• 전기학회논문지
• /
• 제66권6호
• /
• pp.898-904
• /
• 2017

DFT(Discrete Fourier Transform) is one of the most widely used method to estimate the phasor of a relaying signal. The harmonics are eliminated by the DFT. However, high frequency components, except for harmonics, are not removed and cause an error in DFT-based phasor estimation process. This paper suggests high frequency noise reduction method by using a newly designed low-pass filter to estimate a signal phasor. When selecting a stop-band cut-off frequency of the low-pass filter, high frequency components generated by faults are considered. To reduce the phasor estimation delay caused by a low-pass filter, this paper proposes a low-pass filter whose settling time is reduced. An adverse effect of high frequency noise on DFT-based phasor estimation is reduced. To evaluate the performance of the proposed method, signals which are collected under a fault condition at a 345[kV] transmission system modeled by EMTP-RV are used.

• 한국통신학회논문지
• /
• 제41권2호
• /
• pp.254-262
• /
• 2016

차량용 레이더 시스템에 대한 수요가 증가함에 따라서, 상호 간섭 문제는 차량 안전을 보장하기 위해 해결해야 할 결정적인 이슈가 되었다. Frequency modulated continuous wave(FMCW) 레이더의 상호 간섭은 잡음 전력 증가의 형태로 나타나며, 이는 간섭체로 인한 타겟 검출의 실패로 이어진다. 기존의 FMCW 레이더의 주파수 추정을 위하여 사용되는 fast Fourier transform (FFT) 기법은 차량용 레이더 간섭 환경에서는 취약하다. 이러한 단점을 극복하기 위하여, 본 연구에서는 간섭환경에서 사용하기 위한 고해상도 주파수 추정 기법을 제안한다. 제안된 알고리즘의 성능을 입증하기 위하여, 77GHz 전방 감시용FMCW 레이더 시스템을 도입하였다. 제안된 기법은 간섭환경에서도 정확하게 주파수를 추정할 수 있는 multiple signal classification, estimation of signal parameters via rotational invariance techniques과 같은 고해상도 알고리즘을 이용한다. 실험결과로부터 제안된 알고리즘이 기존의 FFT 알고리즘에 비해 신호 대 간섭비 측면에서 14 dB 이상의 마진을 가짐을 확인하였다.

• 전자공학회논문지
• /
• 제53권6호
• /
• pp.167-173
• /
• 2016

압축 센싱은 기존의 섀넌/나이키스트 이론보다 낮은 샘플링률로 신호를 샘플링 하여도 원신호로 복원할 수 있다는 이론이다. 본 논문에서는 압축 센싱을 이용하여 반향 신호의 정량적 주파수 특성을 직접 추출하여 이를 이용한 초음파 감쇠 지수 예측 방법을 제안한다. 일반적인 초음파 감쇠 지수 예측 방법들은 시간 영역에서 수집된 반향 신호를 Fourier 변환 등을 통해 주파수 영역으로 변환하는데, 제안하는 예측 방법은 압축 센싱으로 수집된 데이터를 복원하는 과정에서 적용하는 basis 행렬을 이용하여 시간 영역으로의 완전한 신호 복원 없이 반향 신호의 주파수 특성을 직접 추출하여 감쇠 지수를 예측한다. 3가지의 basis 행렬을 통해 주파수 영역에서 복원된 반향 신호에 대하여 다중 참조 신호를 이용한 Centroid Downshift 방법으로 감쇠 지수를 예측하여 각각의 예측 정확도와 실행 시간을 비교 분석하였다. 컴퓨터 모의 실험 결과 이산 코사인 변환(DCT) 행렬을 적용하는 경우, 50%의 압축률에서는 압축 센싱을 적용하지 않은 경우와 0.35% 이내의 예측 정확도를 보였으며, 압축률을 70%까지 높이는 경우에도 약 6% 이내의 평균 예측 오차를 보였다. 제안한 압축 센싱을 적용한 반향 신호의 주파수 특성 추출 방법은 향후 주파수 영역의 다른 정량적 초음파 분석 방법에 적용할 수 있다.

