• 한국세라믹학회지
• /
• 제43권10호
• /
• pp.666-672
• /
• 2006

GDC20($Ce_{0.8}Gd_{0.2}O_{1.9}$) powder was synthesized by oxalate co-precipitation and milling and its thermal decomposition, phase formation, and sinterability were investigated. As-prepared precipitates were non-crystalline due to the milling process and completely decomposed at 400$^{\circ}C$ The powder calcined at 800$^{\circ}C$ for 2 h contained fine p]sty particles with an average size of 0.69 $\mu$m. Attrition milling of the calcined powder for 2 h had a little milling effect, resulting in a slight decrease in the particle size to 0.45 $\mu$m. The milled powder consisted of small spherical primary particles and some large particles, which had been agglomerated during calcination. Due to the excellent sinterability of the powder, sintering of the powder compacts for 4 h showed relative densities of 78.7% at 1000$^{\circ}C$ and 97.8% at 1300$^{\circ}C$, respectively. Densification was found to almost complete at temperature above 1200$^{\circ}C$ and a dense and homogeneous microstructure was obtained. A rapid grain growth occurred between 1200$^{\circ}C$ and 1300$^{\circ}C$. Grains in 0.1$\sim$0.5 $\mu$m sizes at 1200$^{\circ}C$ grew to 0.2$\sim$2 $\mu$m and their size distribution became broader at 1300$^{\circ}C$.

• 대한화학회지
• /
• 제51권4호
• /
• pp.339-345
• /
• 2007

Urea는 높은 온도(60~80 °C)의 수용액 상태에서 PtCl2, H2[PtCl6]·6H2O, H2[IrCl6] Ni(CH3CO2)2 와 반응해서 각각 (1)[PtCl2(Urea)]·2H2O, (2)(NH4)2[PtCl6], (3)(NH4)2[IrCl6]·H2O, (4)[Ni2(OH)2(NCO)2(H2O)2]의 complexes를 생성 한다. complexe 1에서 urea는 중성 bidentate 리간드로써 Pt(II)와 배위한다. complexe 2,3,4에서는 높은 온도에서 반 응하는 동안 배위 urea분자들이 분해되고 다양한 반응생성물들을 얻을 수 있다. 모든 complexes은 각각 적당한 수득률 로 dark green(1) yellow(2), pale brown (3) faint green(4)의 침전물로 분리된다. 반응생성물은 열분석, IR, 1H and 13C NMR spectra에 의해 측정 되었다. 이 complexes의 구성을 설명하는 일반적인 매카니즘이 제시되었다.

• Composites Research
• /
• 제15권3호
• /
• pp.1-10
• /
• 2002

무가압함침법에 의해 제조된 SiCp/AC8A복합재료에 대하여 SiC 입자 크기와 부가적인 Mg의 첨가가 복합재료의 기계적 성질과 마모특성에 미치는 영향을 조사하였다. SiCp/AC8A복합재료의 경도와 굽힘강도는 입자의 크기가 작아짐에 따라 증가하였다. Mg 첨가량이 증가함에 따라 SiCP/AC8A복합재료의 경도는 경질의 반응생성물에 의해 상승하였으나 굽힘강도는 석출물의 조대화와 기공율의 증대에 의해 저하하였다. SiCp/AC8A복합재료는 AC8A 기지재에 비하여 고속의 마찰속도에서 6배의 내마모성을 나타냈으며 강화입자의 크기가 작아짐에 따라 내마모성은 향상되는 것으로 나타났다. 마모기구에 있어서 SiCp/AC8A복합재료는 마찰속도에 관계없이 연삭마모를 나타냈으나 AC8A 기지재는 마찰속도가 고속화됨에 따라 응착 및 용융마모의 마모면을 나타냈다.

