• Journal of the Korea Convergence Society
• /
• v.6 no.4
• /
• pp.1-7
• /
• 2015

This study is a case study of the research study and education with high school students of natural sciences. Recent development of the Internet of Things (IoT) based on the subject of various studies exist. This study is one of the most portable communication devices of these infancy, yet students were easy to define the molding process of contacting a pager that can go along way in making research topics. We called a pager. Today, it is given a large and complex smart mobile communication devices that can be used for big data. Prior pagers are taught the meaning of the first mobile communication means in our lives were given device. The internal structure is relatively simple and is thought to function relatively simple, just suitable as a teaching practices of high school students with an interest in science and engineering universities. This study can see all of the mechanical, electronic information contents of the radio pager in a relatively simple analysis of the injection molding ONE CAVITY analysis. Furthermore, the students also rated good educational practices that give meaning to remind the convergence training on mass production and process automation.

• Journal of Ecology and Environment
• /
• v.40 no.1
• /
• pp.66-74
• /
• 2016

Background: When developing water quality improvement strategies for eutrophic lakes, questions may arise about the relative importance of point sources and nonpoint sources of phosphorus. For example, there is some skepticism regarding the effectiveness of partial reductions in phosphorus loading; because phosphorus concentrations are too high in hypertrophic lakes, in-lake phosphorus concentrations might still remain within typical range for eutrophic lakes even after the reduction of phosphorus loading. For this study, water quality and the phytoplankton and zooplankton communities were monitored in a hypertrophic reservoir (Lake Wangsong) before and after the reduction of phosphorus loading from a point source (a sewage treatment plant) by the installation of a chemical phosphorus-removal process. Results: Before phosphorus removal, Lake Wangsong was classified as hypertrophic with a median phosphorus concentration of $0.232mg\;L^{-1}$ and a median chlorophyll-a concentration of $112mg\;L^{-1}$. The dominant phytoplankton were filamentous cyanobacteria for the most of the ice-free season. Following the installation of the advanced treatment process, phosphorus concentrations were reduced to $81mg\;L^{-1}$, and the N/P atomic ratio increased from 42 to 102. Chlorophyll-a concentrations decreased to $42{\mu}g\;L^{-1}$, and the duration of cyanobacterial dominance was confined to the summer season. Cyanobacteria in spring and autumn were replaced by diatoms and cryptomonads. Filamentous cyanobacteria in summer were replaced by colony-forming unicellular Microcystis spp. It was remarkable that zooplankton biomass increased despite the decrease in phytoplankton biomass, and especially cladoceran zooplankton which increased drastically. These responses to the reduction of point source P loading to Lake Wangsong imply that reducing the point source P loading can have a big impact even when nonpoint sources account for a large fraction of the total annual phosphorus loading. Conclusions: Our results also show that the phytoplankton community can shift to decreased cyanobacterial dominance and the zooplankton community can shift to higher cladoceran dominance, even when phosphorus concentrations remain within the typical range for eutrophic lakes following the reduction of phosphorus loading.

• Journal of the Korean earth science society
• /
• v.34 no.3
• /
• pp.274-285
• /
• 2013

The purpose of this study was to develop geological field study sites for learning topography and geology of the area with igneous rocks, specifically in Duibaejae volcanic edifice and Seonang-bawi that were distributed in Goseong-gun, Gangwon-do area. As a follow up, we conducted a study to examine the effect of the study sites when applied to high school freshmen Earth science course. The study proceeded based on the Orion's model in the order of preparatory unit, field trip, and summary unit. The geological field study sites were developed based on the geological study elements presented in the Korean Earth science curriculum. Before the field trip, students simply memorized factual knowledge on minerals, rocks and etc., and showed very low level of understanding on the formation process of the region that was distributed with granite and basalt. Especially, their understanding showed that granite and basalt were formed from the same magma at the same time. After the field trip, they increased in-depth level of understanding about minerals, rocks, and geological structures, but were not able to explain the topographical characteristics of the two rocks because they did not recognize the times of the creation of granite and basalt. The reason is that they have learned the simple concept of the process of forming granite and basalt in their middle school, but that they have not learned the meaning of the difference between two the geological eras when each of the two rocks, granite and basalt, were formed.

