• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.1
• /
• pp.56-63
• /
• 2018

The present study examined the reversal cyclic flexural behavior of walls with jacket section approach for seismic strengthening through forming the boundary elements at both ends of the wall. The prestressed wire ropes were used for the lateral reinforcement to confine the boundary element of the wall. The main parameter investigated was the height of the jacket section for strengthening. The limit height of the strengthening jacket section was determined by comparing the moment distributions between the existing and strengthened walls. Test results showed that the examined jacket section approach was significantly effective in enhancing the flexural resistance of walls, indicating 46% higher stiffness at peak strength and 210% greater work damage indicator, compared with the flexural performance of the unstrengthened wall. The ductility of the strengthened walls was insignificantly affected by the height of the jacket section when the height is greater than twice the wall length. The flexural capacity of the strengthened walls was 22% higher than the predictions obtained using the equivalent stress block specified in ACI 318-14.

• Nuclear Engineering and Technology
• /
• v.44 no.4
• /
• pp.429-436
• /
• 2012

Critical heat flux (CHF) is the thermal limit of a phenomenon in which a phase change occurs during heating (such as bubbles forming on a metal surface used to heat water), which suddenly decreases the heat transfer efficiency, thus causing localized overheating of the heating surface. The enhancement of CHF can increase the safety margins and allow operation at higher heat fluxes; thus, it can increase the economy. A very interesting characteristic of nanofluids is their ability to significantly enhance the CHF. Nanofluids are nanotechnology-based colloidal dispersions engineered through the stable suspension of nanoparticles. All experiments were performed in round tubes with an inner diameter of 0.01041 m and a length of 0.5 m under low pressure and low flow (LPLF) conditions at a fixed inlet temperature using water, 0.01 vol.% $Al_2O_3$/water nanofluid, and SiC/water nanofluid. It was found that the CHF of the nanofluids was enhanced and the CHF of the SiC/water nanofluid was more enhanced than that of the $Al_2O_3$/water nanofluid.

• Journal of Microbiology and Biotechnology
• /
• v.27 no.2
• /
• pp.219-225
• /
• 2017

An aqueous chlorine dioxide ($ClO_2$) treatment combined with highly activated calcium oxide (CaO) and mild heat was tested for inactivating naturally existing bacteria and Escherichia coli O157:H7 inoculated on fresh-cut kale. Kale samples were treated with different concentrations of $ClO_2$ (10, 30, and 50 ppm), CaO (0.01%, 0.05%, 0.1%, and 0.2%), and mild heat ($25^{\circ}C$, $45^{\circ}C$, $55^{\circ}C$, and $65^{\circ}C$) as well with combinations of 30 or 50 ppm $ClO_2$ and 0.2% CaO at $55^{\circ}C$ for 3 min. An increasing concentration of $ClO_2$ and CaO significantly reduced the microbial population compared with the control. In addition, mild heating at $55^{\circ}C$ elicited greater microbial reduction than the other temperatures. A combined treatment of 50 ppm $ClO_2$ and 0.2% CaO at $55^{\circ}C$ reduced the population of naturally existing bacteria on kale by 3.10 log colony forming units (CFU)/g, and the counts of E. coli O157:H7 were below the detection limit (1 log CFU/g). In addition, no significant differences in the Hunter color values were evident in any treatment during storage. Therefore, a combined treatment of $ClO_2$ and active CaO at $55^{\circ}C$ can be an effective sanitizing method to improve the microbiological safety of fresh-cut kale without affecting its quality.

