• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.1
• /
• pp.703-712
• /
• 2015

This paper proposes the UIGRP, which can tackle the problem of the network disconnection and packet transmission delay caused by turning vehicles frequently in an urban intersection. The UIGRP was designed as follows. First, it calculates the direction of vehicles using the moving direction of vehicles and the location of a destination. Second, it makes the RSU measure the density of an urban intersection. Third, the TGF Algorithm in the UIGRP decides the data transmission paths by setting as an intermediate node, not only the vehicle that is moving in the direction where a destination node is located, but also the node that has the highest density. The TGF algorithm using a moving direction and density minimizes or removes the occurrence of local maximum problems that the existing Greedy Forwarding algorithm has. Therefore, the simulation result shows that UIGRP decreases the occurrence of local maximum problems by 3 and 1 times, and the packet transmission time by 6.12 and 2.04(ms), and increases the success rate of packet transmission by 15 and 3%, compared to the existing GPSR and GPUR.

• Journal of KIISE:Information Networking
• /
• v.35 no.2
• /
• pp.120-129
• /
• 2008

The purpose of sensor network is gathering the information from sensor nodes. If there are selfish node that deliberately avoid packet forwarding to save their own energy, the sensor network has trouble to collect information smoothly. To solve this problem we suggest a mechanism which uses credit payment schema according to the amount of forwarding packets. Sensor nodes use credits to send their own message and they forward packets of other sensor nodes to get credits. To offer authenticity we combined the roles of sink node and server, also we used piggybacking not to send additional report message. The packet trace route is almost fixed because sensor node doesn't have mobility. In this case, it happens that some sensor nodes which don't receive forwarding packets therefore they can't get credit. So, we suggested the way to give more credits to these sensor nodes. Finally, we simulated the suggested mechanism to evaluate performance with ns2(network simulator). As a result, packet transmission rate was kept on a high rate and the number of arrival packets to sink node was increased. Also, we could verify that more sensor nodes live longer due to deceasing the energy consumption of sensor nodes.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.4
• /
• pp.2002-2019
• /
• 2017

RPL routing protocol for low-power and lossy networks is an Internet Engineering Task Force (IETF) recommended IPv6 based protocol for routing over Low power Lossy Networks (LLNs). RPL is proposed for networks with characteristics like small packet size, low bandwidth, low data rate, lossy wireless links and low power. RPL is a proactive routing protocol that creates a Directed Acyclic Graph (DAG) of the network topology. RPL is increasingly used for Internet of Things (IoT) which comprises of heterogeneous networks and applications. RPL proposes a single path routing strategy. The forwarding technique of RPL does not support multiple paths between source and destination. Multipath routing is an important strategy used in both sensor and ad-hoc network for performance enhancement. Multipath routing is also used to achieve multi-fold objectives including higher reliability, increase in throughput, fault tolerance, congestion mitigation and hole avoidance. In this paper, M-RPL (Multi-path extension of RPL) is proposed, which aims to provide temporary multiple paths during congestion over a single routing path. Congestion is primarily detected using buffer size and packet delivery ratio at forwarding nodes. Congestion is mitigated by creating partially disjoint multiple paths and by avoiding forwarding of packets through the congested node. Detailed simulation analysis of M-RPL against RPL in both grid and random topologies shows that M-RPL successfully mitigates congestion and it enhances overall network throughput.

• The KIPS Transactions:PartA
• /
• v.10A no.5
• /
• pp.453-462
• /
• 2003

IP address lookup of router searches and decide proper output link using destination address of IP packet that arrie into router. The IP address lookup is essential part in te development of high-speed router needed to high-speed backbone network as one of bottleneck of router performance. This paper introduces DTC data structure that can support gigabit IP address lookup by dynamic trie compression technique that just uses small memory in conventional Pentium CPU. When make a forwarding table by trie compression, the DTC can dynamically select a size of data structure with considering correlation between table's size and searching speed. Also, when compress the prefix trie, DTC makes IP address lookup on the forwarding table of a search on the high speed SRAM cache by minimizing the size of data structure reflecting the structure of the trie. In the experiment result, the DTC data structure recorded performance of maximum $12.5{\times}10^5$ LPS (lookup per second) in conventional Pentium CPU through a dynamic building of most suitable compression over variety of routing tables.

