• Journal of Welding and Joining
• /
• 제3권2호
• /
• pp.52-63
• /
• 1985

Fillet welded joints, specially in ship structure, are well known the critical part where stress concentrate or crack initiates and grows. This paper is concerned with the study of the behavior of fatigue crack growth t the root and toe of load carrying cruciform fillet welded joints under three points bending by the determination of stress intensity factor from the J-Integral, using the Finite Element Method. The stress intensity factor was investigated in accordance to the variation of the weld size (H/Tp). weld penetration (a/W) and plate thickness (2a'/Tp). As mixed mode is occurred on account of shearing force under the three points bending, Stern's reciprocal theory is applied to confirm which mode is the major one. The main results may be summarized as follows 1) The calculation formula of the stress intensity factor at the both of root and toe of the joint was obtained to estimate the stress intensity factor in the arbitrary case. 2) The change of stress field around crack tip gives much influence on each other at the roof and toe as H/Tp decreases. 3) Mode I is a major mode under the three points bending.

• 한국해양공학회지
• /
• 제1권2호
• /
• pp.93-100
• /
• 1987

Corrosion fatigue cracking of the austenitic stainless steel(bese metal & heat affected zone by TIG weld) was studied experimentally under the environments of various specific resistance and air. The characteristics of corrosion fatigue crack growth rate and the environmental constants of paris' rule were investigated for SUS 304 weldments in the various specific resistance. The influences of stress intensity factor range and corrosion on the crack growth rate were compared. The characteristics of corrosion fatigue cracking for the weldments were inspected from mechanical, electrochemical and microstructural point of view. Main results obtained are as follows: 1) As the specific resistance decreases, the environmental constant C of paris'rule increases(hence the corrosion fatigue crack growth rate is rapid), but the environmental constant m decreases, so the effect of corrosion to the crack growth rate is more susceptible than thet of stress intensity factor range. 2) As the stress intensity factor range decreases, the corrosion fatigue crack growth rate of heat affected zone is more susceptible than that of the base metal. 3) The corrosion fatigue crack growth rate of the heat affected zone is more rapid than that of the base metal, because of the phenomenon of softening and the less noble potential coused by wedlding heat cycle. 4) The corrosion fatigue cracking of SUS 304 weldment appears transgranular fracture.

• 한국정밀공학회지
• /
• 제12권8호
• /
• pp.147-155
• /
• 1995

Recent experimental studies have been shown that strain gages can be employed to determine either static or dynamic stress intensity factors $K_{I}$ wiht relatively simple experiments. However, it does not usually provide a reliable value of stress intensity factor because of local yielding and limited regions for strain gage placement at the vicinity of the crack tip. This paper attempted to define a valid region and to indicate procedures for locating and orienting the strain gage to determine static toughness $K_{Is}$ accurately form one strain gage readings with respect to varying loadings. The strain gage methods was used for compact tension specimens made of Polycarbonate and PMMA(polymethyl methacrylate). Series expansions of the static and dynamic strain fields are applied. Strain gage orientation and location are then studied to optimize the strain response. Especially, in the dynamic experiment, the specimen employed is an oversized Charpy V-notch specimen which has been modified to provide significant constraint with a large elevation of the flow stress. The impact behavior of the specimen is monitored by placing strain gage near the crack tip. The dynamic toughness $K_{Id}$ is determined from the strain time traces of this gage.e.

• 한국강구조학회 논문집
• /
• 제10권3호통권36호
• /
• pp.423-435
• /
• 1998

본 연구에서는 기존의 강교에서 흔하게 발견되고 있는 맞대기 용접부의 용입불량으로 인한 부재의 피로강도 저하도를 정량적으로 평가하고자 하였다. 이를 위하여 강교량의 재료로 널리 사용되고 있는 SWS490강으로 제작된 완전용입 및 용입깊이가 서로 다른 불완전용입 맞대기 용접시험편을 대상으로 일정진폭하중시험을 수행하여 S-N선도를 산출하고 이를 비교 검토하였으며, 파괴역학적 방법을 이용하여 불완전용입 용접재의 피로수명을 계산하였다. 본 연구의 결과로서, 완전용입 용접재의 경우 AASHTO의 피로강도등급선도와의 비교에서 피로한도값은 A등급보다 높은 값을 보였고, S-N선도의 기울기는 5.57로 매우 높게 나타났다. 불완전용입 용접재의 경우 불완전용입깊이 D가 증가함에 따라 피로강도가 감소하는데, D=14.7mm인 경우 AASHTO의 E'등급보다 낮게 나타난다. 불완전용입 용접재의 파손거동에서 피로균열은 내부 용접루트 선단부에서 a/c가 매우 작은 반타원형 표면균열의 형태로 발생하고, 시험체의 두께방향으로 진전하여 최종파손을 유발한다. 파괴역학적 방법을 이용한 불완전용입 용접재의 피로수명을 평가하기 위하여 3차원 반타원형 균열형상에 대한 응력확대계수 K를 유한요소해석으로 구하였다. 여기서 얻어진 K값과 실험으로 얻어진 Paris식의 상수를 이용하여 불완전용입 용접재의 피로수명을 계산하여 비교하였다. 그리고 실제 불완전용입 맞대기용접부의 파손으로 붕괴사고가 발생한 성수대교의 수직재에 본 연구결과를 적용하여 피로수명을 계산해 보았다.

