• Metals and materials international
• /
• 제24권6호
• /
• pp.1359-1368
• /
• 2018

The mechanical properties and microstructure evolution of Mg-8Li-3Al-1Y alloy undergoing different rolling processes were systematically investigated. X-ray diffraction, optical microscope, scanning electron microscopy, transmission electron microscopy as well as electron backscattered diffraction were used for tracking the microstructure evolution. Tensile testing was employed to characterize the mechanical properties. After hot rolling, the $MgLi_2Al$ precipitated in ${\beta}-Li$ matrix due to the transformation reaction: ${\beta}-Li{\rightarrow}{\beta}-Li+MgLi_2Al+{\alpha}-Mg$. As for the alloy subjected to annealed hot rolling, ${\beta}-Li$ phase was clearly recrystallized while recrystallization rarely occurred in ${\alpha}-Mg$ phase. With regard to the microstructure undergoing cold rolling, plenty of dislocations and dislocation walls were easily observed. In addition, the microstructure of alloys subjected to annealed cold rolling revealed the formation of new fresh ${\alpha}-Mg$ grains in ${\beta}-Li$ phase due to the precipitation reaction. The mechanical properties and fracture modes of Mg-8Li-3Al-1Y alloys can be effectively tuned by different rolling processes.

• 대한족부족관절학회지
• /
• 제10권1호
• /
• pp.7-10
• /
• 2006

Purpose: We analyzed the ankle bony abnormality of patients with marked ankle instability who had chronic ankle sprain more than 3 years. Materials and Methods: We evaluated the chronic ankle sprain (more than 3 years) patients with marked ankle instability tested by varus stress test and anterior draw test from March 2000 to December 2005. Eighty-nine patients (104 ankle) were evaluated and there were 38 males and 51 females. The mean age of patient at the time of diagnosis was 34.5 (range, 18 to 56 years). The average duration of morbidity was 7 years and 3 months (range, 3 years and 3 months to 21 years). The patients who had history of dislocation, fracture, malalignment, operated patients, and rheumatoid ones were excluded. Plain radiographs of AP, lateral, oblique and mortise view were checked. Results: Radilologic abnormalities were found at 74 ankles (71%) among 104 ankles. Frequent sequences of location were anterior talotibial osteophyte, medial malleolar osteophyte, Os subfibulare, lateral malleolar osteophyte. Posteior osteophyte, ankle arthritis, talar articular defect were rarely found. Conclusion: Seventy-one percent among patients with chronic ankle sprain and marked ankle instability showed more than one radiologic abnormalities. Thus, more exclusive and accurate ankle examination should be performed in these patients.

• Journal of Trauma and Injury
• /
• 제31권1호
• /
• pp.12-15
• /
• 2018

Rib fixations for flail chest or displaced rib fractures are not a new technique. However, reports on rib fixations involving costal cartilage fractures are very few and surprisingly there are no reports of internal fixations involving only the costal cartilage in the English literature. The diagnosis is difficult and the necessity of the procedure may be quite controversial. Placing plates in screws into the costal cartilage alone may seem unstable and easily dislodged or stripped through the cartilage. We report a 31-year-old male scuba diver instructor who underwent rib fixations over his 7th and 8th costal cartilage ribs for severe pain. The procedure was done with conventional plates and screws. He had the plates and screws removed 2 months later due to lingering pain, but with them removed he is now quite happy with the results without pain. The procedure for fixation of painful overlapped costal cartilage is quite simple and can be done with the usual conventional methods, fixating plate and screws directly over the cartilage alone without fixation over the bony rib.

• Clinics in Shoulder and Elbow
• /
• 제25권3호
• /
• pp.210-216
• /
• 2022

Background: Reverse shoulder arthroplasty (RSA), first introduced as a management option for cuff tear arthropathy, is now an accepted treatment for complex proximal humeral fractures. Few studies have identified whether the outcomes of RSA for shoulder trauma are comparable to those of RSA for shoulder arthritis. Methods: This is a retrospective, single-institution cohort study of all patients who underwent RSA at our institution between January 2013 and December 2019. In total, 49 patients met the inclusion criteria. As outcomes, we evaluated the 1-year American Shoulder and Elbow Surgeons (ASES) and Constant shoulder scores, postoperative shoulder range of motion, intra- and postoperative complications, and cumulative revision rate. The patients were grouped based on preoperative diagnosis to compare postoperative outcomes across two broad groups. Results: The median follow-up period was 32.8 months (interquartile range, 12.6-66.6 months). The 1-year visual analog scale, range of motion, and Constant and ASES functional scores were comparable between RSAs performed to treat shoulder trauma and that performed for arthritis. The overall complication rate was 20.4%, with patients with a preoperative diagnosis of arthritis having significantly more complications than those with a preoperative diagnosis of trauma (34.8% vs. 7.7%). Conclusions: Patients who underwent RSA due to a proximal humeral fracture or dislocation did not fare worse than those who underwent RSA for arthritis at 1 year, in terms of both functional and radiological outcomes.

