• Journal of Convergence for Information Technology
• /
• v.9 no.1
• /
• pp.38-44
• /
• 2019

As 4th industrial revolution era has come, autonomous driving vehiecle gets its attention for commercialization and development and thus its impact on society. To this end, several countries such as US, England and Germany are preparing their own legal systems to come up with commercialization of autonomous driving vehiecle. In this country, Korea is also developing autonomous driving vehiecle and looking forward its commercialization yet the legal system of Korea lacks of laws, regulations, rules, guidelines and so on. Hence, it is our intention to look into Korean legal system providing the analysis of current Korean legal system in detail. This paper also provides further directions to have balance between commercialization success and risk management in this country and, as a result creates a small step toward 4th industrial revolution society.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.30 no.6
• /
• pp.1053-1065
• /
• 2020

With the recent development of hardware performance and artificial intelligence technology, sophisticated fake videos that are difficult to distinguish with the human's eye are increasing. Face synthesis technology using artificial intelligence is called Deepfake, and anyone with a little programming skill and deep learning knowledge can produce sophisticated fake videos using Deepfake. A number of indiscriminate fake videos has been increased significantly, which may lead to problems such as privacy violations, fake news and fraud. Therefore, it is necessary to detect fake video clips that cannot be discriminated by a human eyes. Thus, in this paper, we propose a deep-fake detection model applied with Bidirectional Convolution LSTM and Attention Module. Unlike LSTM, which considers only the forward sequential procedure, the model proposed in this paper uses the reverse order procedure. The Attention Module is used with a Convolutional neural network model to use the characteristics of each frame for extraction. Experiments have shown that the model proposed has 93.5% accuracy and AUC is up to 50% higher than the results of pre-existing studies.

• International Journal of Computer Science & Network Security
• /
• v.22 no.4
• /
• pp.59-66
• /
• 2022

Students can successfully connect with one another thanks to the introduction of Web 2.0 and the tools and technology linked with it. The fact that rising digital tools are systematically influencing the education system is not a secret. The purpose of the research article efficiently evaluates the influence of incorporation of media in the activities of the scientific library of the higher education institution. The research Methodology is the Concepts, techniques, and procedures to effectively inculcate primary and secondary data to conduct the research effortlessly. It's worth noting that in this case, quantitative primary research was provided in the form of a survey. The researchers have proposed a survey in order to successfully instil a comprehensive view on the "incorporation of media in the operations of the scientific library of higher education institutions." As a result, fifty-one higher education institution principals were asked to attend this session. This is necessary to understand that they are both well-educated and cognizant of the impact of technology innovation on schooling. As a result, the researchers were able to gain a comprehensive view of this situation thanks to this survey. The results effectively showed that most of the participants believe that social media plays a vital role in shaping up higher education and at the same time they believe that the libraries of famous educational institutions must adapt as per the new educational trend so that teachers and students both can tap into its benefit.The practical significance of the result is manoeuvred by the efficient survey analysis and at the same time, peer-reviewed journals have been employed to put forward authentic information. Therefore, efficient insight regarding this topic has been gathered by the researchers.

• International Journal of Computer Science & Network Security
• /
• v.22 no.10
• /
• pp.374-388
• /
• 2022

