• 비파괴검사학회지
• /
• 제33권5호
• /
• pp.415-421
• /
• 2013

CGI는 주철보다 큰 강도 또는 작은 무게가 요구되는 응용에서 인기를 얻고 있다. 최근, 강화흑연강은 디젤 엔진 블록, 터보 하우징 및 배기 매니폴드에 사용된다. 이 논문은 873~1173 K에서 1~24 시간 동안 열화된 CGI340의 기계적 성질의 변화에 따른 음향방출 특성을 평가하였다. 연필심 파괴시험 결과에서, 탁월주파수 및 모재의 속도는 각각 97 kHz와 5,490 m/s이었다. 인장시험에서 모재는 상대적으로 높은 탁월주파수를 얻었다. 그러나 열처리된 재료, 열처리 시간이 길고, 열처리 온도가 높을수록, 낮은 주파수의 영역에서 얻어졌다. 이러한 현상은 장기간의 사용에 의해 나타난다.

• 한국터널지하공간학회 논문집
• /
• 제17권6호
• /
• pp.665-674
• /
• 2015

TSL(Thin Spray-on Liner)는 폴리머로 구성된 재료로 기존 시멘트계 숏크리트에 비해 높은 조기 강도와 시공성, 방수기능이 특징이다. TSL이 숏크리트에 비해 가장 큰 차이점은 재료의 인장력과 점착력으로 하중을 지지하는 것이다. 최근 TSL의 우수한 특성으로 인해 TSL에 대한 수요가 늘어나고 있으나 아직까지 국내에 TSL의 재료적 특성이나 평가방법이 잘 알려지지 않았다. 본 연구에서는 TSL의 특성 중 접촉면의 거동을 실내시험과 수치해석 방법을 사용하여 분석하였다. 해석결과 TSL과 암석 모델 사이의 접촉면에 점착모델과 손상 기준을 함께 적용하여 TSL의 접촉 거동을 적절히 모사할 수 있었다. 또한 접촉면의 강성이 TSL 접촉면의 초기 하중-변위 관계를 설명하여 손상 에너지가 접촉면의 수렴 수준을 결정하였다.

• Geomechanics and Engineering
• /
• 제15권4호
• /
• pp.927-935
• /
• 2018

The mechanical behavior of the brittle material samples containing the internal and edge cracks are studied under direct shear tests. It is tried to investigate the effects of stress interactions and stress intensity factors at the tips of the pre-existing cracks on the failure mechanism of the bridge areas within these cracks. The direct shear tests are carried out on more than 30 various modeled samples each containing the internal cracks (S models) and edge cracks (E models). The visual inspection and a low power microscope are used to monitor the failure mechanisms of the tested samples. The cracks initiation, propagation and coalescences are being visualized in each test and the detected failure surfaces are used to study and measure the characteristics of each surface. These investigations show that as the ratio of the crack area to the total shear surface increases the shear failure mode changes to that of the tensile. When the bridge areas are fixed, the bridge areas in between the edge cracks have less strength than those of internal cracks. However, the results of this study show that for the case of internal cracks as the bridge area is increased, the strength of the material within the bridge area is decreased. It has been shown that the failure mechanism and fracture pattern of the samples depend on the bridge areas because as the bridge area decreases the interactions between the crack tip stress fields increases.

• 한국터널지하공간학회 논문집
• /
• 제16권5호
• /
• pp.471-485
• /
• 2014

미소파괴음과 미소진동을 이용한 지반구조물 계측은 구조물 내부의 미시적 변형이나 파괴거동을 음향과 진동으로 계측하는 방법으로, 계측대상의 대규모 파괴에 앞서 이들의 발생량과 발생빈도가 급격히 증가하는 특성을 활용하여 파괴의 사전징후를 파악할 수 있다. 이 방법의 실제 적용을 위해서는 고사양의 센서, 고속의 신호획득장치 그리고 운영프로그램으로 구성된 계측시스템이 요구된다. 근래 국내기술에 의한 현장계측용 미소파괴음과 미소진동 계측시스템이 개발되었다. 특히 계측된 신호를 분석하고 해석할 수 있는 다양한 기능의 운영프로그램을 개발하고 선진외국 제품과의 상호비교를 통해 효용성을 평가하였다. 본 보고에서는 개발된 미소파괴음 계측시스템의 구성과 특징 등에 대해 소개하고, 향후 해결과제와 나아갈 방향에 대하여 논의하였다.