• 한국안전학회지
• /
• 제9권4호
• /
• pp.29-41
• /
• 1994

High temperature tensiles tests, steady state creep tests, internal stress tests and creep rupture tests using Al 7075 alloy were performed over the temperature range of 9$0^{\circ}C$~50$0^{\circ}C$ and stress range of 0.64~17.2(kgf/$\textrm{mm}^2$) in order to investigate the creep behavior and predict creep rupture life From the apparent activation energy Qc and the applied stress exponent n measured, at the temperature range of 9$0^{\circ}C$~l2$0^{\circ}C$, the creep deformation seemed to be controlled by cross slip. On the other hand at the temperature of 20$0^{\circ}C$~23$0^{\circ}C$ the creep deformation seemed to be controlled by dislocation climb but at 47$0^{\circ}C$~50$0^{\circ}C$, by diffusion creep. And the rupture life(t$_{f}$) might be represented by anthermal process attributed to the difference of the applied stress dependence of Internal stress and the ratio of the Internal stress to the applied stress, the thermal activated process attributied to the temperature dependence of the internal stress. Also the ratio between stress dependence of primary creep rate and that of minimum creep rate was measured 0.46, the minimum creep rate is expected to be appromately obtained from master creep curve including the relationship primary creep rate and minumum creep rate. Finally the relationship new rupture parameter and logarithmic stress was represented with including the ratio between the dependence of primary creep rate and that of minimum creep rate, using the new rupture parameter the rupture life predition is exactly expected.d.

• 한국재료학회지
• /
• 제18권6호
• /
• pp.326-333
• /
• 2008

Since the 1990s, the second generation of Zirconium alloys containing main alloy compositions of Nb, Sn and Fe have been used as a replacement of Zircaloy-4 (Zr-Sn-Fe-Cr), a first-generation Zirconium alloy, to meet severe and rigorous reactor operating conditions characterized by high-burn-up, high-power and high-pH operations. In this study, the mechanical properties and creep behaviors of Zr-Sn-Fe-Cr and Zr-Nb-Sn-Fe alloys were investigated in a temperature range of $450{\sim}500^{\circ}C$ and in a stress range of $80{\sim}150\;MPa$. The mechanical testing results indicate that the yield and tensile strengths of the Zr-Nb-Sn-Fe alloy are slightly higher compared to those of Zr-Sn-Fe-Cr. This can be explained by the second phase strengthening of the $\beta$-Nb precipitates. The creep test results indicate that the stress exponent for the steady-state creep rate decreases with the increase in the applied stress. However, the stress exponent of the Zr-Sn-Fe-Cr alloy is lower than that of the Zr-Nb-Sn-Fe alloy in a relatively high stress range, whereas the creep activation energy of the former is slightly higher than that of the latter. This can be explained by the dynamic deformation aging effect caused by the interaction of dislocations with Sn substitutional atoms. A higher Sn content leads to a lower stress exponent value and higher creep activation energy.

• 대한두개안면성형외과학회지
• /
• 제12권1호
• /
• pp.33-36
• /
• 2011

Background: In a frontal sinus reconstruction, the literature primarily recommends a surgical approach for definite treatment with the exception of for anterior wall fractures with no dislocation. Many studies have assessed a range of methods for the reduction of frontal sinus fractures. This paper presents a case, in whom the anterior wall of the frontal sinus was reconstructed using an outer table calvarial bone graft in an en bloc manner. Patient and methods: A 36-year-old male visited the emergency room with a heavy injury to the forehead. He was diagnosed with fractures of the anterior and posterior wall of the frontal sinus. The neurosurgeon removed the fractured area and repaired the meninges. Afterwards, cranialization was performed and the opening of the nasofrontal duct was obstructed. After fixing the removed bone to its original location, all fragments of fractured anterior wall were purged out and the anterior wall reconstructed using an en bloc calvarial bone graft. Results: In the post-operative 8 months period, there were no complications, the round contour of the forehead was expressed well and the patient was satisfied with the result. Conclusion: There are many methods for reconstructing the anterior wall of the frontal sinus. On the other hand, in cases of large fracture sites with many fractured bone fragments, en bloc harvesting of the outer table calvarial bone could be a better choice than making use of only plates and screws because this method shows a good results in terms of aesthetics with a low complication rate.

