• Journal of the Korean Society of Combustion
• /
• v.9 no.1
• /
• pp.18-24
• /
• 2004

Synthesis of carbon nanomaterials on a metal substrate by an ethylene fueled inverse diffusion flame was illustrated. Two stainless steel plates coated with $Ni(NO_3){_2}$ were folded with each other and used as a catalytic metal substrate. Carbon nanotubes and nanofibers with diameters of 20 - 60nm were found on the substrate. From the TEM-EDS analyses, most of the nanomaterials turned out to be Nicatalyzed. Carbon nanotubes were formed on the substrate in the region ranging from about 1,400K to 900K. The formation mechanisms of nanotubes and nanofibers were similar. The synthesis temperature of the nanofibers was lower than that of the nanotubes. The higher synthesis temperature of nanotubes might enhance the activity of the catalyst metal and produce more condensed carbons. The accumulated graphite layers led to form compartments to release the compressive stress in the layers. The growth of carbon nanotubes was bamboo-shaped showing compartments in the inside hollow. The distances between those compartments represented the growth rate that depended on the synthesis temperature.

• Mycobiology
• /
• v.29 no.1
• /
• pp.19-26
• /
• 2001

Defense mechanisms against anthracnose disease caused by Colletotrichum orbiculare on the leaf surface of cucumber plants after pre-treatment with plant growth promoting rhizobacteria(PGPR), amino salicylic acid(ASA) or C. orbiculare were compared using a fluorescence microscope. Induced systemic resistance was mediated by the pre-inoculation in the root system with PGPR strain Bacillus amylolquefaciens EXTN-1 that showed direct antifungal activity to C. gloeosporioides and C. orbiculare. Also, systemic acquired resistance was triggered by the pre-treatments on the bottom leaves with amino salicylic acid or conidial suspension of C. orbiculare. The protection values on the leaves expressing SAR were higher compared to those expressing ISR. After pre-inoculation with PGPR strains no change of the plants was found in phenotype, while necrosis or hypersensitive reaction(HR) was observed on the leaves of plants pre-treated with ASA or the pathogen. After challenge inoculation, inhibition of fungal growth was observed on the leaves expressing both ISR and SAR. HR was frequently observed at the penetration sites of both resistance-expressing leaves. Appressorium formation was dramatically reduced on the leaves of plants pre-treated with ASA, whereas EXTN-1 did not suppress the appressorium formation. ASA also more strongly inhibited the conidial germination than EXTN-1. Conversely, EXTN-1 significantly increased the frequency of callose formation at the penetration sites, but ASA did not. The defense mechanisms induced by C. orbiculare were similar to those by ASA. Based on these results it is suggested that resistance mechanisms on the leaf surface was different between on the cucumber leaves expressing ISR and SAR, resulting in the different protection values.

• The Korean Journal of Ecology
• /
• v.18 no.1
• /
• pp.189-201
• /
• 1995

In order to clarify regeneration processes and mechanisms of the disturbed Pinus densiflora forest, responses of Pinus densiflora to gap formed by disturbance were analysed by growth of saplings and mature and growth equations were obtained from branch growth of mature trees and height growth of saplings, and age distribution of saplings and young trees recruited within gap was analysed in relation to gap age. Height growth of saplings within gaps was accelerated after gap formation. Such abrupt increases of growth of saplings after the gap formation might be resulted in the difference of growth of saplings between gap and non-gap areas. In fact, height and diameter of saplings in the central part of gap were larger than those of saplings in marginal parts of gap and non-gap area. However, density of saplings was not different in both parts. In addition, growth of annual rings of mature trees bordering on gap also increased after gap formation. Branch growth of mature trees bodering on gap was 6.3 - 6.5 cm /year and the mean radius of gaps created by death of only one canopy tree was about 3 m. Therefore, for those gaps to be closed by branch growth it will take 46 years. Growth of saplings within gap showed exponential equation. Fifty years will be required for the saplings to enter the forest canopy by the exponential growth equation. Therefore, gap created by only one tree might be closed by branch growth of surrounding canopy trees in advance of being done by height growth of saplings. But gaps created by death of trees more than 2 will be closed by the growth of saplings. Among the regenerating saplings and young trees within gaps, individuals established in advance of gap formation were more than those established after the gap formation. From these results, it was assumed that the disturbed Pinus densiflora forests in these sites were regenerated by height growth of saplings recruited in advance of gap formation.

• Development and Reproduction
• /
• v.4 no.2
• /
• pp.137-145
• /
• 2000

The regulatory mechanisms of the initiation and the formation of ovarian follicles during fetal stage of mammals are largely unknown. In addition to the gonadotropins secreted from pituitary, various growth factors, and steroid hormones are believed to be involved in the differentiation and initiation of growth of primordial follicles consisting of primordial germ cells migrated from yolk sac and streamed cells from mesonephric somatic cells. In human, primordial follicles that have already initiated differentiation at fetal stage undergo either folliculogenesis to ovulate or atresia after growth. Some of primordial follicles remain without growth for 50 years or longer. The objective of this paper is to review the mechanism of the formation, growth arrest, and initiation of primordial follicles in human fetal and neonatal ovaries.

