• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1999.10a
• /
• pp.403-410
• /
• 1999

General1y, H-section is used for columns and beams in the middle and low steel building, But it has a strong and weak axis. Thus if H-section is used for columns, the structure needs reinforcement on the weak axis. Therefore recently, square holler section(S.H.S) is used for columns because it is able to coiler the vulnerability of H-section. Structural analysis is usually executed under the assumption that connections are either ideally pinned joint or fully rigid joint. Actually all connections are semi-rigid which possess a rotational stiffness. Therefore it can be designed economically as using the property of connections which has a rotational stiffness. This paper presents a prediction model curve which is fitted Kishi-Chen power Model about the behavior of connection between H-beam and S.H.S column. Non-linear analysis program was considered the non-linearity of semi-rigid connection and the geometrical non-linearity under the effect of axial force. It was programed by FORTRAN90 and Visual Basic.

• Journal of the Korean Institute of Navigation
• /
• v.10 no.2
• /
• pp.57-81
• /
• 1986

The conventional school affairs management, with an example of Korea Martitime University (KMU), is studied through the university codes and its internal regulations and the inevitable problems of the conventional school affairs are analyzed. From the view points of complexity of the educational structure and increase in educational population, the computerized school affairs management is increasingly requested. Therefore, in order to design and implement a computerized school affairs management system, a code-system suitable for the KMU is, first of all, constructed and then a data base which copes with various reforms or changes is developed by using the code system and the IMAGE/DMBS of a HP-9040AM computer. A FORTRAN example program shows that the designed data base can be easily transformed into on-line system and made good use of managing school affairs. Furthermore, it is recommended that the university authority organize a research team for designing the total system in future university administration and solving difficult problems occurring through the computerization.

• Proceedings of the KIEE Conference
• /
• 1998.07c
• /
• pp.923-925
• /
• 1998

Electric arc furnaces (EAFs) are a main cause of voltage flicker due to the interaction of the high demand currents of the load with the supply system impedance. The stochastic models have described the physical phenomena of EAFs. An alternative approach is to include deterministic chaos in the characterization of the arc currents. In this paper, a chaotic approach to such modeling is described and justified. At the same time, a DLL (Dynamic Link Library) module, which is a FORTRAN interface with TACS (Transient Analysis of Control Systems), is developed to implement the chaotic load model in the Electromagnetic Transients Program (EMTP). The details of the module and the results of tests performed on the module to verify the model and to illustrate its capabilities are presented in this paper.

• Steel and Composite Structures
• /
• v.13 no.3
• /
• pp.207-223
• /
• 2012

This paper deals with critical thermal buckling load optimization of symmetrically laminated four layered angle-ply plates with one or two different intermediate line supports. The design objective is the maximization of the critical thermal buckling load and a design variable is the fibre orientation in the layers. The first order shear deformation theory and nine-node isoparametric finite element model are used for the finite element solution of the laminates. The modified feasible direction (MFD) method is used for the optimization routine. For this purpose, a program based on FORTRAN is used. Finally, the numerical analysis is carried out to investigate the effects of location of the internal line supports, plate aspect ratios and boundary conditions on the optimal designs and the results are compared.

• Journal of Industrial Technology
• /
• v.27 no.B
• /
• pp.65-70
• /
• 2007

The LNG tank are properly designed to fit with the limited installation space of a light duty truck, Hyundai Porter II. This designed LNG tank has 36 liter capacity, so two LNG tanks installed on Porter II truck allow it to run about 432 km per fueling. It is almost two times greater than CNG mileage for same truck. To analyze the relationship between car acceleration and heat leak for different fuel vapor/liquid ratios, the modified Fortran program "Pro-Heatleak" is used. Computational analysis shows that the relationship between the heat leak and vapor/liquid ratio is linearly inversed. Heat leak increases with increasing of car acceleration when fuel vapor/liquid ratio is less than 0.5 and decreases when fuel vapor/liquid ratio is greater than 0.5. The difference between maximum and minimum heat leak for full tank is about 12 percents. For the fuel vapor/liquid ratio equal to 0.5 heat leak does not depend on car acceleration.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.444-445
• /
• 2006

