance, we employ key frames which represent the overall video, as the input of the classification network. The key frames are extracted by SegNet instead of conventional clustering algorithms for video summarization (VSUMM) which require heavy computation. By using a deep neural network, key frame selection can be performed in a real-time system. Experiments are conducted using 3D convolutional kernels such as 3D_CNN, Inflated 3D_CNN (I3D) and 3D_ResNet for gesture classification. Our algorithm achieved up to 97.8% of classification accuracy on the Cambridge gesture dataset. The experimental results show that the proposed approach is efficient and outperforms existing methods.

• Steel and Composite Structures
• /
• v.37 no.2
• /
• pp.193-209
• /
• 2020

In this paper, the efficiency of five Machine Learning (ML) methods consisting of Deep Learning (DL), Support Vector Machine (SVM), Random Forest (RF), Decision Tree (DT), and Gradient Tree Booting (GTB) for regression and classification of the Ultimate Load Factor (ULF) of nonlinear inelastic steel frames is compared. For this purpose, a two-story, a six-story, and a twenty-story space frame are considered. An advanced nonlinear inelastic analysis is carried out for the steel frames to generate datasets for the training of the considered ML methods. In each dataset, the input variables are the geometric features of W-sections and the output variable is the ULF of the frame. The comparison between the five ML methods is made in terms of the mean-squared-error (MSE) for the regression models and the accuracy for the classification models, respectively. Moreover, the ULF distribution curve is calculated for each frame and the strength failure probability is estimated. It is found that the GTB method has the best efficiency in both regression and classification of ULF regardless of the number of training samples and the space frames considered.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2022.06a
• /
• pp.1278-1281
• /
• 2022

현재 Action classification model은 computational resources의 제약으로 인해 video전체의 frame으로 학습하지 못한다. Model에 따라 다르지만, 대부분의 경우 하나의 action을 학습시키기 위해 보통 많게는 32frame, 적게는 8frame으로 model을 학습시킨다. 본 논문에서는 이 한계를 극복하기 위해 하나의 video의 많은 frame들을 mix-up과정을 거쳐 한장의 frame에 여러장의 frame 정보를 담고자 한다. 이 과정에서 video의 시간에 따른 변화(temporal- dynamics)를 손상시키지 않기 위해 linear mix-up이라는 방법을 제안하고 그 성능을 증명하며, 여러장의 frame을 mix-up시켜 모델의 성능을 향상시키는 가능성에 대해 논하고자 한다.

• Journal of Institute of Control, Robotics and Systems
• /
• v.4 no.3
• /
• pp.372-377
• /
• 1998

This paper deals with the detection, feature extraction and classification of surface defects in cold rolled strips. Inspection systems are one of the most important fields in factory automation. Defects such as slipmark and dullmark can be effectively detected with a Gaussian matched filter because their shapes are similar to Gaussian. It is justified that the proposed WF(Wavelet Frame) method could be regarded as multiscale Gaussian matched filter which can be applied to the inspection of cold rolled strip. After a wavelet frame transform, the entropies and moments are computed for each subband which pass through both local low pass filter and nonlinear operator. With these features as input, a MLP(Multi Layer Perceptron) is used as a classifier. The proposed inspection method was applied to the real images with defects, and hence showed good performance. The role of each extracted feature is analyzed by KLT(Karhunen-Loeve Transform).

• The Journal of the Korea Contents Association
• /
• v.11 no.4
• /
• pp.51-56
• /
• 2011

This paper proposes an efficient moving picture compression for video sequences with luminance variations. In the proposed algorithm, the luminance variation parameters are estimated and local motions are compensated. To detect the frame required luminance compensation, we employ the frame classification based on the cross entropy between histograms of two successive frames, which can reduce the computational redundancy. Simulation results show that the proposed method yields a higher peak signal to noise ratio (PSNR) than that of the conventional methods, with a low computational load, when the video scene contains large luminance variations.

• Speech Sciences
• /
• v.11 no.2
• /
• pp.193-210
• /
• 2004

In this paper, we develop a real time lip-synch system that activates 2-D avatar's lip motion in synch with an incoming speech utterance. To realize the 'real time' operation of the system, we contain the processing time by invoking merge and split procedures performing coarse-to-fine phoneme classification. At each stage of phoneme classification, we apply the support vector machine (SVM) to reduce the computational load while retraining the desired accuracy. The coarse-to-fine phoneme classification is accomplished via two stages of feature extraction: first, each speech frame is acoustically analyzed for 3 classes of lip opening using Mel Frequency Cepstral Coefficients (MFCC) as a feature; secondly, each frame is further refined in classification for detailed lip shape using formant information. We implemented the system with 2-D lip animation that shows the effectiveness of the proposed two-stage procedure in accomplishing a real-time lip-synch task. It was observed that the method of using phoneme merging and SVM achieved about twice faster speed in recognition than the method employing the Hidden Markov Model (HMM). A typical latency time per a single frame observed for our method was in the order of 18.22 milliseconds while an HMM method applied under identical conditions resulted about 30.67 milliseconds.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.2C
• /
• pp.181-185
• /
• 2009

When we classify underwater transient signals with frame-by-frame decision, a database design method for reference feature vectors influences on the system performance such as size of database, computational burden and recognition rate. In this paper the LBG vector quantization algorithm is applied to reduction of the number of feature vectors for each reference signal for efficient classification of underwater transient signals. Experimental results have shown that drastic reduction of the database size can be achieved while maintaining the classification performance by using the LBG vector quantization.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.14 no.4
• /
• pp.332-339
• /
• 2014

Face classification has wide applications in security and surveillance. However, this technique presents various challenges caused by pose, illumination, and expression changes. Face recognition with long-distance images involves additional challenges, owing to focusing problems and motion blurring. Multiple frames under varying spatial or temporal settings can acquire additional information, which can be used to achieve improved classification performance. This study investigates the effectiveness of multi-frame decision-level fusion with photon-counting linear discriminant analysis. Multiple frames generate multiple scores for each class. The fusion process comprises three stages: score normalization, score validation, and score combination. Candidate scores are selected during the score validation process, after the scores are normalized. The score validation process removes bad scores that can degrade the final output. The selected candidate scores are combined using one of the following fusion rules: maximum, averaging, and majority voting. Degraded facial images are employed to demonstrate the robustness of multi-frame decision-level fusion in harsh environments. Out-of-focus and motion blurring point-spread functions are applied to the test images, to simulate long-distance acquisition. Experimental results with three facial data sets indicate the efficiency of the proposed decision-level fusion scheme.