• Journal of the Korean Vacuum Society
• /
• v.7 no.3
• /
• pp.267-267
• /
• 1998

The fluorine doped silicon oxide (SiOF) intermetal dielectric (IMD) films have been of interest due to their lower dielectric constant and compatibility with existing process tools. However instability issues related to bond and increasing dielectric constant to water absorption when the SiOF films was exposured to atmospheric ambient. Therefore, the purpose of this research is to study the effect of post oxygen plasma treatment on the resistance of moisture absorption and reliability of SiOF film. Improvement of moisture absorption resistance of SiOF film is due to the forming of thin SiO₂layer at the SiOF film surface. It is thought that the main effect of the improvement of moisture absorption resistance was densification of the top layer and reduction in the number of Si-F bonds that tend to associate with OH bonds. However, the dielectric constant was increased when plasma treatment time is above 5 min. In this study, therefore, it is thought that the proper plasma treatment time is 3 min when plasma treatment condition is 700 W of microwave power, 3 mTorr of process pressure and 300℃ of substrate temperature.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.5
• /
• pp.437-442
• /
• 2010

This work was initiated both to maximize purity of calcium fluoride sludge and to minimize water content in the settled sludge. The sludge was produced in the process of fluoride removal of semiconductor wastewater by the addition of $Ca^{2+}$ ion. Fludized bed reactor(FBR) using calcium fluoride as a seed was adapted. Optimum pH and molar ratio of $Ca^{2+}/F^-$ were determined in lab-scale study. The experimental results showed that fluoride removal was increased as pH and molar ratio of $Ca^{2+}/F^-$ increased, with the best removal of 79.8% in an optimum condition. In the optimum point of fluoride removal, very low ${PO_4}^{3-}$-P removal of 9.3% was observed. It indicates forming $CaF_2$ crystal of high purity, when side reaction of calcium with phosphate was minimized. In addition, water content of settled sludge was 19.3%, which is relatively low compared to other fluoride removal processes. Consequently, the FBR process proposed in this study was very effective in fluoride removal, producing good sludge of high purity and less water content.

• The Korean Journal of Pesticide Science
• /
• v.10 no.2
• /
• pp.131-137
• /
• 2006

This experiment was conducted to select prominent microorganisms with a good insecticidal activity among the ten species, which isolated from soil at the near of Chung-buk, Chung-nam, and Gang-won provinces and made protein crystal endotoxin. As a result, GB-413 strain was finally selected, which showed the high insecticidal activity against susceptible diamondback moth (Plutella xylostella), beet army worm (Spodoptera exigua) and tobacco cutworm (Spodoptera litura) as well as resistant diamondback moth strains. By modifying the cultivation process f.g. lowing the glucose concentration at early cultivation stage and adding the carbon after inducing the spores, the percentage of making spore as well as the number of active spore were increased and the time for cultivation and spore forming was reduced without a reduction of insecticidal activity. These results were not only applied successfully for the optimized cultivation process for a fermentation tank containing five tons capacity, but also improved the possibility of mass cultivation for commercial production.

• Microbiology and Biotechnology Letters
• /
• v.40 no.4
• /
• pp.403-408
• /
• 2012

Gelatin/Ag nanoparticle (AgNP) biocomposite was synthesized using the solution plasma process (SPP) that has been recently introduced as an effective method for synthesis of nanoparticles. In this study, gelatin/AgNP biocomposite was synthesized using various concentrations of Ag precursor ($AgNO_3$) and gelatin in the range of 1-5 mM and 1-3% (w/w), respectively, without using any chemical reducing agent. Physical properties of the gelatin/AgNP biocomposites were analyzed using EDS, FE-SEM, and TEM. The results indicated that spherical AgNPs with approximately 12~20 nm in diameter were synthesized successfully in the gelatin matrix by SPP. As the concentration of gelatin was increased (3%, w/w), disperse stability of AgNP was improved and micro-pores of gelatin became smaller and denser in the 3D scaffold. Bactericidal activity of the AgNPs was examined against Staphylococcus aureus and Escherichia coli by measuring zone of growth inhibition and decrease in colony forming unit (CFU). CFUs of S. aureus and E. coli were decreased approximately to 56% and 0%, respectively, by the gelatin/AgNP biocomposite, Ag5G3.

