• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년도 제30회 춘계학술대회논문집
• /
• pp.227-230
• /
• 2008

고체 추진기관의 점화 방식은 전방 및 후방의 두가지로 나뉘어 진다. 전방 점화 방식은 점화기 작동 후 추진제 그레인 전체가 연소하기 위한 일정 압력을 노즐 마개로 유지하는 형태이다. 그러나 후방 점화 방식은 일반적으로 점화기와 마운트가 일체형으로 노즐 목에 삽입 후 조립한다. 이로 인해 마운트는 점화기 방출 에너지와 추진제 연소 압력에 의한 하중을 지지해야 한다. 본 연구에서는 연소 시험 결과 및 유한 요소 해석을 통해 후방형 점화기 마운트의 동적 거동 결과를 검증하였다.

• 한국CDE학회논문집
• /
• 제14권5호
• /
• pp.291-296
• /
• 2009

This paper presents a post-processing algorithm for 5-axis machines with three rotary axes (3R-2L type). 5-axis machining needs the postprocessor for converting cutter location (CL) data to machine control (NC) data. The existing methods for post-processing use inverse kinematics equations from for-ward kinematics. However in case of 5-axis machines with three rotary axes, the inverse kinematics equations are not induced directly since the forward kinematics equations are non-linear. In order to get the joint values from the forward kinematics equations, previous algorithms use numerical method for the post-processing, which needs searching algorithms with computation time and may result in fail. This paper proposes a geometric method for the post-processing of 3 rotary type 5-axis machines. Our algorithm has three advantages: first, it does not need establishing forward kinematics equations. Second, it is reliable method that eliminates any numerical methods for the inverse kinematics, resulting in the exact solution. Finally, the proposed algorithm can also be applied to 2R-3L type of 5-axis machines.

• 정보보호학회논문지
• /
• 제11권5호
• /
• pp.43-52
• /
• 2001

Y. Zheng은 기존의 서명 후 암호화(signature-then-encryption)기법을 기반으로하여 디지털 서명 기법과 대칭키 암호 기법을 결합시킨 signcryption이라는 새로운 기법을 제안하였다. Signcryption은 기밀성과 인증성을 동시에 만족시키면서 계산량과 통신비용을 줄여 효율성을 높인 방법이다. 또한, C. Gamage등은 대리 서명 기법과 signcryption 기법을 효율적으로 결합시킨 proxy-signcryption 기법을 제안 하였다. 그러나 이 두 기법에서 송신자의 개인키가 드러날 경우 그 개인키를 알게되는 사람은 과거에 송신자가 생성한 signcrypt된 문서를 복호화 할 수 있게된다. 즉, 기존의 signcryption 기법은 송신자의 개인키에 대한 forward secrecy의 성질을 제공하지 못한다. 본 논문서는 Zheng의 기법을 변형하여 forward secrecy를 제공하는 signcryption기법과 proxy-signcryption을 제안한다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 ICEIC The International Conference on Electronics Informations and Communications
• /
• pp.442-446
• /
• 2004

This paper propose scene change detection algorithm using coefficient of forward prediction macro-block, backward prediction macro-block, and intra-coded macro-block on getting motion estimation. Proposed method detect scene change with correlation according picture type forward two picture or forward and backward two picture on video sequences. Proposed algorithm is high accuracy and can detect all scene change on video, and detect to occur scene change on P, B, I-picture.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 ITC-CSCC -1
• /
• pp.125-128
• /
• 2000

In this paper, we derive forward link Erlang capacity reflecting both outage probability and blocking probability of each traffic type in mixed traffics environment. We firstly determine the number of available virtual trunks of the forward link from a circuit switching perspective. Then, capacity sharing model and generalized Erlang model are employed to derive joint Erlang capacity of various traffics types.

• Journal of Power Electronics
• /
• 제2권4호
• /
• pp.278-287
• /
• 2002

A novel zero-voltage and zero-current switching PWM DC-DC converter with lowered conduction losses is presented in this paper. A new double two-switch forward high frequency transformer type soft-switching converter topology is developed to minimize circulating currents occurs during freewheeling period. This converter has advantages as less number of the components, simple control principle under constant operation frequency, free of transformer Imbalance effect. The principle of operation is illustrated with steady-state analysis. Moreover, the effectiveness of the proposed converter topology is verified by implementation of a 500w-100kHz breadboard using IGBTs.

