• Journal of the Korean Institute of Navigation
• /
• v.23 no.2
• /
• pp.1-9
• /
• 1999

A trailer truck is a major equipment for transporting containers, and its driving is difficult due to two degrees of freedom which exist in the joint part between truck and trailer. Especially Backing a trailer truck to a parking home is a difficult exercise for all but the most skilled truck drivers. Normal driving instincts lead to erroneous movements. When watching a truck driver backing toward a parking home, one often observes the driver backing, going forward, backing again, going forward, etc., and finally backing to the desired position along the parking home. This paper discusses the design of the controller to control the steering of a trailer truck while only backing up to a parking home from an initial position. In this paper, we propose a backing up control system for a container trailer truck using fuzzy theory where the primitive fuzzy control rules are macroscopically designed using an expert's knowledge, and the control rules are regulated by LIBL(Linguistic Instruction Based Learning) to enable to back up successfully the trailer tuck to a parking home from arbitrary initial position. The validity of the proposed parking control system is shown by applying it to some initial positions on the simulator for container trailer truck.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.18 no.1
• /
• pp.109-115
• /
• 2008

Recently, autonomous parking problems have attracted a great deal of attention and have been examined in many papers in the literature. In this paper we design a fuzzy logic based parking system which is an important part for designing an autonomous parking system. We first analysis the existed papers and design a single-input fuzzy logic system for the parking algorithm and illustrate the effectiveness of the new method via the simulation results.

• Journal of the Korean Society for Precision Engineering
• /
• v.32 no.11
• /
• pp.977-982
• /
• 2015

This study uses finite element analysis to evaluate the forming load of tool entrance angle of the cold forward extrusion molding process of helical gear; this can replace the spur gear applied to the Electronic Parking Brake (EPB) system. A cold forging process is often used in the automobile industry as well as in various industrial machines due to its high efficiency. Finite element analysis is frequently used when interpreting results of the forging process. Formality was evaluated by calculating tooth profile filling rate of helical gear. Change in required forming load was investigated when the entrance angle of forward extrusion tool die was changed from $30^{\circ}$ to $60^{\circ}$, also by finite element analysis. We suggest suitable tool entrance angles.

• The Journal of Korea Robotics Society
• /
• v.15 no.2
• /
• pp.147-159
• /
• 2020

Over the last years, a number of different path following methods for the autonomous parking system have been proposed for tracking planned paths. However, it is difficult to find a study comparing path following methods for a short path length with large curvature such as a parking path. In this paper, we conduct a comparative study of the path following methods for perpendicular parking. By using Monte-Carlo simulation, we determine the optimal parameters of each controller and analyze the performance of the path following. In addition, we consider the path following error occurred at the switching point where forward and reverse paths are switched. To address this error, we conduct the comparative study of the path following methods with the one thousand switching points generated by the Monte-Carlo method. The performance of each controller is analyzed using the V-rep simulator. With the simulation results, this paper provides a deep discussion about the effectiveness and limitations of each algorithm.

• Journal of Power System Engineering
• /
• v.16 no.2
• /
• pp.5-10
• /
• 2012

The parking brake is one of the essential units embedded in track driving motor for forward and backward motion of an excavator. It is composed of multi-friction discs. When the hydraulic motor stops, the multi-friction discs closely stick to the facing discs by acting of multi-spring forces. So, the friction forces generate the braking force by compressing the cylinder barrel of hydraulic motor. In this study, we combined the multi-friction discs to two kinds of spring which have different spring force, and the maximum torque measured at the rotational starting point of hydraulic motor through gradually increasing the rotational torque of load side hydraulic motor by use of 1 and 2 sheets of friction plates. And, under this experimental condition, the maximum coefficient of static friction and the characteristics of paper friction sheet were analyzed. The obtained experimental results will be applied to the design of parking brake system for producing large size excavator in the 85-ton weight class.

• Tribology and Lubricants
• /
• v.29 no.1
• /
• pp.1-6
• /
• 2013

Hydraulic transmission is the main component delivering power to the drive wheels of an excavator during forward and backward movement, and it has low speed, high torque and high speed, low torque gear change ratios as a forward/backward two-speed main function. It also has additional function of ensuring that the excavator is stably fixed on the ground with the built-in parking brake during excavation operations. In this study, optimal design specifications are determined by modeling and simulating about the multi-disc-type friction clutch, which is the main component improving the reliability of the hydraulic transmission for a 14-ton wheel excavator, and the friction properties of the transmission clutch are analyzed by performing sample tests.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.2
• /
• pp.231-238
• /
• 1993