• Resources Recycling
• /
• v.17 no.3
• /
• pp.3-9
• /
• 2008

The measurement of physicochemical properties and chemical composition of SSA(sewage sludge ash) has been carried out and the preparation of lightweight material has also been performed using SSA for reuse as building or construction materials. For this aim, lightweight material has been prepared by forming the mixture of SSA, lightweight filler and inorganic binder followed by calcination at elevated temperature and characterized in terms of density and compressive strength. The pH of fly ash was found to be slightly alkaline, pH 8.69, due to the addition of caustic soda in order to neutralize the acidic gas while the pH of bottom ash was 6.48 Heavy metal leachability based on the standard leach test was also found to be below the detection limit for Cd, Cu, Pb, As and Cr of SSA. As far as the compressive strength of lightweight material was concerned, the compressive strength of lightweight material using fly ash was higher than that of lightweight material using bottom ash.

• Composites Research
• /
• v.33 no.2
• /
• pp.61-67
• /
• 2020

Preforming is crucial in resin transfer molding process using woven fabric. When shear deformation exceeds the locking angle, wrinkles are generated in the preform, which causes defects in the RTM process. Therefore, in this study, the allowable shear deformation limit of carbon fiber woven fabrics is quantified and the molding characteristics are verified using the actual fabric forming. As a result, the characteristics of creases according to the layer setups have been examined and the results have been discussed. Numerical analyses have been also performed using measured shear properties. These results have been compared with the experimental results.

• The Journal of Fisheries Business Administration
• /
• v.1 no.1
• /
• pp.19-68
• /
• 1970

This is a study of a long term project to encourage the Korean fishing industry. It seeks to supply a sound theoretical background in an attempt to liberalize the capital investment of the industry. However, the discussions developed in this thesis are based on, the existing world's fisheries resources, the possibility of their prospective cultivation, and the analysis of the evolution of Korean fisheries and fisheries organization. According to the reasults of the analysis ; out of the prospective world fisheries resources which are estimated at about 200 millions m/t the total yield per year is only about 70 millions m/t (1969), and Korea occupies only 850 thousands m/t. This therefore means that the Korean fishing industry allows much room for further growth. But the purpose of Korea's existing fishing industry organizations is entirely directed toword coastal fisheries and their functions never reache beyond the limit of off-shore fisheries. Thus almost 99% of the fisheries population engage in small scale fisheries along the coast line. The result is that the resource are almost exhausted by such over-exploitation. Being faced by this fact, it is of urgent necessity to modernize the management of fisheries as well as to encourage larger scale management of fisheries industries. This should be accompanied by the liberalization of capital investment. For this purpose this study also recommends the unification or annexation of small organizations to establish larger ones that will function for a larger scale industry. and further this study recommends that, in order to reorganize the existing fisheries organizations, a principle of selection should be applied in the areas of (1) maximum sustainable yields, (2) the possibility of forming an enterprise and (3) the maintenance of organization stability.

• Journal of Microbiology and Biotechnology
• /
• v.23 no.1
• /
• pp.1-6
• /
• 2013

Tetanus is a specific infectious disease, which is often associated with catastrophic events such as earthquakes, traumas, and war wounds. The obligate anaerobe Clostridium tetani is the pathogen that causes tetanus. Once the infection of tetanus progresses to an advanced stage within the wounds of limbs, the rates of amputation and mortality increase manifold. Therefore, it is necessary to devise a rapid and sensitive point-of-care detection method for C. tetani so as to ensure an early diagnosis and clinical treatment of tetanus. In this study, we developed a detection method for C. tetani using loop-mediated isothermal amplification (LAMP) assay, wherein the C. tetani tetanus toxin gene was used as the target gene. The method was highly specific and sensitive, with a detection limit of 10 colony forming units (CFU)/ml, and allowed quantitative analysis. While detecting C. tetani in clinical samples, it was found that the LAMP results completely agreed with those of the traditional API 20A anaerobic bacteria identification test. As compared with the traditional API test and PCR assay, LAMP detection of C. tetani is simple and rapid, and the results can be identified through naked-eye observation. Therefore, it is an ideal and rapid point-of-care testing method for tetanus.

