• Journal of Magnetics
• /
• 제18권4호
• /
• pp.391-394
• /
• 2013

In this study, nickel-zinc ferrite nanoparticles, with the chemical formula of $Ni_{0.3}Zn_{0.7-x}Cu_xFe_2O_4$ (where x = 0.1- 0.6 by step 0.1), were fabricated by the sol-gel method. The effect of copper substitution on the phase formation and crystal structure of the sample was investigated by X-ray diffraction (XRD), thermo-gravimetry (TG), differential thermal analysis (DTA), Fourier transform infrared spectrometry (FT-IR), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The XRD result shows that due to the reduction of Zn content,the crystallite size of the sample increased. The results of the vibration sample magnetometer (VSM) exhibit an increase in saturation magnetization value (Ms) for samples with x ${\leq}$ 0.3 and a linear decrease for samples with x > 0.3. The variation of saturation magnetization and coercivity of the samples were then studied.

• 복식
• /
• 제58권9호
• /
• pp.129-141
• /
• 2008

Jikgeum(woven with supplementary golden wefts) hyungbae(rank badge) of danryung(official uniform) excavated from Im Backryung'tomb($1498{\sim}1546$) of the Joseon dynasty($1392{\sim}1910$) at Goyang, Gyunggi-Do in 2007, was in a critical condition because of serious collapse of substrate in metal thread. For conservation of hyungbae, metal thread was examined by different scientific methods(Light Microscope, Scanning Electron Microscope and Energy Dispersive X-Rray Spectrometry(SEM-EDS), Fourier Transform Infrared Spectroscopy(FT-IR)). Analytical data showed that metal thread was gilt membrane strip composed of gold leaves and proteinaceous substrate which was probably parchment. To protect collapse of substrate, 1% solution of Paraloid B-72 was infilterated into substrate for consolidation of substrate and it was adhered to warp of fabric in hyungbae, before wet cleaning. After wet cleaning, the most of the gold leaves were restored, which was confirmed by both the examination with the naked eye and the microscopic examination.

• Environmental Engineering Research
• /
• 제19권3호
• /
• pp.205-214
• /
• 2014

Petroleum a vital commodity affecting every aspect of 21st century. Toxicity and adverse effects of sulphur as catalyst in petroleum products is of great concern required development of techniques for desulphurization in compliance with the International standards. Installation of desulphurizing units costs over $200 million per unit placing economic burden on developing countries like Pakistan. Present study analysis of commercial fuels (station petrol and jet fuel JP8) on gas chromatography-mass spectrometry (GC-MS) identified sulphur concentration of 19.94 mg/L and 21.75 mg/L, respectively. This scenario urged the researcher to attempt synthesis of material that is likely to offer good adsorption capacity for sulphur. Following protocol of sol-gel method, transition metals (Ni, Cu, Zn) solution is gelated with tetraethoxysilane (TEOS; silica precursor) using glycerol. Fourier transform infrared spectroscopy (FTIR) spectra revealed bonding of Zn-O, Cu-O, and Ni-O by stretching vibrations at $468cm^{-1}$, $617cm^{-1}$, and $468cm^{-1}$, respectively. Thiophene and Benzothiophene mixed in n-heptane and benzene (4:1) for preparation of Model Fuels I and II, respectively. Each of silica based metal was applied as adsorbent in batch mode to assess the removal efficiency. Results demonstrated optimal desulphurization of more than 90% following efficacy order as Si-Ni > Si-Zn > Si-Cu based adsorbents. Proposed multilayered (Freundlich) adsorption mechanism follows ${\pi}$-complexation with pseudo secnd order kinetics.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.348-348
• /
• 2010

Behaviors of $TiO_2$-based photocatalysts with different surface structures on the removal of gas-phase toluene with and without UV irradiation are reported. P-25(Degussa) $TiO_2$ powder dispersed in distilled water by sonication was deposited on the transparent glasses and then dried. Some of the samples were further annealed in oven for 1 hr. These samples obtained before and after annealing were characterized by Brunauer- Emmett-Teller (BET), Transmission Electron Microscope (TEM), X-ray Photoelectron Spectroscopy (XPS) and Fourier Transform Infrared (FT-IR) spectrometry, respectively. Based on BET and TEM data, no significant structural change upon annealing could be identified. However, the sample without annealing showed a significantly higher ability for removing toluene both in the presence and absence of the UV light. XPS and FT-IR results clearly revealed that the population of the OH groups on the surface of $TiO_2$ was higher for the sample without annealing, indicating that the OH groups can enhance the adsorption capacity and photocatalytic activity of $TiO_2$ for the removal of the gas-phase toluene.

