• 대한치과보철학회지
• /
• 제42권3호
• /
• pp.267-279
• /
• 2004

A modelling scheme for the stress analysis taking into account load transfer characteristics of the osseointegrated interfaces between dental implant and surrounding alveolar bone was investigated. Main aim was to develop a more realistic simulation methodology for the load transfer at the interfaces than the prefect bonding assumption at the interfaces which might end up the reduced level in the stress result. In the present study, characteristics of osseointegrated bone/implant interfaces was modelled with material nonlinearity assumption. Bones at the interface were given different stiffness properties as functions of stresses. Six different models, i.e. tens0, tens20, tens40, tens60, tens80, and tens100 of which the tensile moduli of the bones forming the bone/implant interfaces were specified from 0, 20, 40, 60, 80, and 100 percents, respectively, of the compressive modulus were analysed. Comparisons between each model were made to study the effect of the tensile load carrying abilities, i.e. the effectivity of load transfer, of interfacial bones on the stress distribution. Results of the present study showed significant differences in the bone stresses across the interfaces. The peak stresses, however, were virtually the same regardless of the difference in the effectivity of load transfer, indicating the conventional linear modelling scheme which assumes perfect bonding at the bone/implant interface can be used without causing significant errors in the stress levels.

• 한국결정성장학회지
• /
• 제26권6호
• /
• pp.258-262
• /
• 2016

Foam reaction injection molding (FRIM) is a widely used process for manufacturing polyurethane foam with complex shapes. The modified theoretical model for polyurethane foam forming reaction during FRIM process was established in our previous work. In this study, using the modified model, parametric study for FRIM process was performed in order to optimize experimental conditions of FRIM process such as initial temperature of mold, thickness of mold, and injection amount of polymerizing mixture. In addition, we applied the modified model to real application of refrigerator cabinet to determine optimal manufacturing conditions for polyurethane FRIM process.

• 전자공학회논문지CI
• /
• 제46권4호
• /
• pp.79-86
• /
• 2009

본 논문에서는 노드 밀도를 고려하여 클러스터를 형성함으로써 데이터 병합 효과를 최대화하고, 에너지 소모를 줄일 수 있는 새로운 클러스터링 기법을 제안한다. 이 기법은 최적의 데이터 병합율을 보장할 수 있도록 클러스터 크기를 결정하기 때문에 메시지 전송 반경을 줄이고, 클러스터간의 간섭을 최소화할 수 있다. 또한 지역적으로 인접한 다수의 노드들을 클러스터로 구성하고 멤버 노드로부터 수신된 데이터를 병합하여 전송함으로써 에너지 소모를 줄인다. 시뮬레이션을 통하여 센서 네트워크를 구성하는 노드의 에너지 소모를 최소화하면 센서 네트워크의 생존시간을 연장할 수 있음을 검증한다. 또한 제안한 클러스터링 기법이 기존의 LEACH 클러스터링 기법에 비해 성능이 우수함을 보인다.

• 마이크로전자및패키징학회지
• /
• 제14권2호
• /
• pp.1-8
• /
• 2007

LCD(Liquid Crystal Display) TV(Television) 용 백라이트의 광원으로서 면광원을 개발하였으며 이를 이용한 백라이트를 개발하였다. 백라이트의 광원으로 사용된 면광원은 유리성형을 통하여 채널을 형성하였으며 채널의 모양이 타원형 구조, 높이 4.4 mm, 채널의 실링 부위를 1.4 mm로 최적화된 면광원을 이용하여 제작한 백라이트의 성능을 향상시킬 수 있었다. 본 논문에서는 특히 면광원의 채널구조에 따른 백라이트의 휘도균일도의 변화에 대하여 연구하였으며 특히 광학 시뮬레이션을 통하여 면광원의 채널형상을 최적화 하였다. 채널의 구조가 최적화된 면광원을 이용하여 제작된 32", LCD TV의 휘도는 $576\;cd/m^2$ 이었다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.575-578
• /
• 2000

Die design to minimize the die wear in the cold forging process is very important as it reduce the production cost and the increase of the production rate. The quantitative estimation for the die wear is too hard because the prediction of the die wear is determined with many process variables. So, in this paper, the optimal shape of the backward extrusion punch is newly designed through the FE-analysis considering the surface expansion and Archard's wear model in order to reduce the rapid wear rate that is generated for the backward extrusion product exceeding the forming limit. The main shape variables of the backward extrusion punch are the flat, angle, and round of the punch nose part. As the flat and angle of the punch nose are larger, the surface expansion is reduced. and, the wear rate is decreased according to the reduction of the punch round. These results obtained through this study are applied to the real manufacturing process, it is implemented the reduction of the wear rate.

