• Coupled systems mechanics
• /
• 제12권2호
• /
• pp.103-125
• /
• 2023

The present research is focused on the study of plane harmonic waves in a two-dimensional orthotropic magneto-thermoelastic media with fractional order theory of generalized thermoelasticity in the light of two-temperature and rotation due to time harmonic sources. Here, we studied three types of waves namely quasi-longitudinal (QL), quasi-transverse (QTS) and quasi thermal (QT) waves. The variations in the wave properties such as phase velocity, attenuation coefficient and specific loss have been noticed with respect to frequency for the reflected waves. Further the value of amplitude ratios, energy ratios and penetration depth are computed numerically with respect to angle of incidence. The numerical simulated results are presented graphically to show the effect of fractional parameter based on its conductivity (0<α<1 for weak, α=1 for normal, 1<α≤2 for strong conductivity) on all the components.

• Structural Monitoring and Maintenance
• /
• 제6권3호
• /
• pp.191-218
• /
• 2019

The aim of the present investigation is to examine the propagation of plane waves in transversely isotropic homogeneous magneto thermoelastic rotating medium with fractional order heat transfer. It is found that, for two dimensional assumed model, there exist three types of coupled longitudinal waves (quasi-longitudinal, quasi-transverse and quasi-thermal waves). The wave characteristics such as phase velocity, attenuation coefficients, specific loss, penetration depths, energy ratios and amplitude ratios of various reflected and transmitted waves are computed and depicted graphically. The conservation of energy at the free surface is verified. The effects of rotation and fractional order parameter by varying different values are represented graphically.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.665-671
• /
• 2003

Length of an unconstrained viscoelastic damping layer on beams is determined to maximize loss factor using a numerical search method. The fractional derivative model can describe damping characteristics of the viscoelastic damping material, and is used to represent nonlinearity of complex modulus with frequencies and temperatures. Equivalent flexural rigidity of the unconstrained beam is obtained using Ross, Ungar, Kerwin(RUK) equation. The loss factors of partially covered unconstrained beam are calculated by a modal strain energy method. Optimal lengths of the unconstrained viscoelastic damping layer of beams are obtained with respect to ambient temperatures and thickness ratios of beam and damping layer.

• Journal of Electrical Engineering and Technology
• /
• 제8권2호
• /
• pp.282-287
• /
• 2013

The concentrated winding configurations offer significant advantage for reducing end windings. These machines are generally used in low speed high torque application due to relatively low copper loss. However, numbers of fractional slot construction make the designer hard to properly choose pole and slot numbers for the certain application. This paper provides the general information of possible fractional slot concentrated double layer winding machine.

• 한국소음진동공학회논문집
• /
• 제13권12호
• /
• pp.938-946
• /
• 2003

Length of an unconstrained viscoelastic damping layer on beams is determined to maximizeloss factor using a numerical search method. The fractional derivative model can describe damping characteristics of viscoelastic damping materials accurately, and is used to represent nonlinearity of complex modulus with frequencies and temperatures. Equivalent flexural rigidity of the unconstrained beam is obtained using Ross, Ungar, Kelvin[RUK] equation. The loss factors of partially covered unconstrained beam are calculated by a modal strain energy method. Optimal lengths of the unconstrained viscoelastic damping layer of beams are identified with ambient temperatures and thickness ratios of beam and damping layer by using a finite-difference-based steepest descent method.

• 대한기계학회논문집B
• /
• 제29권9호
• /
• pp.988-996
• /
• 2005

Flame structure and extinction mechanism of counterflow methane/air non-premixed flame diluted with nitrogen are studied by NASA 2.2 s drop tower experiments and two-dimensional numerical simulations with finite rate chemistry and transport properties. Extinction mechanism at low strain rate is examined through the comparison among results of microgravity experiment, 1D and 2D simulations with a finite burner diameter. A two-dimensional simulation in counterflow flame especially with a finite burner diameter is shown to be very important in explaining the importance of multidimensional effects and lateral heat loss in flame extinction, effects that cannot be understood using a one-dimensional flamelet model. Extinction mechanism at low strain rate is quite different from that at high strain rate. Low strain rate flame is extinguished initially at the outer flame edge, the flame shrinks inward, and finally is extinguished at the center. It is clarified from the overall fractional contribution by each term in energy equation to heat release rate that the contribution of radiation fraction with 1D and 2D simulations does not change so much and the overall fractional contribution is decisively attributed to radial conduction ('lateral heat loss'). The experiments by Maruta et at. can be only completely understood if multi-dimensional heat loss effects are considered. It is, as a result, verified that the turning point, which is caused only by pure radiation heat loss, has to be shifted towards much lower global strain rate in microgravity flame.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.656-661
• /
• 2005