• Korean Journal of Chemical Engineering
• /
• 제35권12호
• /
• pp.2487-2495
• /
• 2018

Inspired by the specific amino acid sequence Asn-Pro-Ala (NPA) of water channel aquaporins (AQPs), we fabricated polyamide (PA) nanofiltration (NF) membranes by introducing reduced glutathione (GSH) in interfacial polymerization (IP) method. Fourier transform infrared spectroscopy (ATR-FTIR), X-ray photoelectron spectrometry (XPS), scanning electron microscope (SEM), atomic force microscopy (AFM), zeta potential and static water contact angle measurement were employed to characterize the chemical composition, morphology, electronegativity and hydrophilicity of the NF membranes. The water flux of GSH/PIP-TMC NF membrane reached $32.00L\;m^{-2}h^{-1}$ at 0.2 MPa, which was approximately twice than that of pristine PIP-TMC NF membrane when the ratio of GHS to piperazidine (PIP) was 40% during IP process. More water channels were built as GSH was embedded into PA layer. The fabricated NF membranes also took on potent rejection for dyes and $Na_2SO_4$. This study presents a simple and facile method to simulate water channels-based biological materials which may find potential application in water treatment.

• 한국재료학회지
• /
• 제31권6호
• /
• pp.367-374
• /
• 2021

This paper presents the characteristics of gentamicin-loaded into cetyl trimethyl ammonium intercalated montmorillonite (GtM/CTMA/Mt) as a hybrid composite for a slow-released antibacterial delivery systems. The work describes the successful immobilization of gentamicin into the interlayers of surfactant-modified montmorillonite. Physicochemical characterization of the material is carried out by means of X-ray diffraction, scanning electron microscopy, transmission electron microscopy, and Fourier transform infrared spectroscopy. The kinetics of the gentamicin release is investigated by in vitro study and analyzed based on UV-Vis spectrometry. In addition, antibacterial study is performed towards Klebsiella pneumoniae Staphylococcus aureus, Escherichia coli, and Streptococcus pyogenes. The results show that the gentamicin loading into CTMA/Mt increases the effectiveness of the antibacterial activity, as shown by the higher inhibition zone for all tested bacteria, compared to gentamicin as a positive control. The kinetics study suggests that the gentamicin release obeys the modified Korsmeyer-Peppas model. The physicochemical study and activity test demonstrate the feasibility of the GtM/CTMA/Mt for practical applications.

• 한국환경과학회:학술대회논문집
• /
• 한국환경과학회 2020년도 정기학술대회 발표논문집
• /
• pp.208-208
• /
• 2020

The aim of this study was to investigate changes in the weight of Zophobas morio larvae and mass of polystyrene foam when the larvae were fed polystyrene for 27 days. Fourier-transform infrared (FTIR) spectrometry was used to determine whether the polystyrene was broken down by the larvae. Forty Z. morio larvae (four replicates with 10 larvae per replicate) were reared in a chamber under controlled conditions with polystyrene foam blocks as their sole diet. The weight of the Z. morio larvae and mass of the polystyrene foam decreased as a function of time. The average weight of the larvae and mass of the polystyrene foam blocks decreased by 16.3 and 6.5%, respectively, over the 27-day period. The FTIR spectrum of Z. morio larvae fed with polystyrene foam did not reveal the unique peaks associated with polystyrene. In conclusion, this study suggests the possibility of using Z. morio larvae as a management technology for degrading waste plastics without a negative environmental effect. Key words : FTIR spectra, plastic biodegradation, polystyrene foam, Zophobas morio larvae.