• International Journal of Computer Science & Network Security
• /
• v.22 no.1
• /
• pp.206-212
• /
• 2022

The main purpose of the article is to study the peculiarities of the formation of information support mechanisms for economic growth and security under the influence of COVID-19. The cyclical nature of economic growth is a well-established and proven fact. In this context, one of the main tasks of the state is to develop measures to mitigate the impact of economic crises on the entire economic system of the state, individual economic entities, as well as to introduce anti-crisis mechanisms and tools to support the economy. When the cyclical nature of economic crises coincides with destabilizing processes in society, such as natural disasters, military actions or epidemics, the role of the state and adequate information support for economic growth is sharply actualized. As a result, an analysis was made of the main aspects of information support for economic growth and security in the context of COVID-19.

• Korean Journal of Materials Research
• /
• v.12 no.6
• /
• pp.482-487
• /
• 2002

A $TiO_2$ film for photocatalyst was prepared by anodic oxidation at 180V in acidic electrolyte and film formation mechanism was studied. The major part of anodic $TiO_2$ film consisted of anatase type structure and surface morphology exhibited a porous cell structure. The thickness growth rate of the oxide film with anodization time revealed two-stage slope corresponds to the surface morphology between anodic films. The growth of pores on cell structure and the growth rate of film with two-stage slope are related to the constant formation rate of the $TiO_2$ layer.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.26 no.6
• /
• pp.817-822
• /
• 2002

Sooting characteristics of counterflow ethylene/propane mixture flames have been experimentally studied to investigate the fuel structure effect on PHM and soot formation. Laser-induced incandescene and laser-induced fluorescene techniques were employed to measure soot volume fraction and polycyclic aromatic hydrocarbon (PAH) concentration, respectively. Importance of $C_{3-}$species on PAH growth as well as the H-abstraction-C$_2$ $H_2$addition (HACA) mechanism has been emphasized, considering that PAH growth rate is greater for with mixed fuel than fer pure fuel flames. It was also confirmed that HACA pathways are the dominant soot growth mechanism. A new PAH growth model including both $C_{2-}$ and $C_{3-}$growth mechanisms is proposed based on the experimental results.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.1 no.1
• /
• pp.66-73
• /
• 1991

During the growth of macroscopically dislocation-free Czochralski silicon crystal, micro precipitates causing stacking faults in the silicon wafer during the oxidation are formed Thermal history the cryscausing acquire during the growth process is known to be a key factor determining the nucleation of this micro precipitates. In this article, various mechanisms suggested on the formation of microdefects in the silicon crystal are reviewed to secure the nucleation mechanism of the micro precipitates causing OSF whose pattern is normally ring or annular in CZ silicon crytal. B-defects which are known as vacancy clustering are considered to be the heterogeneous nucleation sites for the micro precipitates causing OSF in the CZ silicon crystals.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.34 no.3
• /
• pp.250-265
• /
• 2008

Distraction osteogenesis is a well-established clinical treatment for limb length discrepancy and skeletal deformities. Appropriate mechanical tension-stress is believed not to break the callus but rather to stimulate osteogenesis. In contrast to fracture healing, the mode of bone formation in distraction osteogenesis is primarily intramembranous ossification. Although the biomechanical, histological, and ultrastructural changes associated with distraction osteogenesis have been widely described, the basic biology of the process is still not well known. Moreover, the molecular mechanisms in distraction osteogenesis remain largely unclear. Recent studies have implicated the growth factor cascade is likely to play an important role in distraction. And current reserch suggested that mechanical tension-stress modulates cell shape and phenotype, and stimulates the expression of the mRNA for bone matrix proteins. The purpose of this study is to examine the pattern of expression of growth factors($TGF-{\beta}1$, IGF-I, bFGF) and extracellular matrix proteins(osteoclacin, osteonectin) related to osteogenesis by osteodistraction of the mandible in rabbits. 24 rabbits is used for this experiment. Experimental group are gradual distraction(0.7mm, twice/day), acute distraction(1.4mm, twice/day) and control group is only osteotomized. After 5 days latency, osteotomic site is distracted for each 7 days and 3.5 days. Consolidation period is 28 days. The animal is sacrificed at the 3th, 7th, 14th, 28th. The distracted bone is examined by immunohistochemical analysis and RT-PCR analysis. The results obtained from this study were as follow : No significant difference was found on clinical examination according to distraction rate, but gradual distraction was shown to improve regenerate bone formation on radiographic and histologic examination. Growth factors and extracelluar matrix proteins expression increased in distraction group than control group. From these results, it could be stated that graudal distraction is shown to improve and accelerate bone formation and mechanical stress like distraction has considerable effects on osteogenesis related factors. And rabbit is the most appropriate animal model for further reseach on the molecular mechanisms that mediate osteodistraction. It is believed that understanding the biomolecular mechanisms that mediate distraction osteogenesis may guide the development of targeted strategies designed to improve distraction osteogenesis and accelerate bone healing.

• 한국연소학회:학술대회논문집
• /
• 1995.06a
• /
• pp.91-103
• /
• 1995

In recent years, significant advances have been made in the development of methods to predict ash behavior in utility boilers. This paper provides an overview of methods used to assess and predict ash formation and deposition. It has discussed some of the key problems associated with the formation and deposition of ash during the combustion of pulverized coal. Although considerable progress has been made in understanding of the fundamental mechanisms of ash formation, transport, growth, and strength development, there is still much work to be done. There is a need to develop quantitative relationships between the characteristics of the entrained ash and the physical properties of ash deposits that influence deposit growth, strength development, and cleanability. Also data from bench-scale, pilot-scale, and full-scale units are needed in order to determine operating conditions which will minimize deposition problems, maximize efficiency, and reduce emissions.