• 대한원격탐사학회지
• /
• 제27권3호
• /
• pp.213-223
• /
• 2011

The purpose of this study is to estimate the spherical wave parameters that appears in synthetic aperture radar (SAR) image acquired over the coast of Chukk, Micronesia. The retrieval of ocean wave parameters consists of two main stages: the first is to determine the dominant wavelengths by Fast Fourier Transform (FFT) over 16 sub-image areas and the second is to estimate wave slopes and heights using dispersion relationship under various water wave conditions. It is assumed that the spherical waves are linear and progressive. These type of waves have the range and azimuth components traveling in radial directions. The azimuth travelling waves are more affected by the velocity bunching mechanism and it is difficult to estimate the wave parameters for these affected areas in SAR imagery. In order to compensate these effects, the velocity bunching ratio (VBR) based on modulation transfer function (MTF) was compared with the intensity ratio for neighbor area in the radial direction in order to assign the spherical wave properties for azimuthally travelling waves. Dispersion relation provides the good estimates for the wave heights for all the selected sub-image areas in the range of 1m to 2m. VBR based on MTF was found to be 0.78 at wave height of 1.36m, while the intensity-based VBR was 0.69 which corresponds to the height of 1.75m. It can be said that the velocity bunching accounts for azimuthally travelling spherical waves and the difference results from the sea-bottom effects.

• 한국인터넷방송통신학회논문지
• /
• 제15권4호
• /
• pp.119-125
• /
• 2015

본 논문에서는 다중 셀 MIMO (multiple-input and multiple-output) 네트워크를 위한 Hadamard 행렬 인터스트림 (interstream) 전송기반 blind 채널추정을 소개한다. 제안 방법은 다중 셀로 된 이동 단말 네트워크를 기반으로 연구된다. MS (mobile station) 는 양 셀로부터 신호를 받는 것으로 가정한다. 가까운 셀로부터 받은 신호는 원하는 신호로 간주되고, 다른 셀로부터 받은 신호는 간섭신호로 간주된다. 채널은 blind이기 때문에 채널을 추정하기 위해 Hadamard 행렬 패턴의 파일럿 (pilot) 스트림 (stream) 을 전송하면, 대규모 MIMO 채널에 대해 보다 쉽고 빠른 채널 추정이 가능하게 된다. Hadamard 행렬 기반시스템의 계산은 오직 복소 가산 (complex addition) 만 필요하기 때문에, 복소 승산 (complex multiplication) 이 필요한 Fourier 변환을 이용한 방법보다 복잡도가 훨씬 줄어든다. 수치적 분석을 통해 본 결과 제안한 방법이 완벽함을 보여준다.

• 정보과학회 논문지
• /
• 제41권12호
• /
• pp.1050-1057
• /
• 2014

뇌전도 기반의 뇌-컴퓨터 인터페이스는 향후 손 또는 발과 같은 신체를 대체하거나 사용자의 편의성을 제고하는 등의 다양한 목적으로 여러 산업에서 사용이 될 수 있는 기술이다. 본 논문에서는 경험 모드 분해와 고속푸리에 변환을 통해 동작 상상 뇌전도 신호를 분해하고 특징을 추출하는 방법을 제안한다. 뇌전도 신호 분류 과정은 다음과 같이 3단계로 구성된다. 신호 분해에서는 경험모드분해를 이용하여 뇌전도 신호에 대한 내재모드함수를 생성한다. 특징 추출에서는 파워 스펙트럼 밀도를 이용하여 생성된 내재모드함수의 주파수 대역을 확인한 뒤, 뮤파 대역을 포함하고 있는 내재모드함수에 고속푸리에 변환을 적용하여 움직임 상상에 대한 특징을 추출한다. 특징 분류에서는 서포트 벡터 머신을 사용하여 동작 상상 뇌전도 신호에 대한 특징을 분류하고, 10-교차검증을 통해 분류기의 일반화 성능을 추정한다. 제안하는 방법은 다른 방법들과 비교하여 84.50%의 분류 정확도를 보여주었다.