A rules of fuzzy control is to represent an expert‘s and engineer‘s ambiguous control knowledge of system with some lingustic rules. This rule is very difficult to represent perfectly because expert‘s knowledge is not precise and the rule is not perfect. We propose the fuzzy reasoning and learning to upgrade precision of imperfect rules successively after system running. In the proposed method, the precision of the backward part of a fuzzy rule is improved by back propagation learning method. Also, the method reasons the compatibility degree of the forward part of fuzzy rule by associative memory method. This method this is successfully applied to design auto-parking fuzzy controller in which expert‘s technology and knowledge are required in the limited area.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.18 no.1
• /
• pp.64-88
• /
• 2024

Security and reliability are the utmost importance facts in intelligent networked vehicles. Stochastic Petri Net and Z (SPZN) as an excellent formal verification tool for modeling concurrent systems, can effectively handles concurrent operations within a system, establishes relationships among components, and conducts verification and reasoning to ensure the system's safety and reliability in practical applications. However, the application of a system with numerous nodes to Petri Net often leads to the issue of state explosion. To tackle these challenges, a refinement and abstraction method based on SPZN is proposed in this paper. This approach can not only refine and abstract the Stochastic Petri Net but also establish a corresponding relationship with the Z language. In determining the implementation rate of transitions in Stochastic Petri Net, we employ the interval average and weighted average method, which significantly reduces the time and space complexity compared to alternative techniques and is suitable for expert systems at various levels. This reduction facilitates subsequent comprehensive system analysis and module analysis. Furthermore, by analyzing the properties of Markov Chain isomorphism in the case study, recommendations for minimizing system risks in the application of intelligent parking within the intelligent networked vehicle system can be put forward.

• Journal of Auto-vehicle Safety Association
• /
• v.10 no.3
• /
• pp.32-37
• /
• 2018

Recently, the driver can be assisted by the advanced active safety devices such as ADAS from road traffic risks. With this system, driver and passenger may freed from can driving tasks or kept eyes on forward direction while on the road. Help from adoptive cruise control, auto parking and newly develped automated driving vehicles technologies, the driver positions will vary significantly from the current standard driver position during the travel time. On this hypothesis, the objective of this study is analyze the behavior and injuries of drivers in the event of frontal impact under these abnormal driver position. Based on the KNCAP frontal impact testing method, this simulation matrix was set-up with dummies of 5 th tile female Hybrid III dummy and 50 th tile male Hybrid III dummy. The small sedan type passenger car was modeled in this simulation. The series of simulation was performed to compare the injuries and behaviour of each dummy, varying the seating status and seat position of each dummy.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.40 no.1
• /
• pp.65-73
• /
• 2022

This paper analyzed the characteristics of ancient villages in Hongcun and the method of resetting the preservation area for the preservation of the changed historical and cultural space in Hongcun through the process of change. To this end, the current status of preservation areas and utilization areas in the village was identified through ancient documents, old paintings, policy materials, and interviews related to the village, and through this, the problem of resetting the preservation area was examined. As a result, the following conclusions were drawn. First, Hongcun is a village built under the influence of Confucianism, Buddhism, and Taoism, and the spatial organization was created according to the hierarchy of Confucianism. As a result, it was possible to inherit and preserve the heritage of ancestors even though the central government did not preserve it. Second, the concept of preservation in a limited sense has been applied as Hongcun has been recognized as a cultural heritage that has been passed down since ancient times, but the Great Leap Forward and the Cultural Revolution brought about changes in the village space. Since then, ancient buildings, water systems, and forests have been preserved through regulations on new construction and expansion of a building with the Hongchon preservation plan, but the development within the preservation area is underway due to changes in the lives of original inhabitants, which were followed by continued development pressure and reform and opening. Third, the original inhabitant of ancient villages had a high perception of the value of the heritage, but they demanded the preparation of measures to improve living conditions and create profits, and the active use of villages for this. Fourth, the forest consisting of old trees is being restored, but the gardens in the old house are showing a phenomenon that the garden space is reduced or transformed for use. The bridges and parking lots were newly built in the southern area, which was extended from the western area, the original entrance to the ancient village, resulting in changes in the existing entrance. This was found to be the primary cause of the spatial change of the ancient village, as the road system was modified to make it convenient for tourists to enter and exit. Fifth, the existing preservation area should be reset and preserved by resetting the preservation route centered on Wolso(half Moon Pool), while the surrounding area should be set as a direct and indirect experience space, and according to the hierarchy of each space, the utilization should proceed while the preservation is carried out by crossing the preservation and the utilization.