• Nuclear Engineering and Technology
• /
• 제22권4호
• /
• pp.337-350
• /
• 1990

약 28$0^{\circ}C$에서 4.84$\times$$10^{18}$ n/$\textrm{cm}^2$의 중성자 조사를 받은 원자로 압력용기강 A533B Cl.1 기 지 금속(base metal)을 열처리한 후, 미세경도 측정과 양전자 소멸법을 사용해서 조사경화회복기구에 관한 더 정확한 연구를 하였다. 등시소둔 실험에 의해 2가지 회복과정이 존재한다는 것을 알 수 있었다. 첫번째 회복과정은 280-35$0^{\circ}C$ 사이에서 일어나며 양전자 소멸법에 의한 몇가지 파라메타 즉, 양전자 수명, 양전자 소멸밀도(I)와 Ip, Iw, R파라메타 값들에 의하면 이 회복과정에서 공공응집(agglomeration of vacancies)과 단위공공의 소멸(annihilation of monovacancies)이 일어나는 것으로 해석되었다. 또한 두번째 회복과정은 405$^{\circ}C$ 이상의 고온에서 발생하며, 양전자소멸 파라메타들은 공공형 결함 주위에 부착되었던 탄소원자의 용해, 석출물의 용해 그리고 단위공공의 소멸이 이 회복과정에서 일어나는 것으로 해석되었다. 그러고 두 회복과정의 중간 온도 영역인 305-405$^{\circ}C$에서는 탄소가 부착된 공공결집체 (vacancy clusters)의 형성과 석출물의 형성에 의한 소둔중경화(radiation anneal hardening)가 일어나는 것으로 해석되었다. Meechan-Brinkman 방법을 이용하여 활성화 에너지와 반응차수 및 그외 회복특성을 구하였다. 첫번째 회복과정의 활성화 에너지는 1.76eV로, 두번째 회복과정의 값은 2.00eV로 결정되었다. 이 값들은 다른 연구결과에 비해 낮은 편인데 이 차이는 이 연구에서 사용된 압력용기강의 낮은 탄소양에 의한 것으로 생각된다. 또한 첫번째 회복과정의 반응차수는 1.78로 두번째 회복과정의 반응차수는 1.67로 결정되었다. 회복과정에서의 반응차수가 정수가 아닌 것은 한 회복과정에 1차나 2차의 반응차수를 가진 몇 가지 기구들이 복합되어 있기 때문인 것으로 생각된다. 이것은 양전자 소멸의 몇 가지 파라메타에 의한 결과를 뒷받침한다.

• 한국치위생학회지
• /
• 제5권2호
• /
• pp.131-145
• /
• 2005

There are normal inhabitants doing medically useful functions in the body. There are many kinds of bacteria performing specific functions in the oral cavity. Two strains of lactic add bacteria were isolated from normal inhabitants of children's oral cavity, which inhibited the production of volatile sulfur compounds by anaerobic bacteria. The authors identified the isolates by 16S rDNA partial sequencing. 1. Two isolates were Gram-positive bacilli and produced hydrogen peroxide. 2. When Streptococcus mutans was cultured in the media, the mean weight of formed artificial plaque on the orthodontic wires was $124.4{\pm}30.4$ mg, whereas being reduced to $5.2{\pm}2.0$ mg and $10.6{\pm}6.6$ mg in the media cultured with Streptococcus mutans and each isolate, respectively(p<0.05). 3. The number of viable cells of Streptococcus mutans was $3.4{\times}10^9$ per ml in the cultured solution, whereas those of Streptococcus mutans in the combined culture with each of isolates were $4.6{\times}10^8$ and $2.4{\times}10^8$ per ml. 4. The optical density was 1.286 in the supernatant of Fusoacterium nucleatum after vortexing for 30 minutes, whereas in the supernatant of combined Fusoacterium nucleatum and each isolate, they were reduced to 0.628 and 00497, which the percentages of coaggregation between them were 2904% and 57.8%, respectively. 5. The optical density of Fusoacterium nucleatum precipitate was 1.794 in the culture media containing cysteine and $FeSO_4$ being reduced to 1.144 and 0.915 in the coaggregated precipitates of Fusoacterium nucleatum and each isolate. 6. The similarity values of 16S rDNA sequence between each of isolates and Lactobacillus salivarius subsp. salicinius were 99.60% and 99.73%, respectively, meaning that isolates were Lactobacillus salivarius subsp. salicinius. These results indicated that two strains isolated from children's saliva, which inhibited the formation of plaque and the production of volatile sulfur compounds, were identified as Lactobacillus salivarius subsp. salicinius.