• 소성∙가공
• /
• 제9권3호
• /
• pp.242-248
• /
• 2000

This paper is concerned with the family of parts that generally feature a central hub with radial protrusions. Radial Extrusion is usually used in order to produce complex parts, which is combined with upsetting and/or forward and backward extrusion. Typical parts that fall into this category include cross pieces for universal joints, key-shaft type parts, tube fittings, and differential gears. In this paper, the forming characteristics of radial extrusion combined with forward extrusion is investigated by comparing the punch and mandrel loads. The design factors during radial extrusion combined with forward extrusion are applied to the simulation to see how much those factors have effect on the forming loads. The rigid-plastic FEM is applied to the simulation.

• 한국유체기계학회 논문집
• /
• 제9권2호
• /
• pp.25-29
• /
• 2006

Computational and experimental studies on the forward-sweep inducer for the rocket-engine turbopump are presented in comparison with the conventional backward-sweep inducer. Computational results show that back flows at the inlet decrease in the case of forward-sweep inducers compared to the back-ward inducer. Moreover, the low pressure region at the back flow is decreased, which is presumed to improve the suction performance of the inducers. Experimental results show that the suction performance of the forward-sweep inducer is almost the same as that of the backward-sweep inducer although it has smaller inlet tip diameter and shorter length. The efficiency of the forward-type inducer is found better than that of the backward-sweep inducer due to the small size of back flows.

• Physical Therapy Rehabilitation Science
• /
• 제5권4호
• /
• pp.178-184
• /
• 2016

Objective: Tension-type headache is caused by hormones, foods, irritants, stress, obesity, fatigue, and neck and head trigger points-prolonged abnormal posture. The purpose of this study was to evaluate the effects of relaxation approach on head posture, static postural stability, and headache in persons with tension-type headache. Design: Randomized controlled trial. Methods: Thirty-five persons with tension-type headache participated in this study. This study was a pretest-posttest with a control group design for a duration of 4 weeks (60 min/3 times/1 wk). The participants were randomly allocated to the relaxation approach group (n=18) and the control group with conventional rehabilitation including thermotherapy and transcutaneous electrical stimulation for the same period (n=17). Outcome measures involved forward head posture (FHP), foot pressure, neck disability index (NDI), and six-item headache impact test (HIT-6). Results: Relaxation approach and control groups improved significantly in the amount of forward head posture, neck disability index, and six-item headache impact test scores after training (p<0.05). The control group was found to be significantly different in the amount of FHP, backward foot pressure, NDI, and HIT-6 after training compared to before training (p<0.05). The relaxation approach group significantly improved in forward head posture, neck disability index, and six-item headache impact test compared with control group after training (p<0.05). Neck disability index and six-item headache impact test significantly improved after training compared with before training in the control group (p<0.05). However, the foot pressure was not significantly different between relaxation approach and control groups. Conclusions: This study suggests that treatment with relaxation approach combined with self-exercise would be effective in reducing the amount of forward head posture, neck disability and headache impacts.

• 전기전자학회논문지
• /
• 제21권1호
• /
• pp.73-76
• /
• 2017

실리콘카바이드 소자는 넓은 밴드갭을 갖는 물질로서 많은 주목을 받아왔다. 특히 4H-SiC 쇼트키 배리어 다이오드는 빠른 스위칭 속도와 낮은 순방향 전압강하의 특성으로 인해 널리 사용되고 있다. 그러나 쇼트키 배리어 다이오드의 낮은 신뢰성으로 인한 문제로 대안인 Super Barrier Rectifier(SBR)가 연구되었다. 본 논문은 4H-SiC trench-type accumulation super barrier rectifier(TASBR)를 분석하고 제안한다. 2D 시뮬레이션을 통해 본 구조는 심각한 역방향 저지전압의 감소와 누설전류의 증가가 없는 동시에 순방향 전압 강하는 21.06% 향상됨을 확인 할 수 있었다. 이러한 새로운 정류기 구조를 이용하면 전력손실이 적은 애플리케이션을 기대할 수 있다.