Flying trajectories of fine particles within a size range of $10{\sim}60{\mu}m$ were studied during centrifugal atomizing processes. A FORTRAN program was written by using increment method. Calculation results revealed that the drag force might reach very high value of 522-7800 g for fine powder of $10{\sim}60{\mu}m$. Flying distance in horizontal direction could be shortened if the particles fly obliquely due to the huge drug force. On the other hand, very fine powder could be projected to far distances when the atmosphere flow velocity is much stronger. Fortunately such particles could be contracted within a cylinder closed to the atomizer when the atmosphere flow was weaken or retained in a limited diameter.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.52 no.6
• /
• pp.75-83
• /
• 2010

The objective of this paper is to study the discharge characteristics of pollutant loads in small watershed according to probability rainfall using the Hydrologic Simulation Program-Fortran (WinHSPF). The subwatershed of Gosam reservoir watershed in Gyeonggido province was simulated and the probability rainfall of study area was estimated by recurrence interval and duration. The probability rainfalls are 156.5, 205.9 and 277.4 mm for 6 hrs, 12 hrs and 24 hrs in 10 year frequency, and each probability rainfalls is distributed by Huff's 4th quantiles method and applied to HSPF. The pollutant loads were high for initial rainfall. The concentrations of TN, TP and BOD were high as rainfall duration is shorter and rainfall intensity is higher.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.55 no.4
• /
• pp.13-20
• /
• 2013

The purpose of this study was to evaluate the applicability of the HSPEXP expert system for the calibration of the Hydrological Simulation Program - Fortran (HSPF) for the study watershed. HSPEXP offers advice to the modeler, suggesting parameter changes that might result in better representation of a river basin and provides explanations supporting the recommended parameter changes. The study watershed, Sancheong, is located within the Nakdong River Basin and having the size of $1,072.4km^2$. Input data for the HSPF model were obtained from the landuse map, digital elevation map, meteorological data and others. Water flow data from 2006 to 2008 were used for calibration and from 2009 to 2010 were for validation. Using the HSPEXP expert system, hydrological parameters were adjusted based on total volume, then low flows, storm flows, and finally seasonal flows. For the calibration and validation period, all the HSPEXP model performance criteria were satisfied.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.2000-2001
• /
• 2007

Wind power generation system based on the PSCAD/EMTD is proposed in this paper for the simulations under the real weather conditions. Real field data of weather condition is interfaced to PSCAD/EMTDC using Fortran program interfaced method. And a new turbine component is developed using characteristic equation of a wind turbine and pitch angle control algorism. The generator output and current supplied into utility can be obtained by the transient analysis using PSCAD/EMTDC.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.627-627
• /
• 2012

본 연구의 목적은 수문학적 분석과 다기준의사 결정을 사용한 계획 구성을 통한 하수처리수 재이용의 실현성을 보여주는데 있다. 안양천의 10개의 소유역을 대상으로 BOD와 유량에 대한 대안을 세워보았다. BOD는 각 유역에 3.0 mg/L 와 4.7 mg/L로 선정하였고 유량은 각 소유역에 따라 대안을 선정하였다. 대안에 따른 수문학적 분석은 Hydrological Simulation Program in Fortran (HSPF)을 사용하였다. 본 연구에서는 수질이 향상되고 요구되는 유량만킁의 증가가 있다면 하수처리수 재이용이 파괴된 물 순환의 회복에 얼마나 큰 영향을 미치는지에 대해 보여주었다. 추가적으로 대안의 우선순위를 선정하는데 있어서 다음의 세가지 경우을 비교하였다: 1) 물의 유량과 수질의 영향 그리고 2) 현재 나타나고 있는 유량과 수질의 수문학적 취약점에 대한 고려 마지막으로 3) 사회와 경제적인 측면에서 고려하였는지에 대해 비교하였다. 그 결과 세 가지 경우는 매우 다른 순위를 나타냈다. 그러므로 하수처리수 재이용에 대한 다양한 영향에 대한 고려사항은 유의 깊게 선택 되어야 하겠다.