• 약학회지
• /
• 제3권1호
• /
• pp.4-9
• /
• 1957

Effects of antibioties on micro-organism have been reported by many scientists, such as Krampitz and Werkman, Fisher, Gale and Rodwell, Klimick Cavalito and Bailey, Umbreit, etc. On the mechanism by which penicillin act, Fisher(1947), Platt(1947), and Cavallito, considered that penicillin might act on bacteria by inhibiting with the normal function of SH-group of glutathione in the metabolism of the cell. Resenbrance of penicillin to gultathione in structure and the inactivation of penicillin by cysteine make us approve of the above inhibiting theory of SH-group. Galland (1947) and Schmidt (1947) reported that penicillin inhibited the activity of ribonuclease, Phosphatase, and mononucleotidase. Gale (1948) discovered that the gram positive bacteria had lost the power to uptake glutamic acid by ribonucleic acid in the medium contained penicillin: growth of gram positive organism was inhibited by the results that penicillin inhibited the uptake of amino acid byribonucleic acid, acting on ribonucleic acid of gram positive bacteria. Hotchkiss (1950) cultured S. aureus in the medium contained glucose and amino acids, and studied the effect of penicillin on protein synthesis. Peptide formation in living cells was inhibited by penicillin, while amono acid was utilized as before the addition of penicillin. On the otherhand, Binkley (1951) found penicillin interfered hydrolase of glutath one, and Hans (1950) reported penicillin inhibited the transpeptidation. On the machanism by which streptomycin acts. Cohen (1947) reported steptomycin made a irreversible complex with desoxyribonucleic acid, by the fact that desoxyribonucleic acid formed the precipitates with diguanide group of steptomycin. Zeller (1951) reported, on the other hand, streptomycin inhibited diamine oxidease. Geiger (1947) and Umbreit (1949) reported that steptomycin inhibited condensation of oxaloacetate and pyruvate in E. Coli and Oginsky et al (1949) reported steptomycin inhibited oxaloacetate-pyruvate reaction in Kreb's cycle. On the mechanism by which terramycin acts, Hahn & Wisseman (1951) reported that the formation of adaptive enzyme was inhibited by terramycin in E. Coli cultivated in the medium contained loctose, and that the protein synthesis was inhibited by terramycin. However, effects of antibiotics on amino acid metabolism have not been discussed much in spite of its important role in living cells. Especislly, effects of anitibiotics on higher plants have scarcely been reported. Here, to prove the effect of antibiotics on higher plants, and the mechanism by which, through amino acid metabolism, they promote or inhibit growth of plants, amino acids in bean plants treated with penicillin, streptomycin, and terramycin were analyzed by paper chromatography. And to clarify the antagonis of cysteine (as SH-group) against penicillin, through amino acid metabolism, amino acids in bean plants treated with cystene and penicillin, at the same time, were also analyzed.

• 대한금속재료학회지
• /
• 제49권8호
• /
• pp.628-634
• /
• 2011

SA508 Gr.4N Ni-Cr-Mo low alloy steel, in which Ni and Cr contents are higher than in commercial SA508 Gr.3 Mn-Mo-Ni low alloy steels, may be a candidate reactor pressure vessel (RPV) material with higher strength and toughness from its tempered martensitic microstructure. The inner surface of the RPV is weld-cladded with stainless steels to prevent corrosion. The goal of this study is to evaluate the microstructural properties of the clad interface between Ni-Cr-Mo low alloy steel and stainless weldment, and the effects of post weld heat treatment (PWHT) on the properties. The properties of the clad interface were compared with those of commercial Mn-Mo-Ni low alloy steel. Multi-layer welding of model alloys with ER308L and ER309L stainless steel by the SAW method was performed, and then PWHT was conducted at $610^{\circ}C$ for 30 h. The microstructural changes of the clad interface were analyzed using OM, SEM and TEM, and micro-Vickers hardness tests were performed. Before PWHT, the heat affected zone (HAZ) showed higher hardness than base and weld metals due to formation of martensite after welding in both steels. In addition, the hardness of the HAZ in Ni-Cr-Mo low alloy steel was higher than that in Mn-Mo-Ni low alloy steel due to a comparatively high martensite fraction. The hardness of the HAZ decreased after PWHT in both steels, but the dark region was formed near the fusion line in which the hardness was locally high. In the case of Mn-Mo-Ni low alloy steel, formation of fine Cr-carbides in the weld region near the fusion line by diffusion of C from the base metal resulted in locally high hardness in the dark region. However, the precipitates of the region in the Ni-Cr-Mo low alloy steel were similar to that in the base metal, and the hardness in the region was not greatly different from that in the base metal.

