• 한국전자파학회논문지
• /
• 제19권9호
• /
• pp.968-977
• /
• 2008

본 논문에서는 Fourier-transform analysis와 Wiener-Hopf technique을 사용하여 병렬 슬릿에 의한 TE파 산란의 완전한 표현식을 유도하고 두 방법의 특징을 비교하고자 한다. Fourier transform analysis는 슬릿의 폭이 좁은 경우에는 빠른 수렴해를 얻을 수 있으며, Wiener-Hopf technique은 슬릿의 폭이 넓을 경우(상호 유도 결합이 적은 경우)에 매우 정확한 근사식 결과를 나타내며, 위의 두 해석 결과는 비교적 일치하는 결과들을 보여준다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2003년도 봄 학술발표회 논문집
• /
• pp.249-256
• /
• 2003

To investigate the safety and stability of the concrete lining, numerous studies have been conducted over the years and several methods have been developed. Most signal processing method of NDT techniques has based on the Fourier analysis. However, the application of Fourier analysis to analyze recorded signal shows results only in frequency domain, it is not enough to analyze transient waves precisely. In this study, a new NDT technique .using the wavelet theory was employed for the analysis of non-stationary wave propagation induced by mechanical impact in the concrete lining. The wavelet transform of transient signals provides a method for mapping the frequency spectrum as a function of time. To verify the availability of wavelet transform as a time- frequency analysis tool, model experiments have been conducted on the concrete lining model. From this study, it was found that the contour map by Wavelet transform provides more distinct results than the power spectrum by Fourier transform and it was concluded that Wavelet transform was an effective tool for the experimental analysis of dispersive waves in concrete structures.

• ETRI Journal
• /
• 제44권3호
• /
• pp.379-388
• /
• 2022

This study proposes a novel low-complexity algorithm for computing inverse fast Fourier transform (IFFT)/fast Fourier transform (FFT) operations in binary phase shift keying-modulated orthogonal frequency division multiplexing (OFDM) communication systems without requiring any twiddle factor multiplications. The peak-to-average power ratio (PAPR) reduction capacity of an efficient PAPR reduction technique, that is, H-SLM method, is evaluated using the proposed IFFT algorithm without any complex multiplications, and the impact of oversampling factor for the accurate calculation of PAPR is analyzed. The power spectral density of an OFDM signal generated using the proposed multiplierless IFFT algorithm is also examined. Moreover, the bit-error-rate performance of the H-SLM technique with the proposed IFFT/FFT algorithm is compared with the classical methods. Simulation results show that the proposed IFFT/FFT algorithm used in the H-SLM method requires no complex multiplications, thereby minimizing power consumption as well as the area of IFFT/FFT processors used in OFDM communication systems.

• 대한화학회지
• /
• 제37권4호
• /
• pp.371-377
• /
• 1993

불안정한 분자의 방출분광학에 상요이 가능하도록 Fourier Transform 분광기를 변형시켰다. 불안정한 분자 라디칼 $CH_3S$는 고전압 직류 방전에 의한 supersonic expansion 속에서 jet 형태의 흐름으로 생성되었다. Supersonic expansion에 의하여 냉각된 라디칼의 형광 스펙트럼은 Fourier Transform UV/VIS 분광기에 의해서 얻어졌다. 스펙트럼의 signal/noise 비율은 증가하였으며, 분자 라디칼 $CH_3S$의 회전구조도 명확하게 볼 수 있었다.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제16권2호
• /
• pp.110-117
• /
• 2016

Purpose: Biswas and Sarkar [11] found the availability of a system maintained through several imperfect repairs before a replacement is allowed. However they missed a part of coefficients in the integration. This paper corrects the erratum of Biswas and Sarkar [11] and performs the reliability analysis incorporating the optimal number of imperfect repairs. Methods: To find the singularities and residues of the suitable complex-valued function for the availability, the computer package Matlab is used. Also the performance measures are calculated by defining and assigning costs. Results: The accurate availability functions with respect to the numbers of imperfect repairs and the optimal number of imperfect repairs before a replacement are obtained. Conclusion: The reliability for a system under imperfect repair before a replacement is analyzed using Fourier transform technique.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(2)
• /
• pp.63-66
• /
• 2001

