• Proceedings of the Membrane Society of Korea Conference
• /
• 1992.10a
• /
• pp.9-9
• /
• 1992

막 반응기(membrane reactor)는 365 nm 의 파장을 갖는 UV를 담체튜브 및 코팅막에 조사시켜 막 표면에서 유기물의 산화반응이 일어날수 있도록 고안하였으며 일차적으로 formic acid의 산화효율을 측정하였다. 코팅된 담체는 코팅하지 않은 담체에 비해 flux가 상당히 저하하는 반면에 formic acid의 산화효율은 이에 비례하여 증가하였다. 또한 본 실험의 결과로부터 수처리공정에서 문제시되는 난분해성 유기물질의 산화분해처리에 대한 광촉매 막의 응용성을 제시하고자 한다.

• Fire Science and Engineering
• /
• v.25 no.1
• /
• pp.57-62
• /
• 2011

The flash point is one of the most significant combustion properties of flammable liquids in industrial processes when evaluation process safety, In this paper, Cleveland open cup tester is used to measure the flash points for the two binary systems (n-propanol + formic acid and acetic acid + propionic acid). The measured flash points were compared with the values calculated by the Raoult's law and the optimization method using van Laar and Wilson equations. The calculated values based on the optimization method were found to be better than those based on the Raoult's law.

• Journal of the Korean Chemical Society
• /
• v.55 no.2
• /
• pp.218-229
• /
• 2011

We have involved the imine compound 1 in condensations with various nitrogenous reagents including hydrazine hydrate to construct differently substituted pyrimidines. One of the pyrimidines so obtained was further subjected to interactions with different reagents such as propionic acid, formic acid, ethyl chloroformate, acdetic anhydride, carbon disulphide, cyanogene bromide, triflauroacetic acid and ethyl chloroacetate which resulted in the formation of annulated heterocyclic systems as pairs of isomers in most cases as a result of Dimroth-type rearrangement.

• YAKHAK HOEJI
• /
• v.52 no.1
• /
• pp.12-19
• /
• 2008

The organic acids (formic acid, acetic acid and propionic acid), phenol and benzopyrene in wood vinegar were determine by HPLC. An $Atlantis^{TM}dC_{18}$ column with a acetonitrile: 0.1% phosphoric acid (5: 95, organic acids), acetonitrile: water (10 : 90, phenol), 100% acetonitrile (benzopyrene) as a mobile phase was used. Retention time of acetic acid, formic acid, propionic acid, phenol and benzopyrene was 4.77, 3.73, 9.08, 30.97 and 6.10 min, respectively. The calibration curves of organic acids, phenol, benzopyrene were linear over the concentration range of $30{\sim}500,\;60{\sim}1000$, and $3{\sim}50\;{\mu}g/ml$ with correlation coefficient of above 0.999. The limit of detection (LOD) and limit of quantitation (LOQ) of acetic acid, formic acid, propionic acid, phenol, and benzopyrene was 1.71 and 5.19, 1.11 and 3.35, 4.87 and 14.74, 6.45 and 19.55, 0.08 and $0.24\;{\mu}g/ml$, respectively. The coefficients of variation for intra- and inter-day assay were $0.21{\sim}4.14$ and $0.07{\sim}1.19%$, respectively and the precision was $95{\sim}115%$. From this study, we suggest that HPLC is suitable method for the determination of organics in wood vinegar and could be applied to quality control of wood vinegar.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2013.04a
• /
• pp.164-164
• /
• 2013

화학 관련 산업은 고온, 고압뿐만 아니라 반응성이 큰 물질들을 사용하는 복잡한 공정으로 이에 맞는 안전기술이 요구된다. 산업 현장에서 취급하고 있는 각종 화학물질의 안전관리를 어렵게 하는 이유는 취급하는 물질의 화재 및 폭발 특성치에 관한 자료가 부족하거나 정확하지 않은 연소 특성치를 사용하기 때문이다. 가연성물질의 연소현상 가운데 하나인 자연발화는 가연성 혼합기체에 열 등의 형태로 에너지가 주어졌을 때 스스로 타기 시작하는 산화현상으로, 주위로부터 충분한 에너지를 받아서 스스로 점화할 수 있는 최저온도를 최소자연발화온도(AIT : Auto ignition Temperature)라고 한다. 최소자연발화온도는 가연성 액체의 안전한 취급을 위해 중요한 지표가 된다. 순수물질의 최소자연발화온도를 문헌들에서 비교하면, 동일 물질인데도 불구하고 문헌에 따라 다른 최소자연발화온도가 제시되고 있다. 따라서 사업장에서 사고를 예방하기 위해서는 정확한 연소 특성 자료를 이용해야 해야 한다. 그러나 문헌에 제시된 대부분의 자료들은 과거 표준장치 및 자체 제작된 장치 등을 사용해서 얻은 결과이므로, 최근에 고안된 표준 장치를 이용한 결과가 매우 유용한 자료가 될 것으로 본다. 본 연구에서는 자연발화온도를 측정하는데 있어서 최근에 고안된 표준장치인 ASTM E659장치를 이용하여 n-Propanol과 Formic acid 혼합물의 최소자연발화 온도를 측정하였다. n-Propanol과 Formic acid 혼합물의 최소자연발화 온도는 화학 관련 산업 공정에서 매우 중요한 자료가 될 것이다.