• 한국가스학회지
• /
• 제25권6호
• /
• pp.53-65
• /
• 2021

수소충전소의 빠른 확장 및 설치와 동시에 수소충전소의 고압수소 충전 압력용기에 대한 안전 검사가 매우 중요하게 이루어져야 한다. 이 중 ASME에 따르면 일정 압력 이상의 수소를 보관하는 용기에 대해서는 수소 취성 검사를 반드시 해야 한다. 수소취성 검사의 주된 시험방법으로 고압의 수소분위기에서 파괴시험 및 피로 파괴시험을 실시해야 하며, 이를 통해 수소 분위기에서 압력용기의 내구한계를 측정하고, 사용한계를 결정하도록 되어 있다. 세부적으로 stress intensity factor(K)로부터 한계균열깊이를 계산하고, da/dN(피로성장율)로부터 사용수명을 결정할 수 있다. API579-1/ ASME FFS-1 part 9에서 crack-like flaws의 모드에 따른 계산방법을 예시하고 있으나, 플레이트, 실린더 등 다양한 형태의 형상에 대하여 균열의 형상, 위치 등에 의하여 대략 55개 모드가 있고, 상당히 복잡한 수식으로 인하여 쉽게 접근을 못한다. 본 연구에서는 엑셀 및 VBA를 통하여 수치해석적으로 파괴역학계산하는 방법을 소개하고자 한다. 또한, 이를 적용하여 압력용기의 두께와 내경이 수명에 미치는 영향을 분석해 보았다.

• Journal of Korean Neurosurgical Society
• /
• 제46권6호
• /
• pp.528-531
• /
• 2009

Objective : Although gadolinium enhancement of compression fractures is well known, the enhancement pattern of the acute stage of a fracture is not completely understood. Here, we investigated the enhancement pattern of acute vertebral compression fractures (VCFs). Methods : We conducted a retrospective study of patients with acute osteoporotic VCFs admitted to hospital between January 2004 and December 2005. The demographic details, stage of the fracture, management data, and results were analyzed. There were nine men and 22 women, and the mean age was 71 years (range, 53-92 years). According to the onset of pain, patients were divided into the following four groups : Group I (less than 3 days), Group II (4-7 days), Group III (8-14 days), and Group IV (14-30 days). Results : All patients had central low-signal intensity of the nonenhancing part of vertebral bodies on T1 images. Enhancing box sign (EBS) was seen 7 days of VCF development. After 7 days of onset (Groups III and IV), patch or Kummell's enhancements occurred. EBS has been statistically correlated with stage of compression fracture (Pearson's correlation = -0.774). However, EBS had no statistically significant correlation with prognosis in our study (Pearson's correlation = 0.059). Conclusion : EBS represents a characteristic sign 7 days of VCF development.

• 폴리머
• /
• 제25권3호
• /
• pp.435-440
• /
• 2001

본 연구에서는 일방향 탄소/탄소 복합재료에 산화억제제로 사용된 $MoSi_2$의 첨가량에 따른 복합재료의 부착력, 파괴인성 그리고 충격강도와의 관계를 고찰하였다. 산화억제제로 사용한 이규화 몰리브덴 (MoSi$_2$)은 복합재료의 내산화 특성을 향상시키기 위하여 각각 4, 12, 20wt%의 중량비로 페놀수지에 함침시켰다. 본 연구에 있어서 복합재료의 부착력은 접촉각 측정에 의한 Wilhelmy 방정식을 사용하여 계산하였다. 파괴인성과 충격강도는 임계 세기인자 측정을 위한 3점 굴곡 시험 방법과 Izod 충격시험에 의해 각각 측정하였다. 그 결과, $MoSi_2$가 첨가된 탄소/탄소 복합재료의 파괴인성과 충격강도는 증가하였다. 특허 l2wt%의 $MoSi_2$가 첨가된 복합재료가 London dispersive 요소($W_A\;^L$)의 증가에 의한 가장 큰 부착력을 나타내었으며, 이는 복합재료의 각 구성요소간의 계면결합력 증가에 따른 결과라 사료된다.