In this paper a binary image encryption technique and decryption system based on a joint transform correlator (JTC) are Proposed. In this method, a Fourier transform of the encrypted image is used as the encrypted data and a Fourier transform of the random phase is used as the key code. The original binary image can be reconstructed on a square law device, such as a CCD camera after the joint input is inverse Fourier transformed. The proposed encryption technique does not suffer from strong auto-correlation terms appearing in the output plane. Based on computer simulations, the proposed encryption technique and decoding system were demonstrated as adequate for optical security applications.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제51권6호
• /
• pp.272-277
• /
• 2002

This paper deals with the vibration deflection shape measurement technique for a sinusoidally excited structure using a continuously scanning laser Doppler vibrometer (CSLV). The CSLV output signal is an amplitude-modulated vibration in which the excitation signal is modulated by the deflection shapes, and thus the deflection shapes of vibration defined along a scan line can be derived by the envelop and the phase information of the CSLV output signal. In this work, a Hilbert transform based approach has been proposed for measurement of deflection shapes. This technique is as simple as the demodulation technique and allows more convenient experimental settings than the Fourier transform approach. The feasibility of the proposed technique is illustrated along with results of experiment.

• 비파괴검사학회지
• /
• 제24권6호
• /
• pp.590-596
• /
• 2004

신경망 기반의 신호 분류 시스템은 비파괴 검사 시 추출되는 많은 양의 데이터를 처리하기 위한 방법으로 꾸준히 이용되고 있다. 비파괴검사 방법 중, 초음파 탐상법은 용접 지역에서 결함들을 찾기 위하여 비파괴 검사에서 일반적으로 사용되고 있는 추세다. 초음파 탐상법의 중요한 특징은 특정 신호에서 발생하는 불연속성을 판별해내는 능력이다. 지금까지의 보편화되어 있는 기술은 신호를 분류하기 위해 각각의 A-scan 신호를 처리하는 반면 본 논문에서는 이웃하는 A-scan 신호의 정보를 기반으로 하는 2차원 푸리에 변환(Fourier transform)과 주성분 분석(principal component analysis) 기법을 이용하여 특징 벡터를 추출, 분류하는 방법을 제시하고자 한다.

• The Journal of the Acoustical Society of Korea
• /
• 제15권4E호
• /
• pp.53-57
• /
• 1996

An extension of the well-known Fourier transform is developed in this paper. It is denoted as the generalized Fourier transform(GFT), since it encompasses the Fourier transform as its special case. The first idea of this extension can be found on [1]. In the definition of the N-point discrete GFT, it first construct a passband in time which functions as a window in the time domain. An appropriate interpretation of each variables are introduced during the definition of the GFT, followed by the formal derivation of the inverse GFT. This transform pair is similar to the windowing in the frequency domain such as the subband coding technique (or filter bank approach) and could be extended to the wavelet transform.

• Food Science and Biotechnology
• /
• 제18권5호
• /
• pp.1199-1203
• /
• 2009

Melamine is a chemical intermediate to manufacture amino resins and plastics, which cannot be used as food additive since it can cause kidney stones. A qualitative determination method of melamine residue in powdered and liquid milk was developed using Fourier transform infrared (FTIR) spectroscopic technique. The calibration sets consisted of 21 standard melamine solutions, in which 1% trichloroacetic acid aqueous solution and acetonitrile (3:1, v/v) were used as solvent. The model was validated using 10 standard melamine solutions which were unused to build up the calibration set. Infrared (IR) absorbance peaks specific to almost all chemical groups in melamine molecule were shown in the spectral range between 1,100 and 1,800/cm. Combined partial least squares (PLS)-$2^{nd}$ derivative calibration model coupled with mean centering (MC) mathematical enhancement showed the highest correlation coefficients ($R^2$>0.99). In brief, the FTIR technique can be used for quantitative analysis of melamine in milk samples.