• 한국운동역학회지
• /
• 제23권3호
• /
• pp.209-218
• /
• 2013

This study was to perform the kinetic analysis of forward $1\frac{1}{2}$ somersault on the platform diving. Six men's diving players of the Korea national reserve athletes participated in this study. The variables were analyzed response time, velocity, center of mass (COM), angle, center of pressure (COP) and ground reaction force (GRF) of motion. For measure and analysis of this study, used to synchronized to 4 camcorder and 1 force plate, used to the Kwon3D XP (Ver. 4.0, Visol, Korea) and Kwon GRF (Ver. 2.0, Visol, Korea) for analyzed of variables. The results were as follows; Time factor were observed in maximum knee flexion depending on the extent of use at phase 1 of take-off to execute the somersault. This enabled the subject to secure the highest possible body position in space at the moment of jumping to execute the somersault and prepare for the entry into the water with more ease. Regarding the displacement of COM, all subjects showed rightward movement in the lateral displacement during technical execution. Changes in forward and downward movements were observed in the horizontal and vertical displacements, respectively. In terms of angular shift, the shoulder joint angle tended to decrease on average, and the elbow joints showed gradually increasing angles. This finding can be explained by the shift of the coordinate points of body segments around the rotational axis in order to execute the half-bending movement that can be implemented by pulling the lower limb segments toward the trunk using the upper limb segments. The hip joint angles gradually decreased; this accelerated the rotational movement by narrowing the distance to the trunk. Movement-specific shifts in the COP occurred in the front of and vertical directions. Regarding the changes in GRF, which is influenced by the strong compressive load exerted by the supporting feet, efficient aerial movements were executed through a vertical jump, with no energy lost to the lateral GRF.

• 한국ITS학회 논문지
• /
• 제20권2호
• /
• pp.43-57
• /
• 2021

자율주행의 핵심기술인 첨단 운전자 지원 시스템(Advanced Driver Assistance Systems) 중 대표기술인 전방충돌경보(Forward Collision Warning)를 대상기술로 선정하여, 주행시뮬레이션 실험 기반의 교통사고 예방효과를 추정하였다. 효과척도로 ①인지반응시간(s) ②감속도(m/s2) ③충돌여부(회)로 선정하여, 전방충돌경보 미설치시와 설치시의 변화량 측정하였다. 실험 시나리오는 운전자 전방의 차량의 급정거하는 시나리오(1)과 옆차로에서 차량이 끼어드는 시나리오(2)를 진행하였으며, 주간/야간으로 구분하였다. 분석결과, 전방충돌경보장치를 설치하였을 경우, 인지반응시간(s)이 감소하였으며, 감속도(m/s2)는 감소하였다. 운전자의 위험상황을 빠르게 감지하여 여유로운 감속을 할 수 있게 되었으며, 그에 따른 전방충돌횟수도 감소한 것으로 분석되었다. 향후 운전자의 운전성향을 반영하고 실험 시나리오를 다양화하면, ADAS의 설치효과를 증대시키고 다른 기술의 효과추정에도 활용될 수 있을 것이다.

• 한국항공우주학회지
• /
• 제33권2호
• /
• pp.22-31
• /
• 2005

본 연구에서는 회전익 항공기의 수직 이/착륙 성능과 고정익 항공기의 고속/고효율 순항 비행 성능을 모두 가지는 Canard Rotor/Wing 항공기 최적 형상설계를 수행하였다. CRW 항공기의 특징인 로터/날개 가변 방식과 로터 회전 시 팁 제트를 통하여 회전력을 얻는 점 때문에 기존의 회전익 또는 고정익 사이징 프로그램만으로는 바로 적용이 어렵고 Reaction Driven 로터에 대한 해석 모듈의 추가와 회전익/고정익 비행 모드 해석이 혼합되어야 한다. 따라서 기존의 사이징 프로그램을 바탕으로 로터 성능, 덕트 유동, 엔진 유동 해석 코드를 연결하여 Reaction Driven 로터 성능 해석이 가능하게 하였으며, 비행체 외형상 특징과 임무별 비행특징이 반영되도록 사이징 프로그램을 개발하였다. 1500 lbs급 소형 무인기에 대하여 비행체 사이징을 수행하고 성능에 크게 영향을 미치는 설계변수를 파악하여 최적화 문제를 구성하였고 전역적 최적화 기법을 이용하여 최소 중량을 가지는 CRW 항공기의 최적형상을 도출하였다.