• 한국응급구조학회지
• /
• 제11권3호
• /
• pp.139-152
• /
• 2007

Background and Purpose : Emergencies in the school setting occurs frequently. Therefore, the role of first responders is important. General teachers in elementary schools are expected by first responders in school emergencies. This study attempted to assess needs and demands assessment on the first aid education of general teachers in elementary schools. Method : The subjects of this study were 71 general teachers from 8 elementary schools. Data were collected by the questionnaire during the period from March 19 to April 13, 2007. The data were analyzed through frequency, Cronbach's ${\alpha}$, Independent Two samples t-test, paired T-test, One Way ANOVA, Pearson's Correlation by SPSS win 12.0. Result : 1. It showed that 47.9%(34 persons) of general teachers answerd that they experienced emergencies in elementary school setting. Experienced emergencies were wounds(cut, laceration, abrasion etc.) 79.4%(27 persons), bleeding(including epistaxis) 64.7%(22 person), fracture(including dislocation, sprain) 44.1%(15 person), sting or bite 29.4%(10 persons). 2. It showed that 95.8%(68 persons) of subjects answerd that first aid education are necessary. Also 91.5%(65 persons) of subjects answerd that will be educated first aid if opportunities is given. 3. The total mean showed $2.39{\pm}.40$ in necessities of first aid education and $2.17{\pm}.36$ in needs of first aid education by 3 points Likert scale. Ranking 1 in necessities and needs of first aid education was bleeding control. 4. The total mean in necessities and needs of first aid education showed statistically significant differences(t = 3.453, p = .002). 5. The necessities of first aid education showed significant positive correlations with necessities and needs of first aid education(r = .521, p = .002). Conclusion : These results suggest that education program of first aid on elementary general teachers must be developed through necessities and needs assessment of first aid education and instructors must searched methods to increase needs of first aid.

• 대한견주관절학회:학술대회논문집
• /
• 대한견주관절학회 2009년도 제17차 학술대회
• /
• pp.174-174
• /
• 2009

The acromioclavicular-hook-plate is one of the surgical treatments for distal clavicle fracture and traumatic acromioclavicular (AC) joint dislocation. Although this procedure can obtain rigid and accurate anatomical reduction of the AC joint, secondary widening of the hook-hole in the acromion is often seen during postoperative follow-up. This complication is owing to the high-degree of mobility of the AC joint. Therefore, it is important to evaluate the effect on these complications due to the position of the hook-hole. The purpose of the present study is to investigate three-dimensionally the effect due to the position of the hook-hole during arm abduction motion. We studied in vivo and three-dimensional kinematics of the normal shoulder joint with use of a markerless bone-registration technique. Magnetic resonance images of 14 shoulders of 7 healthy volunteers were acquired in 7 positions between $0^{\circ}$ and $180^{\circ}$ of abduction. We created three-dimensional computer models of the bones and the acromioclavicular-hook-plate. Based on the three-dimensional kinematics data, we simulated the widening of the hook-hole each different positioning of the hook-hole. The widths of the hook-holes almost linearly increased. And these widths significantly increased, when we put the hook-hole on the acromion from AC joint to 20 mm and 25 mm posterior position.

• Hip & pelvis
• /
• 제35권1호
• /
• pp.54-61
• /
• 2023

Purpose: The purpose was to examine the clinical and radiological outcomes after surgical treatment of acetabular fractures with total hip arthroplasty with a dual mobility cup cemented into a porous multihole cup in the population of frail elderly patients. Materials and Methods: A retrospective review of 16 patients who underwent surgery (mean age, 76.7 years) with a mean follow-up period of 36.9 months was conducted. Following surgery, patients underwent postoperative follow-up at six weeks, three, six, and 12 months and clinical and radiological examinations were performed. Results: Classification of fractures was based on the Letournel classification. Following surgery, all patients were allowed weight-bearing as tolerated immediately postoperative. Fourteen patients showed maintenance of preoperative mobility status at one year. The mean Harris hip score was 64.8 (range, 34.7-82.8) and 80.0 (range, 60.8-93.8) at three months and one year, respectively. The mortality rate was 12.5% at one year (2/16). Complications included heterotopic ossification (2/16), deep venous thrombosis (1/16), heamatoma (1/16), and femoral revision due to a Vancouver B2 fracture (1/16). No case of deep infection, dislocation, or implant loosening was reported. Conclusion: Total hip arthroplasty using a dual mobility cup cemented into a porous multihole cup with locking screws resulted in a stable construct with a capacity for immediate weight-bearing as tolerated with rapid relief of pain. The findings of this study suggest that this procedure can be regarded as a safe method that has shown promising clinical and radiological outcomes for treatment of patients with medical frailty.