• 여성건강간호학회지
• /
• 제15권4호
• /
• pp.362-371
• /
• 2009

Purpose: This study was implemented to investigate the level of awareness of osteoporosis among urban women. Methods: A survey was conducted with a sample size of 434 adult females who resided in metropolises in Korea such as Seoul, Gyeonggi-do, Pusan, Gyeongsangnam-do, Kangwondo, Jeju-do and Jeollanam-do. Osteoporosis Awareness Scale was consisted of five areas with total number of 31 questions. The questionnaire's scale was 1 to 4 point, 4 point being the highest understanding level. The collected data were analyzed using descriptive statistics method. Results: The average awareness level of subjects was 2.38 and significant different depending on participants' age, education level, previous encounter with any information about osteoporosis, preventive behavior of osteoporosis, bone mineral density test, fracture history, diet control experience, and regular exercise. In osteoporosis awareness level by five areas, preventive behaviors 2.76 resulted in the highest score and characteristics of osteoporosis 2.51, bone physiology 2.46, improving bone health 2.38, and risk factors 1.80 followed respectively. Conclusion: We should implement bone health programs from a various perspective in order to raise women's osteoporosis awareness. In addition, We need follow-up studies on whether or not the increase on awareness level actually would result in changing in their behavior.

• 농촌의학ㆍ지역보건
• /
• 제18권1호
• /
• pp.93-102
• /
• 1993

The symptoms of farmer's syndrome that occurred to Korean farmers are due to the specific characteristics of Korean agriculture, and the basic reasons are poverty and less-privileged rural cultural life originated from social and political conditions. Then the purposes of this study are to investigate farmer's syndrome of farmers and to get substantial data to make a strategy that could prevent diseases. The results are as follows: 1. The most common symptom was lumbago(83.0%) among the 7 kinds of symptoms of farmer's syndrome. And it was more common among women who deliver babies and also work house chores and 10 farms than men(p<0.05). 2. The numbers of symptoms of farmer's syndrome increased as age increases and, 71.4% of those aged 70-79 complained some of the symptoms. 3. The accident rate due to agricultural machine was significantly higher in men than women(p<0.05). By frequency contusion was the most common trauma, fall, fracture were the nexts, and the age group with highest accident rate(40%) was those aged 20-29. 4. To see the significantly correlated factors between faemer's syndrome and sociodemo graphic variables, the more the numbers of family members were, the more lumbago and the less heartburn occurred. And the less gross income was the more frequent nocturnal urinary frequency occurred, and the wider the farming land was the more frequent noctural urinary frequency occurred. 5. As result of correlation coefficient between the numbers of illnesses and sociodemographic variables, the larger the family was and the larger the farming land was the more illnesses the subjects had, and those without spouses had more illnesses.

• 대한조선학회논문집
• /
• 제51권3호
• /
• pp.246-253
• /
• 2014

Liquid natural gas is stored and transported inside cargo tank which is made of specially designed cryogenic materials such as 9% Ni steel, Al5083-O alloy and SUS304 and so on. The materials have to keep excellent ductile characteristics under the cryogenic environment, down to -163oC, in order to avoid the catastrophic sudden brittle fracture during the operation condition. High manganese steel is considered to be the promising alternative material that can replace the commonly used materials mentioned above owing to its cost effectiveness. In line with this industrial need, the mechanical properties of the high manganese steel under both room and cryogenic environment were investigated in this study focused on its tensile and fatigue behavior. In terms of the tensile strength, the ultimate tensile strength of the base material of the high manganese steel was comparable to the existing cryogenic materials, but it turned out to be undermatched one when welding is involved in. The fatigue strength of the high manganese steel under room temperature was as good as other cryogenic materials, but under cryogenic environment, slightly less than others though better than Al 5083-O alloy.