• 한국산학기술학회논문지
• /
• 제21권10호
• /
• pp.30-39
• /
• 2020

본 연구에서는 Sol-Gel 방법을 이용하여 단일상의 Barium ferrite 분말을 제조하였으며, 이때 Ba에 대한 Fe(Fe/Ba)의 몰비와 열처리 온도를 달리하여 단일상의 Barium ferrite를 제조하기 위한 최적의 실험조건을 찾고자 하였다. 또한 고밀도 자기기록매체에 사용되기 위한 2.5 ~ 5.5 kOe 크기의 보자력을 가지는 ferrite 미립자 제조를 위해 보자력 제어에 뛰어난 효과를 지닌 cobalt를 첨가제로 하여 cobalt가 치환된 Barium ferrite 미립자를 제조하고 이들에 대한 자기적 특성 변화를 조사하였다. 제조된 Barium ferrite의 결정구조 및 단일상의 합성여부를 확인하기 위해 X-Ray Diffractometer(XRD), Thermogravimetric-Differential Thermal Analysis(TG-DTA), Field Emission Scanning Electron Microscope(FE-SEM)을 이용하여 분석하였으며, 화학적 구조와 조성의 분석을 위해 Fourier Transform Infrared Spectroscopy(FT-IR), Energy Dispersive X-Ray Spectrometer(EDS)를 사용하였다. 또한 Vibrating Sample Magnetometer(VSM)을 통해 cobalt가 치환된 Barium ferrite 분말의 보자력을 측정하였다. 그 결과 단일상의 Barium ferrite는 Fe/Ba의 몰비가 10, 900 ℃의 열처리 온도에서 가장 잘 합성되었다. Co의 첨가량이 증가할수록 보자력은 감소하였으며 Fe에 대한 Co(Co/Fe)의 몰비가 0.16 이내 일 때, 고밀도 자기기록매체에 사용할 수 있는 보자력 값인 2.5 ~ 5.5 kOe를 가지는 Barium ferrite가 합성되었다.

• Bulletin of the Korean Chemical Society
• /
• 제28권11호
• /
• pp.1985-1992
• /
• 2007

Ordered mesoporous silica (MCM-41) materials with different textural properties were prepared using alkyl (dodecyl, cetyl, eicosane) trimethyl ammonium bromide (DTAB, CTAB, ETAB, respectively) as structure directing surfactants, functionalized with amine groups and used as adsorbent for the toxic metal ions, Cr (VI), As (V), Pb (II) and Hg (II). Amino functionalization of mesoporous MCM-41 was achieved by cocondensation of N-[3-(trimethoxysilyl)-propyl] aniline with tetraethyl orthosilicate. Adsorption isotherm and adsorption capacity of the amine functionalized materials for Cr (VI), As (V), Pb (II) and Hg (II) ions were followed by inductively coupled plasma mass spectrometry (ICP-MS). Results demonstrate that amine functionalized MCM-41 prepared with ETAB showed higher adsorption capacity for Cr (VI), As (V), Pb (II) and Hg (II) ions in comparison to MCM-41 prepared with CTAB and DTAB. The higher adsorption capacity for MCM-41(ETAB) was correlated with amine content in the material (determined by CHN analysis) and relative decrease in pore volume and pore diameter. X-ray diffraction (XRD) analysis, nitrogen adsorptiondesorption measurements and Fourier Transform infrared spectrometry (FTIR) were used to follow the changes in the textural parameters and surface properties of the mesoporous materials as a result of amine functionalization to correlate with the adsorption characteristics. The adsorption process was found to depend on the pH of the medium.

• 대한치과보철학회지
• /
• 제46권6호
• /
• pp.639-643
• /
• 2008

STATEMENT OF PROBLEM: The degree of conversion may influence the ultimate mechanical and physical properties of provisional crown and fixed partial denture materials. The high levels of the unreacted residual monomer may cause deleterious effect on the properties. PURPOSE: The purpose of this study was to measure the degree of conversion of bis-acrylic based provisional crown and fixed partial denture materials by using an infrared spectroscopic method. MATERIAL AND METHODS: Chemically activated three bis-acrylic based provisional crown and fixed partial denture materials, LuxaTemp [DMG, Hamburg, Germany], fast set TemPhase [Kerr, Orange, CA, USA] and Protemp 3 Garant [3M-ESPE, St Paul, MN, USA], were investigated by Fourier transform infrared spectrometry (FTIR). The FTIR spectra of the materials tested were immediately obtained after mixing. The specimens were stored under dry conditions and at $23^{\circ}C$ for 24 hours, and then the spectra of the materials were also obtained. The degree of conversion (%) was calculated from the spectrum of the absorbance between the aliphatic double bond at 1637 $cm^{-1}$ and the aromatic double bond at 1608 $cm^{-1}$ using the baseline method. The data were statistically analyzed using one-way ANOVA and the multiple comparison Scheffe test at the significance level of 0.05. RESULTS: The mean value and standard deviation of the degree of conversion were 52.5 % ${\pm}$ 1.1 %, 50.3 % ${\pm}$ 0.8 %, and 42.3 % ${\pm}$ 4.9 % for LuxaTemp, Protemp 3 Garant and fast set TemPhase, respectively. There was no significant difference between LuxaTemp and Protemp 3 Garant, whereas there was a statistically difference between Protemp 3 Garant and fast set TemPhase, and LuxaTemp and fast set TemPhase (P < .05). CONCLUSION: The degree of conversion of fast set TemPhase was significantly lower than those of the others. The degree of conversion may be correlated with the rate of polymerization.