• 한국정밀공학회지
• /
• 제21권10호
• /
• pp.180-187
• /
• 2004

Die design to minimize the die wear in the cold forging process is very important as it reduce the production cost and the increase of the production rate. The quantitative estimation fur the die wear is too hard because the die wear is caused by many process variables. So, in this paper, the optimal shape of the backward extrusion punch is newly designed through the FE-analysis considering the surface expansion and Archard wear model in order to reduce the rapid wear rate that is generated for the backward extruded products exceeding the forming limit. The main shape variables of the backward extrusion punch are the flat diameter, angle, and round of the punch nose part. As the flat diameter and angle of the punch nose are larger, the surface expansion is reduced and the wear rate is decreased according to the reduction of the punch round. These results obtained through this study can be applied to the real manufacturing process.

• 대한기계학회논문집A
• /
• 제24권10호
• /
• pp.2610-2618
• /
• 2000

In this paper, the elastic deformation of cold forging die has been investigated to improve the accuracy of forged parts with FEM analysis and experiments using the strain gages. In the finite element analysis, two types of analysis are used to predict elastic deformation of die. The one is that dies are considered to be elastic body from initial stage to final one, and the other is that the dies are considered to be rigid body during forging simulation and then considered to be elastic body at elastic analysis. Considering the results of analysis and experiments, it is likely that the analytical results are in good agreement with experimental inspections. The method using the elastic assumption of die relatively takes a lot of time to simulate the forming operation. However, It is better that using an elastic die to predict not only the shape of product but also filling of die cavity.

• 한국인터넷방송통신학회논문지
• /
• 제13권2호
• /
• pp.137-142
• /
• 2013

도래 방향 추정은 공간상에서 안테나에 수신된 원하는 신호의 입사 방향을 추정하는 것이다. 본 논문에서는 레이더에서 다중 빔 형성을 이용하여 신호 도래 방향을 추정하였다. 신호 도래 방향의 추정방법으로 본 논문에서는 빔 조향 제안 알고리즘과 공간 상관 행렬 가중치를 이용하였다. 모의실험을 통하여 본 연구에서 제안된 알고리즘 성능을 기존 알고리즘과 비교분석하였다. 목표물 도래방향 추정에서 본 연구에서 제안한 방법이 고유치 전개를 하지 않기 때문에 처리시간 단축에서 효과적이다. 본 연구에서 제안한 방법이 목표물 추정에서 기존 알고리즘보다 우수함을 나타내었다.

• 대한전자공학회논문지SP
• /
• 제39권1호
• /
• pp.77-86
• /
• 2002

본 논문은 공간보간을 이용한 공간평활을 수행하는 수정된 구조의 Duvall 빔형성기를 제안한다. 제안한 빔형성기는 이웃한 어레이 소자 사이의 신호를 보간하여 가상의 어레이 소자 신호를 생성하고 이를 이용하여 공간평활을 수행한다. 제안한 빔형성기는 보간된 신호를 이용하여 부어레이를 형성함으로써 기존 공간평활 기법의 자유도 손실 문제를 해결한다. 수학적 분석을 통하여 제안한 빔형성기는 입력 공분산 행렬의 감소된 랭크를 회복할 수 있음을 확인하였다. 또한 모의실헐 결과에서도 제안한 빔형성기는 기존의 빔형성기가 제거할 수 없는 코히어런트 간섭신호를 제거함을 보였다.

• 한국산업융합학회 논문집
• /
• 제21권2호
• /
• pp.53-62
• /
• 2018

This study propose a new approach to control the optimal working path of vertical type articulated robot with translation joint for trimming working process automation in forging manufacturing process. The basic structure of the proposed robotic joints controller consists of a Proportional-Intergral controller and a Proportional-Derivative controller in parallel. The proposed control scheme takes advantage of the properties of the fuzzy PID controllers. The proposed method is suitable to control of the trajectory and path control in cartesian space for vertical type articulated robot manipulator. The results illustrates that the proposed fuzzy computed torque controller is more stable and robust than the conventional computed torque controller. The reliability is varified by simulation test for vertical type s articulated robot with seven joints including one trqanslation joint.