• Journal of Biosystems Engineering
• /
• 제39권1호
• /
• pp.11-20
• /
• 2014

Purpose: Walking type cultivator used for weeding generated excessive handle vibration as well as bouncing motion depending on the weeding speed. This research was conducted to define a design factor of the rotary weeding blades for reducing soil reaction forces as well as hand vibration. Methods: The motion and forces acting on the rotary blades were reviewed to find out the most influencing parameter on hand vibration. The installation angle (IA) of the blade was selected and analyzed to determine the condition of no reaction force less. For removing the unnecessary upward soil reaction, the design factor theory of weeding blade was suggested based on geometrics and dynamics. For evaluation of design factor theory, the experiment in situ was performed base on ISO 5349:1. The vibration $a_{hv}$ and theoretical value $X_{MF}$ were compared with two groups that one was positive group ($X_{MF}$ > 0) and the other was negative group ($X_{MF}$ < 0). Results: $X_{MF}$ was derived from rotational velocity, forward velocity, disk diameter, weeding depth, blade's width and IA of blade. Two groups had significant difference (p < 0.05). In aspect of the group mean total exposure duration, positive group was 17.53% bigger than negative group. When disk radius 100, 150 and 200 mm, minimum IAs were $4{\sim}27^{\circ}$, $3{\sim}15^{\circ}$ and $2{\sim}10^{\circ}$, respectively. A spread sheet program which calculated XMF was developed by Excel 2013. Conclusions: According to this result, minimum IA of weeding blade for soil reaction reduction could be obtained. For reduction hand-arm vibration and power consumption, minimum IA is needed.

• 대한화학회지
• /
• 제20권3호
• /
• pp.193-197
• /
• 1976

界面活性劑 dodecyl pyridinium chloride 水溶液에서의 超音波吸收를 $20^{\circ}C$, 振動數 0.1${\sim}$90 Mc에서 測定하였다. 超過吸收는 cmc 以上의 濃度에서만 觀測되었다. 超音波超過吸收의 메카니즘은 $M_2\;{\rightleftharpoons}\;M_1\;＋\;1.2Cl^-$ 反應에 基因됨을 알았다. 여기서 $M_2,\;M_1$은 다른型의 미셀이다. 정, 逆反應速度常數는 각각 $6.6{\times}10^5 sec^{-1},\;2.7{\times}10^11sec^{-1}mol^{-1.2}$임이 觀測되었다. 自由에너지, 엔탈피, 엔트로피등 몇가지 反應速度論的性質도 算出하였다.

• 한국운동역학회지
• /
• 제20권1호
• /
• pp.49-55
• /
• 2010

The purpose of the study was to analyze kinetic factors required to the three-point jump shot of the basketball games through 3-D analysis and ground reaction force(GRF) analysis. Six university male players participated in this study. The results of the study were showed that (1) resultant velocity in the center of mass(COM) was $0.84{\pm}0.27\;m/s$ since a player didn't shot a ball in the highest peak and shot ball at the moment of going up forward and vertical movement. Therefore, it is necessary to find a proper timing to shot a ball; (2) the angular velocity was largely increased in upper arm and fore arm out of the upper-limb segments and the hands had the largest angular velocity since the body is in a fixed situation and angular speed is rapidly increased by the wrist' snap with the rapid movement of upper arm and forearm at the time of release a ball; (3) it is judged that a player can shot a ball at the accurate and high release point when the player collects power vertically to the maximum by keeping GRF to the right and the rear in a proper way and by keeping the body's balance so that a large power may not be dispersed.

• Journal of Microbiology and Biotechnology
• /
• 제17권4호
• /
• pp.685-690
• /
• 2007

The deoxysugar biosynthetic gene cluster of Sch 47554/Sch 47555 was cloned from Streptomyces sp. SCC-2136. One of the ORFs, schS6, appeared to encode glucose-1-phosphate thymidylyltransferase, which converts dTTP and glucose-1-phosphate to TDP-D-glucose and pyrophosphate. The dTDP-D-glucose is a key metabolite in prokaryotics as a precursor for a large number of modified deoxysugars, and these deoxysugars are a maj or part of various antibiotics, ranging from glycosides to macrolides. SchS6 was expressed in E. coli vector pSCHS6 and the expressed protein was purified to apparent homogeneity by ammonium sulfate precipitation and Ni-NTA affinity column chromatography. The specific activity of the purified enzyme increased 4.7-fold with 17.5% recovery. It migrated as a single band on SDS-PAGE with an apparent molecular mass of 56kDa. The purified protein showed glucose-1-phosphate thymidylyltransferase activity, catalyzing a reversible bimolecular group transfer reaction. In the forward reaction, the highest activity was obtained with combination of dTTP and ${\alpha}-D-glucose-1-phosphate$, and only 12% of that activity was obtained with the substrates $UTP/{\alpha}-D-glucose-1-phosphate$. In the opposite direction, the purified protein was highly specific for dTDP-D-glucose and pyrophosphate.