• Journal of Communications and Networks
• /
• 제1권3호
• /
• pp.166-181
• /
• 1999

The object of this paper is to investigate the influence of antenna pattern on indoor radio channel characteristics. Different from previous works where this analysis was carried out at a fixed frequency using different antennas, in the present paper (where measurements were taken in a wide frequency range) the variation of the radiation pattern was caused by two factors: the change of the radiation pattern when the same antenna was used at different frequenicies and the use of different type of antennas. To carry out this analysis, frequency domain measurements of the indoor radio channel at 1 GHz, 5.5 GHz, 10 GHz and 18 GHz were collected. Measurements were taken using a network analyzer. Serveral re-alizations of the channel transfer function were obtained varying, for each measurement, the positon of the transmitter and keep-ing the receiver fixed. Estimate of the channel impulse response was obtained from the Inverse Fourier Transform (IFT) of the fre-quency response. The measurements were performed in an office enviroment with mostly metallic walls and inner separations. The obtained data were elaborated to obtain the power versus distance relationship, the Cummulative Distribution Functions(CDFs) of rms Delay Spread(DS) and of the 3 dB frequency correlation band-width. Finally, the 3 dB width of the frequency correlation func-tion has been empirically related to the inverse of the rms DS of the impulse response.

• International Journal of Internet, Broadcasting and Communication
• /
• 제12권3호
• /
• pp.1-8
• /
• 2020

This paper studied a method of estimating target information using a radar in wireless communication. Position information on the target can be estimated angle, distance and velocity. The velocity information can be estimated since the Doppler frequency is changed in the moving target. The signal incident on the receiving array antenna is multiplied by the delay time and the reference signal to represent the output signal. This output signal is estimated by applying FFT (Fast Fourier Transform) after calculating signal correlation through correlation integrator. Since the output signal must be calculated within the correlator, it should be processed with the Dwell time. The correlation signal of the correlation integrator outside this Dwell time is indicated by the velocity measurement error. The FFT is applied to the signal that has passed through the correlated integrator in order to estimate the distance of the signal. The Doppler resolution must be improved because the FFT estimates target information using the Doppler information. The Doppler resolution decreases with increasing the integration time. The velocity information estimation should have no spread of the velocity. As a result of the simulation, there was no spread of the target velocity in this study.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 추계학술대회 논문집 전기설비전문위원
• /
• pp.207-210
• /
• 2008

In this paper, we researched the dielectric properties and voltage dependence on slice XLPE sheet from 22[kV] and 154[kV] power cable. We studied effects for impurities and water for semiconductor shield through a dielectric properties experiment to estimate performance of insulating materials in power cable. Capacitance and $tan{\delta}$ of 22[kV], 154[kV] were 53/43[pF] and $7.4{\times}10^{-4}$, $2.1510^{-4}$. In these results, the trend was increased with the increase of temperature. The tan6 of XLPE/semiconductor layer was increased as compared with that of XLPE. Dielectric properties reliability of tan6 was small. Also, To improve mean-life and reliability of power cable in this study, we have investigated chemical properties showing by changing the content of carbon black that is semiconductive additives for underground power transmission. Specimens were made of sheet form with the three of existing resins and the nine of specimens for measurement. Chemical properties of specimens was measured by FT-ATR (Fourier Transform Attenuated Total Reflectance). The condition of specimens was a solid sheet. We could observe functional group (C=O, carbonyl group) of specimens through FT-ATR. From these experimental result, the concentration of functional group (C=O) was high according to increasing the content of carbon black. We could know EEA was excellent more than other specimens from above experimental results.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1994년도 추계학술대회
• /
• pp.113-116
• /
• 1994

Estimation of the evoked potential using the iterated bispectrum and cross-correlation (IBC) has been tried for both simulation and real clinical data. Conventional time average (TA) method suffers from synchronization error when the latency time of the evoked potential is random, which results in poor SNR distortion in the estimation of EP waveform. Instead of EP signal average in time domain, bispectrum is used which is insensitive to time delay. The EP signal is recovered by the inverse transform of the Fourier amplitude and phase obtained from the bispectrum. The distribution of the latency time is calculated using cross-correlation between EP signal estimated by the bispectrum and the acquired signal. For the simulation. EEG noise was added to the known EP signal and the EP signal was estimated by both the conventional technique and bispectrum technique. The proposed bispectrum technique estimates EP signal more accurately than the conventional technique with respect to the maximum amplitude of a signal, full width at half maximum(FWHM). signal-to-noise-ratio, and the position of maximum peak. When applied to the real visual evoked potential(VEP) signal. bispectrum technique was able to estimate EP signal more distinctively. The distribution of the latency time may play an important role in medical diagonosis.