• 대한치과재료학회지
• /
• 제43권4호
• /
• pp.343-349
• /
• 2016

This experiment was carried out to examine whether the post-firing heat treatment is effective in increasing the hardness of metal-ceramic alloy of the Pd-Au-Ag-Sn system. Precipitation hardening by holding at $600^{\circ}C$ after simulated complete porcelain firing in a metal-ceramic alloy of the Pd-Au-Ag-Sn system was examined by observing the change in hardness, crystal structure, and microstructure using a hardness test, X-ray diffraction (XRD), and field emission scanning electron microscopy (FE-SEM). The hardness of the alloy increased apparently by holding the specimen at $600^{\circ}C$ for 30 min after simulated complete porcelain firing. The formation of fine grain interior precipitates during holding at $600^{\circ}C$ caused the formation of lattice strain in the grain interior, resulting in apparent hardening. The faster cooling rate (stage 0) during simulated complete porcelain firing resulted in more effective precipitation hardening during holding at $600^{\circ}C$. From the above results, an appropriate post-firing heat treatment, such as holding at $600^{\circ}C$ for 30 min after complete porcelain firing may increase the durability of metal-ceramic prostheses composed of Pd-Au-Ag-Sn alloy.

• 자원환경지질
• /
• 제40권4호
• /
• pp.491-496
• /
• 2007

본 연구는 구과상암 형성의 원리로 알려진 리제강 현상을 화학적으로 실험하여 분석한 것으로 매질의 종류에 따라, 또한 내부전해질과 외부전해질이 바뀌었을 때 같은 리제강 링의 형태가 다르게 나타났다. 매질의 종류로는 한천, 젤라틴, 청포묵을 사용하였으며 한천은 1%, 젤라틴은 2%, 그리고 청포묵은 5%를 포함하여 0.01M 내부전해질 용액을 만들어 12시간동안 실온에서 굳혔을 때 외부전해질의 확산을 실험하기에 적절한 점성도를 유지하였으며 리제강 고리가 각 화학성분의 특성에 따라 선명하게 형성되는 현상을 볼 수 있었다. 용해도곱상수($K_{sp}$)가 $7.9{\times}10^{-9}$는 내부전해질 0.01M KI와 외부전해질 25% $Pb(NO_3){_2}$가 반응하여 생성한 리제강 링 간격이 0.01cm에서 0.12cm로 좁지만 점점 커지는 반면, 가 $8.3{\times}10^{-17}$는 내부전해질 0.01M KI와 외부전해질 25% $AgNO_3$이 반응하여 생성한 리제강 링간 간격은 0.7cm에서 0.45cm로 점점 작아지는 것으로 보아 화학적으로 리제강 링의 생성에서 링 간의 간격이나 전체 링의 생성 크기는 침전 물질의 용해도곱상수와 상관관계가 있는 것으로 나타났다.

• 한국분말재료학회지
• /
• 제13권3호
• /
• pp.178-186
• /
• 2006

The effect of use of $H_2O$ as PCA(process control agent) to prevent the carbon contamination during mechanical alloying process and the precipitation behavior in Ni-20Cr-20Fe-5Nb bulk alloy after aging were investigated. NbC and $Cr_2O_3$ were formed during mechanical alloying and consolidation processes in the Ni-20Cr-20Fe-5Nb alloy in which methanol($CH_3OH$) was added as PCA. Formation of NbC in this alloy decreased the amount of Nb dissolved in the Ni matrix. The use of $H_2O$ as PCA in Ni-20Cr-20Fe-5Nb alloy prevented the formation of NbC and increased the hardness. The increase of hardness in this alloy was attributed to the increased amount of Nb dissolved in the Ni matrix. After aging treatment for 20 hours at $600^{\circ}C\;and\;720^{\circ}C$ of Ni-20Cr-20Fe-5Nb bulk alloy in which $H_2O$ added as PCA, ${\gamma}"$$(Ni_3Nb,\;tetragonal)\;and\;{\delta}\;(Ni_3Nb,\;orthorhombic)$ precipitates were formed, respectively. The precipitation temperatures of ${\gamma}"$ and ${\delta}$ in this bulk alloy were lower than those in commercial IN 718 alloy. It seemed that the lower precipitation temperatures for ${\gamma}"$ and ${\delta}$ in this bulk alloy than in commercial IN 718 alloy were due to severe plastic deformation during mechanical alloying.