Cloud computing has been one of the most critical technology in the last few decades. It has been invented for several purposes as an example meeting the user requirements and is to satisfy the needs of the user in simple ways. Since cloud computing has been invented, it had followed the traditional approaches in elasticity, which is the key characteristic of cloud computing. Elasticity is that feature in cloud computing which is seeking to meet the needs of the user's with no interruption at run time. There are traditional approaches to do elasticity which have been conducted for several years and have been done with different modelling of mathematical. Even though mathematical modellings have done a forward step in meeting the user's needs, there is still a lack in the optimisation of elasticity. To optimise the elasticity in the cloud, it could be better to benefit of Machine Learning algorithms to predict upcoming workloads and assign them to the scheduling algorithm which would achieve an excellent provision of the cloud services and would improve the Quality of Service (QoS) and save power consumption. Therefore, this paper aims to investigate the use of machine learning techniques in order to predict the workload of Physical Hosts (PH) on the cloud and their energy consumption. The environment of the cloud will be the school of computing cloud testbed (SoC) which will host the experiments. The experiments will take on real applications with different behaviours, by changing workloads over time. The results of the experiments demonstrate that our machine learning techniques used in scheduling algorithm is able to predict the workload of physical hosts (CPU utilisation) and that would contribute to reducing power consumption by scheduling the upcoming virtual machines to the lowest CPU utilisation in the environment of physical hosts. Additionally, there are a number of tools, which are used and explored in this paper, such as the WEKA tool to train the real data to explore Machine learning algorithms and the Zabbix tool to monitor the power consumption before and after scheduling the virtual machines to physical hosts. Moreover, the methodology of the paper is the agile approach that helps us in achieving our solution and managing our paper effectively.

• International Journal of Computer Science & Network Security
• /
• v.23 no.9
• /
• pp.8-16
• /
• 2023

In Japan, high-speed ground transportation service using linear motors at speeds of 500 km/h is scheduled to begin in 2027. To accommodate 5G services in trains, a subcarrier spacing frequency of 30 kHz will be used instead of the typical 15 kHz subcarrier spacing to mitigate Doppler effects in such high-speed transport. Furthermore, to increase the cell size of the 5G mobile system, multiple base station antennas will transmit identical downlink (DL) signals to form an expanded cell size along the train rails. In this situation, the forward and backward antenna signals are Doppler-shifted in opposite directions, respectively, so the receiver in the train may suffer from estimating the exact Channel Transfer Function (CTF) for demodulation. In a previously published paper, we proposed a channel estimator based on Delay and Doppler Profiler (DDP) in a 5G SISO (Single Input Single Output) environment and successfully implemented it in a signal processing simulation system. In this paper, we extend it to 2×2 MIMO (Multiple Input Multiple Output) with spatial multiplexing environment and confirm that the delay and DDP based channel estimator is also effective in 2×2 MIMO environment. Its simulation performance is compared with that of a conventional time-domain linear interpolation estimator. The simulation results show that in a 2×2 MIMO environment, the conventional channel estimator can barely achieve QPSK modulation at speeds below 100 km/h and has poor CNR performance versus SISO. The performance degradation of CNR against DDP SISO is only 6dB to 7dB. And even under severe channel conditions such as 500km/h and 8-path inverse Doppler shift environment, the error rate can be reduced by combining the error with LDPC to reduce the error rate and improve the performance in 2×2 MIMO. QPSK modulation scheme in 2×2 MIMO can be used under severe channel conditions such as 500 km/h and 8-path inverse Doppler shift environment.

• Journal of Convergence for Information Technology
• /
• v.12 no.2
• /
• pp.23-29
• /
• 2022

Recently, due to the increase in the use of Internet of Things (IoT) devices, the amount of data transmitted and processed to cloud computing servers has increased rapidly. As a result, network problems (delay, server overload and security threats) are emerging. In particular, edge computing with lower computational capabilities than cloud computing requires a lightweight authentication algorithm that can easily authenticate numerous IoT devices.In this paper, we proposed a key-agreement protocol of a lightweight algorithm that guarantees anonymity and forward and backward secrecy between IoT and edge devices. and the proposed algorithm is stable in MITM and replay attacks for edge device and IoT. As a result of comparing and analyzing the proposed key-agreement protocol with previous studies, it was shown that a lightweight protocol that can be efficiently used in IoT and edge devices.