• Carbon letters
• /
• v.6 no.1
• /
• pp.41-46
• /
• 2005

Plasma carbon blacks of 20~30 nm diameter were synthesized by direct decomposition of natural gas using a hybrid plasma torch system with 50 kW direct current and 4 MHz of radio frequency. The insulating rector which inside diameter of 400 mm and length of 1500 mm, respectively was kept at 300~$400^{\circ}C$ during the preparation. The ultimate analysis of plasma carbon blacks reveals that the raw plasma carbon blacks contains a large quantity of volatile which is mainly consist of hydrogen. Therefore devolatilization of raw plasma carbon blacks were carried out at $900^{\circ}C$ for one hour under nitrogen atmosphere. The devolatilization leads to the decrease in electrical resistivity and surface oxygen functional groups of plasma carbon black significantly. In order to investigate the plasma carbon as a catalyst support, devolatilized plasma black at $900^{\circ}C$ (DPB) supported PtAu catalyst was synthesized by sodium boronhydride reduction method. Electrochemical measurements and direct formic acid fuel cell test indicated that catalytic activity of DPB supported PtAu catalyst for formic acid oxidation was similar to that of Vulcan XC-72 of commercial carbon black supported one.

• Journal of Mushroom
• /
• v.10 no.4
• /
• pp.244-248
• /
• 2012

This study was conducted to suggest effective storage methods for the use spent mushroom (Flammulina velutipes) substrates (SMS) as animal feed. SMS was storage by deep stacking, composting and vinyl mulching after treated with 1% microbes and 0.5% formic acid. During the storage periods, all of the treatment was covered with hyphae of mushroom. The external change of SMS was shown that the storage of SMS can be improved by anaerobic condition and 1% microbial treatment. The comparatively high temperature, pH and total bacterial number was shown in the SMS treated without microbes and formic acid by composting.

• Applied Chemistry for Engineering
• /
• v.27 no.2
• /
• pp.123-127
• /
• 2016

Methanol fuel cells having advantages of relatively favorable reaction kinetics and higher energy density have attracted increasing interests as best alternative to hydrogen fuel cell because of H2 production, storage and distribution issues. While there have been extensive research works on developing key components such as electrocatalysts as well as their physicochemical properties in practical formic acid fuel cells, there have also been urgent requests for investigating which fuel sources will be more suitable for direct liquid fuel cells in future. In this mini-review, we highlight the overall interest and outlook of formic acid fuel cells in terms of electrocatalysts, fuel supply and crossover, water management, fuel cell efficiency and system integration in comparison with methanol fuel cells.

• Bulletin of the Korean Chemical Society
• /
• v.24 no.11
• /
• pp.1618-1622
• /
• 2003

The photochemical reactions of methanolic nalidixic acid (NAL) solution in the absence and in the presence of air have been investigated using 300 nm UV light. From the reactions, 1-ethyl-7-methyl-4-oxo-4-hydro-1,8-naphthyridine (EMDN),formic acid, and formaldehyde are produced. In the presence of air, hydrogen peroxide is also detected along with the products listed above. The presence of oxygen during the irradiation of methanolic NAL solution effects on the product yield. The initial quantum yields of the products and of the NAL decomposition are determined. Possible reaction pathways for the photochemical reaction are suggested on the basis of the products analysis.

• Journal of the Korean Wood Science and Technology
• /
• v.25 no.4
• /
• pp.45-50
• /
• 1997

This research was studied for dissolving pulp preparation as the raw material of viscose rayon from woody biomass by solvolysis pretreatment. In the change of pulp characteristic after solvolysis pretreatment, the following results were obtained. In the case of solvolysis pretreatment, we have obtained pulp that high purity cellulose, and degree of polymerization was inclined to decrease less than 440 on the phosphoric acid as catalyst. Comparing phosphoric acid and formic acid as catalyst in the solvolysis pretreatment, using on formic acid catalyst is superior to phosphoric acid catalyst for making dissolving pulp.