• Structural Engineering and Mechanics
• /
• 제66권2호
• /
• pp.249-262
• /
• 2018

In this paper, reaction of functionally graded (FG) thick nanoplates resting on a viscoelastic foundation to a moving nanoparticle/load is investigated. Nanoplate is assumed to be thick by using second order shear deformation theory and small-scale effects are taken into account in the framework of Eringen's nonlocal theory. Material properties are varied through the thickness using FG models by having power-law, sigmoid and exponential functions for material changes. FG nanoplate is assumed to be on a viscoelastic medium which is modeled using Kelvin-Voight viscoelastic model. Galerkin, state space and fourth-order Runge-Kutta methods are employed to solve the governing equations. A comprehensive parametric study is presetned to show the influence of different parameters on mechanical behavior of the system. It is shown that material variation in conjunction with nonlocal term have a significant effect on the dynamic deformation of nanoplate which could be used in comprehending and designing more efficient nanostructures. Moreover, it is shown that having a viscoelastic medium could play an important role in decreasing these dynamic deformations. With respect to the fresh studies on moving atoms, molecules, cells, nanocars, nanotrims and point loads on different nanosctructures using scanning tunneling microscopes (STM) and atomic force microscopes (AFM), this study could be a step forward in understanding, predicting and controlling such kind of behaviors by showing the influence of the moving path, velocity etc. on dynamic reaction of the plate.

• Bulletin of the Korean Chemical Society
• /
• 제6권4호
• /
• pp.196-202
• /
• 1985

A Very Low Pressure Reactor (VLPR) is constructed for the kinetic study of atom-molecule bimolecular elementary reactions. The basic principles and the versatility of the method are described. By using the VLPR technique the forward (k1) and the reverse (k-1) rate constants for Br atom reaction with trimethylsilane are studied; Br + $(CH_3)_3$SiH k1 ${\leftrightarrow}$ k-1 HBr + $(CH_3)_3$Si. From the kinetic data and the entropy estimation the bond dissociation energy for Si-H bond in trimethylsilane is calculated to be 90.1 kcal/mole $({\pm}1.1$ kcal/mole). The Arrhenius parameters for k1 are found to be log A = 10.6 l/mole·sec, $E_a$ = 4.4 kcal/mole respectively. For the comparison purpose analogous reaction for carbon compound ; Br + $(CH_3)_3$CH ${\rightarrow}$ HBr + $(CH_3)_3$C was also studied. The corresponding rate constant and equilibrium constant at $25^{\circ}C$ are found to be 2.67 ${\times}$ $10^6l$/mole${\cdot}$sec and 160 respectively.

• 디자인학연구
• /
• 제15권1호
• /
• pp.369-388
• /
• 2002

변천을 거듭하고 있는 21세기는 인류의 정신적 개성과 자유를 마음껏 누릴 수 있는 세상을 만들어 가고 있다. 이에 부응하여 디자인은 이제 하드웨어적이고 최종 결과물을 포장하는 위치에서 소프트웨어적이며 원인제공을 할 수 있는 시작의 위치로 전환을 가져와야 할 것이다. 왜냐하면 현대와 같은 발전된 사회를 살아가는 사람들에게는 무순서, 다차원적으로 각종 사물과 정보가 수없이 접하게 되기 때문이다. 따라서 이러한 수많은 사물과 정보를 보다 효과적인 활용능력에 있어서 귀인반응은, 고유의 특성에 대한 사실을 지각하고 인지하여 받아들인 정보를 이미지로 향상화하였을 때, 의미의 전달에 있어서 보다 큰 효과를 가져올 수 있다는 의미에서 디자인에 있어서 귀인적 반응이 미치는 영향은 크다고 할 수 있다. 따라서 본 연구는 사물형태가 사용자에게 인지되기 어려운 형태라고 가정하고, 40대와 50대가 그 제품의 형태를 점하였을 때 나타나는 반응 혹은 태도는 이전에 경험하였던 사물형태의 정보 량이며, 새로운 제품을 접했을 때 부정적 태도를 가지게 될것이다라는 가설과 함께 인간의 귀인본능과 형태에 대한 귀인반응의 유형 그리고 사물에 대한 귀인과정을 이론적으로 비교, 고찰하여 디자인에 있어서의 원인추론을 정의하였다. 둘째, 사물이 인지되는 디자인된 제품을 사례를 들어 제품형태에 있어서의 느껴지는 것이 무엇인가에 대한 주관적인 평가반응과 귀인요인에 대한 의미유발의 분석 그리고 형태간의 관계성을 문헌을 통해 정리하였고, 실험을 통하여 귀인반응에 대한 요소를 추출하여 디자인된 제품에 어떤 영향을 주는가를 분석, 정의하였다. 끝으로 결론과 아울러 디자인 접근 방법에 대한 모형을 제시하고 앞으로의 활용가능성과 향후과제를 제시하였다.