• Nuclear Engineering and Technology
• /
• v.55 no.3
• /
• pp.884-894
• /
• 2023

Design and safety assessment of fuel pins for application in innovative Generation IV fast reactors calls for a dedicated nuclear fuel modelling and for the extension of the fuel performance code capabilities to the envisaged materials and irradiation conditions. In the INSPYRE Project, comprehensive and physics-based models for the thermal-mechanical properties of U-Pu mixed-oxide (MOX) fuels and for fission gas behaviour were developed and implemented in the European fuel performance codes GERMINAL, MACROS and TRANSURANUS. As a follow-up to the assessment of the reference code versions ("pre-INSPYRE", NET 53 (2021) 3367-3378), this work presents the integral validation and benchmark of the code versions extended in INSPYRE ("post-INSPYRE") against two pins from the SUPERFACT-1 fast reactor irradiation experiment. The post-INSPYRE simulation results are compared to the available integral and local data from post-irradiation examinations, and benchmarked on the evolution during irradiation of quantities of engineering interest (e.g., fuel central temperature, fission gas release). The comparison with the pre-INSPYRE results is reported to evaluate the impact of the novel models on the predicted pin performance. The outcome represents a step forward towards the description of fuel behaviour in fast reactor irradiation conditions, and allows the identification of the main remaining gaps.

• Convergence Security Journal
• /
• v.22 no.1
• /
• pp.81-92
• /
• 2022

The rapidly growing IoT market is expanding not only in general households but also in smart homes and smart cities. Among the major protocols used in IoT, ZigBee accounts for more than 90% of the smart home's door lock market and is mainly used in miniaturized sensor devices, so the safety of the protocol is very important. However, the device using Zig Bee is not satisfied with the omnidirectional safety because it uses a fixed key during the authentication process that connects to the network, and it has not been resolved in the recently developed ZigBee 3.0. This paper proposes a design method that provides omnidirectional safety to the ZigBee authentication protocol and can be quickly applied to existing protocols. The proposed improved ZigBee authentication protocol analyzed and applied the recently developed OWE protocol to apply ECDH, which has low computational volume and provides omnidirectional safety in IoT. Based on this, it provides the safety of the ZigBee authentication protocol, and it is expected that it will be able to provide user convenience as it does not require a separate certificate or password input.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.10
• /
• pp.93-101
• /
• 2023

In this paper, as a result of analyzing the TMIS authentication protocol using ECC and biometric information proposed by Chen-Chen in 2023, there were security problems such as user impersonation attack, man-in-the-middle attack, and user anonymity. Therefore, this paper proposes an improved authentication protocol that provides user anonymity to solve these problems. As a result of analyzing the security of the protocol proposed in this paper, it was analyzed to be secure for various attacks such as offline password guessing attack, user impersonation attack, smart-card loss attack, insider attack, perfect forward attack. It has also been shown to provided user privacy by guaranteeing user anonymity and untraceability, which must be guaranteed in TMIS. In addition, there was no significant increase in computational complexity, so the efficiency of execution time was achieved. Therefore, the proposed protocol in this paper is a suitable user authentication protocol for TMIS.

• ETRI Journal
• /
• v.37 no.1
• /
• pp.77-87
• /
• 2015

In wireless networks, cooperation is necessary for many protocols, such as routing, clock synchronization, and security. It is known that cooperator nodes suffer greatly from problems such as increasing energy consumption. Therefore, rational nodes have no incentive to cooperatively forward traffic for others. A rational node is different from a malicious node. It is a node that makes the best decision in each state (cooperate or non-cooperate). In this paper, game theory is used to analyze the cooperation between nodes. An evolutionary game has been investigated using two nodes, and their strategies have been compared to find the best one. Subsequently, two approaches, one based on a genetic algorithm (GA) and the other on learning automata (LA), are presented to incite nodes for cooperating in a noisy environment. As you will see later, the GA strategy is able to disable the effect of noise by using a big enough chromosome; however, it cannot persuade nodes to cooperate in a noisefree environment. Unlike the GA strategy, the LA strategy shows good results in a noise-free environment because it has good agreement in cooperation-based strategies in both types of environment (noise-free and noisy).