• Journal of Electrochemical Science and Technology
• /
• v.13 no.1
• /
• pp.78-89
• /
• 2022

ANODE-free Li-metal batteries (AFLMBs) operating with Li of cathode material have attracted enormous attention due to their exceptional energy density originating from anode-free structure in the confined cell volume. However, uncontrolled dendritic growth of lithium on a copper current collector can limit its practical application as it causes fatal issues for stable cycling such as dead Li formation, unstable solid electrolyte interphase, electrolyte exhaustion, and internal short-circuit. To overcome this limitation, here, we report a novel dual-salt electrolyte comprising of 0.2 M LiPF₆ + 3.8 M lithium bis(fluorosulfonyl)imide in a carbonate/ester co-solvent with 5 wt% fluoroethylene carbonate, 2 wt% vinylene carbonate, and 0.2 wt% LiNO₃ additives. Because the dual-salt electrolyte facilitates uniform/dense Li deposition on the current collector and can form robust/ionic conductive LiF-based SEI layer on the deposited Li, a Li/Li symmetrical cell exhibits improved cycling performance and low polarization for over 200 h operation. Furthermore, the anode-free LiFePO₄/Cu cells in the carbonate electrolyte shows significantly enhanced cycling stability compared to the counterparts consisting of different salt ratios. This study shows an importance of electrolyte design guiding uniform Li deposition and forming stable SEI layer for AFLMBs.

• Journal of Microbiology and Biotechnology
• /
• v.33 no.8
• /
• pp.1101-1110
• /
• 2023

Streptococcus mutans is the primary causative agent of caries, which is one of the most common human diseases. Thus, rapid and early detection of cariogenic bacteria is critical for its prevention. This study investigated the combination of loop-mediated isothermal amplification (LAMP) and microfluid technology to quantitatively detect S. mutans. A low-cost, rapid microfluidic chip using LAMP technology was developed to amplify and detect bacteria at 2.2-2.2 × 10⁶ colony-forming units (CFU)/ml and its detection limits were compared to those of standard polymerase chain reaction. A visualization system was established to quantitatively determine the experimental results, and a functional relationship between the bacterial concentration and quantitative results was established. The detection limit of S. mutans using this microfluidic chip was 2.2 CFU/ml, which was lower than that of the standard approach. After quantification, the experimental results showed a good linear relationship with the concentration of S. mutans, thereby confirming the effectiveness and accuracy of the custom-made integrated LAMP microfluidic system for the detection of S. mutans. The microfluidic system described herein may represent a promising simple detection method for the specific and rapid testing of individuals at risk of caries.

• Korea Real Estate Review
• /
• v.24 no.1
• /
• pp.77-90
• /
• 2014

With the purpose of preventing improper development on the national land, the land development permission system which is performed from 2002 has meaning as a type of limiting the property right, but modification on the details of traditionally understood land ownership is inevitable. Also, releasing the development prohibit on the land not only stop in recovering the freedom for land development, but also can be interpretated as a cause of forming the land development right, therefore the purpose of this study is to develop this into a real right. When we look at the development activity permission as a form of limiting the property right, constitutional problems of basis for that limit and compensation demand can occur. However, that limit can be recovered or relieved through permitting the development activity, therefore the compensation problem can be solved. Due to the development activity permission system, the land development right was separated from the land ownership to be communalized, and now, the land ownership only has condition use right left and don't have the future condition change right in principle, therefore modifying the traditional concept of land ownership is inevitable. By the virtue of the land ownership authority, the land development permission system must have the property to separate the development right as the independent right to be authorized of its legitimacy. Without these properties, the land development permission system cannot satisfy the social necessity of the land development right and its discussion under the category of the land ownership limit theory can't be deviated. In the existing "Civil Law" or in the Land Regulation Law system, there are many difficulties and limits in generalizing the land development right as a real right. Therefore, it is considered that by establishing a social law idea of Framework Act on the Land to characterize the land right theory in the real right theory, the land development permission system or the development right theory should be studied and developed independently and systematically.