• Journal of Digital Convergence
• /
• v.15 no.8
• /
• pp.45-58
• /
• 2017

The international freight forwarders in South Korea currently have fierce competition. However, there are still a very small number of studies Korea locally and globally on the service quality of international freight forwarding industry. This study aims to extract international freight forwarders' service quality factors reflecting the characteristics of freight forwarding industry. Measures of service quality have been selected after literature review and interviews, and then surveys have been conducted on exporters and importers in Korea. The collected data has been analyzed using the exploratory factor analysis. As a result, two service quality factors of international freight forwarders have been extracted: operation characteristics factor defined as accuracy, speediness timeliness and stability, and customer orientation factor defined as professionalism and empathy. An important contribution of this study is that it presents the service quality factors reflecting the characteristics of freight forwarding industry unlike precedent studies. A future research topic is to find out which of the two service quality factors influences more on customer loyalty.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.5
• /
• pp.211-216
• /
• 2011

Networked virtual environments (NVEs) are distributed systems where geographically dispersed users interact with each other in virtual worlds by exchanging network messages. Massively Multiplayer Online Game (MMOG) is one of diverse applications where more than hundreds of users enjoy experiencing virtual worlds. A limited area called area of interest (AOI) in MMOG is reduced the load caused by message exchange between users. Voronoi-based Overlay Network (VON) is proposed to reduce the bandwidth consumption in P2P environments and Vorocast also is made using message forwarding in VON. We propose a dynamic AOI management method that solves problems such as a consistency and latency due to forwarding position updates to neighbor nodes from the message originator in forwarding scheme. Our scheme provides the consistency and reduces latency by combining direct connection scheme and Vorocast scheme compared to existing schemes. The communication between a user and users existing in center circle within AOI of the user is directly connected and the communication between the user and users existing outside the center area within AOI is using Vorocast scheme. The proposed model is evaluated through simulations.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.8
• /
• pp.1780-1784
• /
• 2015

Traditional IP routing, see only the Destination Address When Forwarding Layer 3 routing and exchange information and Destination-Based Routing Lookup is required for all Hop. Thus, all routers Full Internet routing information, the route information of more than about 120,000 may require. Therefore, the router configuration, which can be dispersed in the environment, the traffic load is required in accordance with this congestion. In this study, a unique characteristic of the Internet in the environment of an existing network Best Effect for QoS guarantee and hardware high speed switching of large multimedia data transmitted using a Labeling for forwarding a packet environment configuration is required. Video Stream Broadcast Transport Labeling rather than in much of the higher performance of the multi-step policy to most of the Video Stream Packet deulim was fixed to Labeling Header Format proposes a method of applying an effective QoS policy to a more simplified policy.

• The KIPS Transactions:PartC
• /
• v.10C no.1
• /
• pp.71-76
• /
• 2003

Internet traffic is getting tremendously heavier due to the exponential growth of the Internet users, the spread of the E-commerce and the network games. High-speed routers for fast packet forwarding are commercially available to satisfy the growing bandwidth. A high-speed router, which has the decentralized multiprocessing architecture for IP and routing functions, consists of host processors, line interfaces and switch fabrics. In this paper, we propose a software architecture tuned for high-speed non-forwarding packet manipulation. IPCMP (Inter-Processor Communication Message Protocol), which is a mechanism for IPC (Inter-Processor Communication), is also proposed and implemented as well. Proposed IPC mechanism results in faster packet-processing rate by 10% as compared to the conventional IPC mechanism using UDP/IP.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.11C
• /
• pp.1164-1170
• /
• 2002

In the ACE2000 MPLS system, MPLS Interface Module(MIM) is composed of an ATM Interface Module and a HFMA performing a packet forwarding. In the MIM, the HFMA RSAR receive cells from the Physical layer and reassemble the cells. And the IP Lookup controller perform a packet forwarding after packet classification. Forwarded packet is segmented into cells in the HFMA TSAR and transfer to the ALMA for the transmission to an ATM cell switch. When the MIM make use of an ATM Interface Module, it directly connect the ALMA with a PHY layer using the UTOPIA Level2 interface. Then, an ALMA performs Master Mode. Also, the HFMA TSAR performs the Master Mode in the MIM. Therefore, the UTOPIA-L2 Controller of the Slave Mode require for interfacing between an ALMA and a HFHA TSAR. In this paper, we implement the architecture and cell control mechanism for the UTOPIA-L2 Controller supporting Multi-ports.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.7
• /
• pp.823-828
• /
• 2012

The soft recoil mechanism was an effective mechanism for reducing the recoil force by forwarding momentum. There were some parameters such as the fire angle, firing position, and initial pressure of the recuperator, which influenced the forwarding momentum. These parameters affected the generation of the forwarding momentum in the soft recoil mechanism. To design for the mechanism, the parameters affecting momentum were studied to consider some reasonable conditions. Among the various parameters, the initial pressure of the recuperator and firing position was confirmed as a key factor to have affected the momentum. It was determined that the recoil force had a minimum value when the initial pressure of the recuperator was 180.