• The Journal of the Korea Contents Association
• /
• v.16 no.5
• /
• pp.520-532
• /
• 2016

In this paper, we propose a novel method to analyze and quantitatively evaluate the impression of landscapes and soundscapes about traditional area of Chungnam Asan city in Korea. For this, we collated data about impression evaluation of Korean and Japanese students and, based on these result, we proved the validity and usefulness of the evaluation system that we proposed through this study. The research process conducted in this study as follows: first of all, we had selected five traditional places of interest in Asan City, and investigated various conditional elements of the area including soundscapes which is forming the landscape using video camera. And we made both Korean and Japanese students evaluate the impression for these videotaped landscape data through using the SD(semantic differential) method. And then, we quantified these qualitative data through applying the quantification theory and cluster analysis method to them. Though this process, we could obtain both data as a result derived by classifying each sample and categorizing levels of those impression evaluation. Because of totally difference between those two analyzing processes, which one is for sample classification and the other is for determining impression level, we could validate the usefulness of our evaluation system through conducting comparative analysis of results from both methods. Analysis showed that our novel evaluation system for landscape is effective and, in most part of the traditional landscape, Japanese students' responses are different far from the Korean students' responses.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.6
• /
• pp.581-589
• /
• 2005

Recently, membrane processes have been replacing the conventional processes for waste water treatment to produce better quality of effluent and to meet more stringent regulations because of water shortage. However, using membrane processes for water treatment has confronted with fouling and difficulty in treating dissolved organic pollutants. In this study, membrane process equipped with crossflow microfiltration is combined with coagulation process using alum and PAC to improve permeability and treatment efficiency. The effects of coagulant dosage and optimum membrane operating conditions were investigated from measurement of permeate flow, cumulative volume, total resistance, particle size, dissolved organic pollutant, dissolved aluminium and quality of effluent. Characteristic of PAC coagulation was compared with that of alum coagulation. PAC coagulation reduced membrane fouling because of forming larger particle size and increased permeate velocity and cumulative volume. Less dissolved organic pollutants and dissolved aluminum made decreasing-rate of permeate velocity being lowered. At using $0.2\;{\mu}m$ membrane, cake filtration observed. At using $0.45\;{\mu}m$ membrane, there was floc breakage due to shear stress occurred born circulating operation. It made floc size smaller than membrane pore size, which subsequently to decrease permeate velocity and to increase total resistance. The optimum coagulation dosage was $300{\pm}50\;mg/L$ for both alum and PAC. PAC coagulation was more efficiently used with $0.2\;{\mu}m$ membrane, and the highest permeate flux was in using $0.45\;{\mu}m$membrane. The greatest efficiency of treatment was as follows; turbidity 99.8%, SS 99.9%, $BOD_5$ 94.4%, $COD_{Cr}$ 95.4%, T-N 54.3%, T-P 99.8%.

• Resources Recycling
• /
• v.15 no.2 s.70
• /
• pp.18-23
• /
• 2006

Foaming of slag is a thermodynamically unstable phenomenon and has significant effects in iron and steelmaking processes. For better recycling method of pulp sludge, the application as an defoaming agent during steelmaking process was adopted and tested. The forming machine has been modified in order to produce the briquettes, which are made of pulp sludge and slag with different weight ratio. Influencing factors on the foaming phenomena have been studied and tested for better understanding of foaming phenomena. Experiments were carried out with $CaO-FeO-SiO_2$ based slags with Ar gas injection and addition of coke particles. The slag basicity and (%FeO) contents adapted as major factors to treasure foaming tendency of the slag system. It was found that foam index (${\Sigma}$) gradually decreased as both the basicity and the (FeO) content increase. Four kinds of antifoaming agent such as aluminium dross, cokes, rice bran and pulp sludge with steelmaking slag have been tested in actual process. Aluminium dross was the most effective, and pulp sludge with steelmaking slag also showed the desired results.