• 대한치과기공학회지
• /
• 제27권1호
• /
• pp.89-95
• /
• 2005

In the manufacture of ceramo-metal crown, difference of fracture strength according to the metal depth has been known to be an important influence on enough intensity and internal stress to endure an occlusion-pressure as well as aesthetics of rehabilitating similar colour such as natural teeth. Depth of ceramic material could be determined by that of metal in three groups: first case of thin depth, second case of thick depth, and third case of constant depth. For the enhancement of the fracture strength between metal and ceramic materials and aesthetic satisfaction, a study on the bonding force, fracture strength, and aesthetics have been required more. In this study, therefore metal coping were made in three groups of A, B and C by using both ceramic powder of Norithe and metal of Columbium, which have been used primarily in the market. A group was made in $0.2mm\times10mm\times10mm$, B group was made in $0.4mm\times10mm\times10mm$, and, C group was made in $0.8mm\times10mm\times10mm$, respectively. The number of metal coping in each group was 10, and total sample numbers used in this study were 30 metal copings. After these metal coping tissue were in the process of build-up in 1.5mm constant depth of porcelain, firing, and glazing, the fracture strength about each metal coping tissue was investigated using oil press. It was found that the average values of durable occlusion pressure for separation of ceramic material in the porcelain fused to metal crown (PFM) in the each group showed the increasing order of A group (30 bar), B group (42 bar), and C group (44 bar), respectively. Proper depth of metal coping in the PFM was considered to be 0.4mm in the B group because this metal size showed higher durable property to the occlusion pressure and better coupling strength in the ceramo-metal crown.

• 한국안전학회지
• /
• 제12권4호
• /
• pp.230-240
• /
• 1997

본 연구에서는 폴리프로필렌 섬유보강 콘크리트의 파괴특성을 알아보기 위해 Monofilament 섬유와 Fibrillated 섬유의 두 종류 폴리프로필렌 섬유를 선택하여 10$\times$10$\times$50 cm 보 시편을 만들었는데, 이때 사용된 두 종류의 섬유 길이는 19 mm이고, 섬유 혼입량은 0%, 1%, 2%, 3%로 하였으며, 초기균열 깊이의 영향을 알아보기 위해 초기 균열길이를 각 섬유 혼입량에 따라 1.5cm, 3.0cm, 4.5cm로 하여 실험을 수행하였다. 또한, 본 연구에서는 폴리프로필렌 섬유보강 콘크리트의 파괴특성을 규명하기 위해 보 시편에 대한 4 점 하중 휨시험을 통해 하중-하중점 변위 곡선을 각 시편에 대해 측정하였고, 이때 COD 게이지를 이용하여 하중-CMOD 곡선도 측정할 수 있었다. 이러한 실험결과를 통해, 섬유혼입량과 초기 균열 깊이에 따른 압축강도, 휨강도 및 휨인성, 응력확대계수, 파괴에너지 등이 규명되었다. 이러한 결과에 대한 분석으로부터 Fibrillated 폴리프로필렌 섬유가 Monofilament 섬유보다 연성 효과가 큰 것을 알 수 있었으며, 특히 하중-CMOD 곡선으로부터 계산되는 파괴에너지인 Jc가 믿을만한 파괴특성 인자임을 알 수 있었다.

• Journal of Veterinary Science
• /
• 제21권1호
• /
• pp.10.1-10.12
• /
• 2020

Blood perfusion of skeletal muscle and callus was evaluated using contrast-enhanced ultrasonography (CEUS) in a canine osteotomy model to determine the applicability of CEUS in the assessment of neovascularization during fracture healing and to compare the vascular signals on CEUS between external skeletal fixation and cast-applied dogs. In 6 Beagle dogs, a simple transverse osteotomy was performed at the left tibial shaft and external skeletal fixation (n = 3) or a cast (n = 3) was applied. Radiography, power Doppler ultrasonography (power Doppler), and CEUS were performed until complete union was achieved. On CEUS, vascular changes were quantitatively evaluated by measuring peak intensity (PI) and time to PI in the soft tissue and callus and by counting the vascular signals. Vascular signals from the soft tissue were detected on power Doppler and CEUS on day 2. Significantly more vascular signals were detected by CEUS than by power Doppler. On CEUS, PI in the surrounding soft tissue was markedly increased after the fracture line appeared indistinctively changed on radiography in all dogs. In the cast-applied dogs, vascular signals from the periosteal and endosteal callus were detected on CEUS before mineralized callus was observed on radiography. CEUS was useful in assessing the vascularity of soft tissue and callus, particularly in indirect fracture healing, and provided indications of a normally healing fracture.