• 열처리공학회지
• /
• 제13권1호
• /
• pp.1-9
• /
• 2000

The microstructural characteristics and low temperature tensile properties between $25^{\circ}C$ and $-196^{\circ}C$ for as-welded and age hardened specimen by using Al 5083-H321 for base metal, 5083-5356 and 5083-4043 weldments have been investigated. The hardness of 5083-5356 weldment decreases with aging treatment, whereas the weld region of 5083-4043 weldment shows remarkable increase in hardness after aging due to the precipitation of fine Si particle at the grain boundaries and interiors. Low temperature tensile properties of 5083 AI base metal, 5083-5356 and 5083-4043 weldments appear to be the increment of tensile strengths and elongations at the room temperature and $-196^{\circ}C$, while the decrement of tensile properties around $-50^{\circ}C$ is shown. Through the observation of fine serration to fracture in the stress-strain curve and tensile fractography, the increment of localized deformation leading to promote the neck initiation and the increment of the dimple size cause to decrease in tensile strengths and elongations around $-50^{\circ}C$. For the tensile specimen of the 5083 base metal, 5083-5356 and 5083-4043 weldments, the reason to increase in elongation after solution and aging treatment is the diminishment of fine pit, the resolution of Mg into the matrix and the spheridization of the eutectic Si.

• 비파괴검사학회지
• /
• 제21권3호
• /
• pp.261-268
• /
• 2001

열-음향방출(thermo-AE) 기법을 이용하여 두께 3mm, $[+45_6/-45_6]_s$ 복합재료 적층판의 열응력 유기 손상에 대한 비파괴평가의 유효성을 연구하였다. 반복적인 열부하 사이클에 의해서 thermo-AE 사상수가 감소하는 경향이 뚜렷하게 나타나서 열부하에 따른 카이저효과가 관찰되었다. 열부하사이클중의 thermo-AE거동을 분석하여 복합재료의 응력자유온도를 결정할 수 있었다. 초음파 C스캔, 광학현미경, 주사형 전자현미경을 통해 섬유파단과 모재파손이 관찰되었으며, 이들 파손 인자는 thermo-AE 신호의 단시간 퓨리에 변환처리에 의해 생성된 3종류의 서로 다른 시간-주파수 특성과 대응하였나 이 특성을 이용하여 복합재료의 냉각열처리 및 반복 열부하사이클시의 손상발생과정 및 내부 마찰거동 내역을 추적할 수 있었다.

• 소성∙가공
• /
• 제18권4호
• /
• pp.296-303
• /
• 2009

The effect of porosity on the high-cycle fatigue properties of Al-Si-Mg casting aluminum alloys was investigated in this study. Microstructure examination, tensile and high-cycle fatigue test were conducted on both Al-Si-Mg casted (F) and heat-treated (T6) conditions. Porosity characteristics on the fracture surfaces of fatigue-tested samples were examined using SEM and image analysis. The microstructure observation results showed that eutectic Si particles were homogeneously dispersed in the matrix of the Al-Si-Mg casting alloys, but there were porosities formed as cast defects. The high-cycle fatigue results indicated that the fatigue strength of the 356-T6 alloy was higher than that of the 356-F alloys because of the significant reduction in volume fraction of pores by heat treatment. The SEM fractography results showed that porosity affected detrimental effect on the fatigue life: 80% of all tested samples fractured as a result of porosity which acted as the main crack initiation site. It was found that fatigue life decreased as the size of the surface pore increased. A comparison was made between surface pore and inner pore for its effect on the fatigue behavior. The results showed that the fatigue strength with the inner pores was higher than that of the surface pore.