An optimization formulation of unconstrained damping treatment on beams is proposed to minimize vibration responses using a numerical search method. The fractional derivative model is combined with RUK's equivalent stiffness approach in order to represent nonlinearity of complex modulus of damping materials with frequency and temperature. The loss factors of partially covered unconstrained beam are calculated by the modal strain energy method. Vibration responses are calculated by using the modal superposition method, and of which design sensitivity formula with respect to damping layout is derived analytically. Plugging the sensitivity formula into optimization software, we can determine optimally damping treatment region that gives minimum forced response under a given boundary condition. A numerical example shows that the proposed method is very effective in minimizing vibration responses with unconstrained damping layer treatment.

• 한국전자파학회논문지
• /
• 제15권7호
• /
• pp.677-684
• /
• 2004

본 논문에서는 X밴드용 고출력 시스템에 적합한 경사진 원형 도파관 구조를 이용한 소형 T $M_{01}$-T $E_{11}$ 모드 변환기를 제안한다. 제안된 모드 변환기는 마이크로파 에너지가 RBWO 전원으로부터 혼 안테나로 효율적으로 전송되도록 파라미터 연구를 통해 최적화된 구조로 설계되었다. 그리고 반사손실, 각 모드의 전력, 임피던스 대역폭, 그리고 모드 패턴의 시뮬레이션 결과와 측정결과를 제시하였다.다.

• 대한기계학회논문집
• /
• 제15권3호
• /
• pp.713-722
• /
• 1991

본 연구에서는 graphite/epoxy와 glass/epoxy 그리고 graphite/epoxy와 kevl- ar/epoxy의 혼합적층된 복합재료 평판의 저속충격에 대한 응답을 유한요소 모델을 사 용하여 수치해석 한후, 각각의 단일적층판들의 결과와 비교하였으며, 이때의 접촉력 관계식은 Yang과 Sun이 제안한 수정된 접촉법칙을 이용하였다. 또한, 수치해석 결과 에서의 충격자의 속도변화로써 혼합적창판 배열에 따른 에너지 흡수율을 계산하였고, 이를 충격특성이 취약한 graphite/epoxy 단일 적층판의 결과와 비교 고찰하였다.

• 대한기계학회논문집B
• /
• 제36권2호
• /
• pp.181-188
• /
• 2012

대향류확산화염의 화염소화에 있어서 에지화염 역할에 관한 실험적 연구가 진행되었다. 속도비, 버너직경, 그리고 버너간격을 변화시키며 수행된 실험에서 전체신장률에 따른 화염소화 임계질소몰분율의 그래프는 c-커브 형태로 나타났다. 고신장률화염에서는 화염소화 임계질소몰분율의 그래프가 하나의 곡선으로 일치하였으며, 화염이 일차원의 응답특성을 갖는 것을 확인하였다. 화염 소화는 바깥 에지화염이 반경방향으로의 진동 후에 화염 중심으로 수축하며 소화하는 영역, 진동 없이 화염중심으로 수축하며 소화하는 영역, 그리고 바깥 에지부분의 수축과 진동 없이 화염중심에 화염 구멍이 생기며 소화하는 영역으로 세 가지 모드로 나타났다. 화염 표면온도 측정과 에너지 방정식의 각항을 수치해석 한 결과를 토대로 에지화염부분에서의 반경방향 전도 열손실이 에지화염의 불안정을 야기한다는 것과 전도를 통한 열 공급뿐만 아니라 대류를 통한 열 공급도 바깥 에지화염의 안정화에 기여한다는 것을 보였다. 그리고 반경방향의 전도열손실이 수축하며 소화하는 메커니즘의 지배적인 역할을 함을 보였다.