• ETRI Journal
• /
• v.38 no.1
• /
• pp.81-89
• /
• 2016

In this paper, a beam ID preamble (BIDP) technique, where a beam ID is transmitted in the physical layer, is proposed for efficient beam training in millimeter-wave cellular communication systems. To facilitate beam ID detection in a multicell environment with multiple beams, a BIDP is designed such that a beam ID is mapped onto a Zadoff-Chu sequence in association with its cell ID. By analyzing the correlation property of the BIDP, it is shown that multiple beams can be transmitted simultaneously with the proposed technique with minimal interbeam interference in a multicell environment, where beams have different time delays due to propagation delay or multipath channel delay. Through simulation with a spatial channel model, it is shown that the best beam pairs can be found with a significantly reduced processing time of beam training in the proposed technique.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.6
• /
• pp.37-46
• /
• 2003

This paper is to predict quality deterioration resulting from a caulking process of yoke which is a part of automotive steering system. The caluking is a plastic deformation process involving such as impact of high speed tool, contacts between part and fixtures and strain rate sensitivity of the part material. Elaborate application of finite element method is neccesary to calculate changes of part dimensions because they fall into a level of tolerances. Simple work hardening and strain rate sensitive model is proposed fur the material and applied for the simulation by using Abaqus which is able to cater for elastoplastic rate sensitive material and contacts. Numerical results of test models that represent tensile bar and tensile plate are compared with material data inputs. Dimensional changes for the yoke are calculated from simulations and compared to the mesurements and they show good agreement. The method presented here with the material model proved to be valuable to assess quality deterioration for similar metal forming processes.

• Journal of Communications and Networks
• /
• v.9 no.3
• /
• pp.247-253
• /
• 2007

In this paper, downlink capacity of time duplex division (TDD) based cellular wireless networks utilizing fixed hopping stations is investigated. In the network, a number of fixed subscriber stations act as hopping transmission stations between base stations and far away subscribers, forming a cellular and ad hoc mobile network model. At the radio layer, TDD code division multiple access (CDMA) is selected as the radio interface due to high efficiency of frequency usage. In order to improve the system performance in terms of downlink capacity, we propose different time slot allocation schemes with the usage of fixed hopping stations, which can be selected by either random or distanced dependent schemes. Performance results obtained by computer simulation demonstrate the effectiveness of the proposed network to improve downlink system capacity.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.4 no.3
• /
• pp.69-75
• /
• 2008

The objective of this paper is to increase the performance by selecting the optimal value in outputs of two algorithms that are Generlized-Lagrange and LMS(Least Mean Square). This paper presents superior performance by mixed two of conventional algorithm arbitrary. Based on the analysis from various simulation, it is observed that proposed method is better performance in terms of practical WLL(Wireless Local Loop) environment.

• Proceedings of the KIPE Conference
• /
• 2002.11a
• /
• pp.103-107
• /
• 2002

A contact-less power supply system (CPS) allows electrical energy to supply to mobile consumers without any electrical or mechanical contact. CPS works in the same principle as a transformer, with the track litz cable forming the primary circuit and the pickup as the secondary. The track power supply generates the high frequency alternating current in the track cable. The captured AC magnetic field generated by the track conductors produces electrical energy in the pickup coil and the pickup rectifier converts the high frequency AC power to DC while regulating the power to the load. This paper presents the theoretical analysis, simulation and experiment리 results of the series-parallel resonant converter working as contact-less power supply system.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2004.05a
• /
• pp.20-23
• /
• 2004

In non-selective frequency environment, it is difficult to take the advantage of path diversity. In the literature, some methods have been proposed to solve the issue. This paper presents a new method to obtain the resolvable path in Indoor Multi-carrier Code Division Multiple Access (MC-CDMA) system by using downlink beam forming. With the aid of downlink beamforming, the most reliable path is found and chosen for the communication link. The new approach is evaluated in term of bit error rate (BER) and power consumption. The simulation results show that the new approach can get better BER performance. However, the cost of BER improvement is a small degradation in power reservation.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1998.06a
• /
• pp.95-101
• /
• 1998

The steel door inner was manufactured via a new route, tailored blanking process, to remove hinge reinforcement parts, using thicker panels laser welded, instead. It is very important, first of all, in this process, to design optimum configuration of tailored blanks and determine the optimum process control for the stamping. Generally, it was found that the severe deformation reduction behavior during stamping in the thinner panel around weld line caused cracks and the other troubles in formability. It is our purpose of this investigation to introduce how the process control parameters, such as tailored blank configuration, size, location in the die, the position of weld line, BHF, bead configuration, work on the formability. In addition, causes of cracks and movement of weld line after forming were analyzed and compared with computer simulation work.

• Transactions of Materials Processing
• /
• v.10 no.1
• /
• pp.67-74
• /
• 2001

The cold forging process to produce a long-neck flange is investigated by using model material test. The two stage process with optimum design condition is examined using plasticine, which is suitable to model steel at room temperature. The similarity theory is employed to estimate the forging load of each sequence by strict application of similarity condition between steel(AISI 1015) and plasticine material The model test results are compared with the simulation results and shows good agreement. The proper forging process with least forming energy can be resulted in $25^{\circ}$ of extrusion semi-die angle.

• Transactions of Materials Processing
• /
• v.7 no.6
• /
• pp.594-602
• /
• 1998

The design analysis of axisymmetric, multi-stage deep drawing dies was performed using the rigid-viscoplastic finite element formulation. In the formulation the axisymmetric CFS algorithm was employed. Hill's non-quadratic normal anisotropic yield criterion and isotropic hardening rule were considered. For trial initial displacements and tool contact points. the geometric force equilibrium method was adopted. In order to see the validity of the formulation, the multi-stage deep drawing processes of shell-cylinder front part of hydraulic booster were simulated. The simulation showed good agreements with measurments and PAM-STAMP results.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2008.05a
• /
• pp.383-386
• /
• 2008

Magnesium alloy sheets have been extending their field of applications to automotive and electronic industries taking advantage of their excellent light weight property. In addition to their excellent light property, magnesium alloys have several other advantages: high specific strength, good welding capability and corrosion resistance. Taking advantage of these benefits, magnesium alloys have also been substituting the polymeric materials in the electronic devices industries. In sheet metal forming application with magnesium alloys, the lower formability and high springback due to the lower elastic property (Young's modulus=45 GPa) at room temperature are major hurdles by which magnesium alloys have limited applications. In this study, commercial notebook case was adopted as the benchmark model, and then design parameters and process conditions are analyzed by the finite element simulation and physical try-outs.