• The Journal of Asian Finance, Economics and Business
• /
• 제7권12호
• /
• pp.677-682
• /
• 2020

To investigate the nexus between urban population, gross capital formation, and economic growth in the Kingdom of Saudi Arabia, yearly data was collected from the World Bank for the period 1974- 2018. Basic statistics test and correlation matrix was used to investigate the causal effect among the tested parameters, followed by Augmented Dickey-Fuller (ADF) stationary test, co-integration analysis by Johansen test after that Vector Auto-Correction Model for both short-run and long-run and finally the Granger-Causality tests. Result of unit root test analysis shows that the urban population became stationary at I (0) level while economic growth and gross capital formation became stationary at I (1). Johansen co-integration analysis indicates that there is presence of both long-run and short-run relationship between the three variables in the Kingdom of Saudi Arabia. The result of the VECM Model reflects that both economic growth and gross capital formation have a negative impact on urban population in the short run. According to the Granger-Causality tests, there is unidirectional causality with the urban population by both gross capital formation and economic growth. Also, the result of the Granger Causality tests show that there is unidirectional causality between economic growth and gross capital formations.

• 한국환경과학회지
• /
• 제13권7호
• /
• pp.667-674
• /
• 2004

The objective of this study was to investigate the effects of pH and temperature on the formation of bromate, which is ozonation by-products, during ozonation. In this experiment, the operating parameters including pH 3 ～ 10 and temperature 15 ～ $30^{\circ}C$ were studied. Through the study for the bromate formation, reaction rate constant, and ozonation effect index on pH and temperature, the results obtained are as follows. At the same initial pH condition, the increase of pH shown similar trends even if the reaction variables such as temperature and reaction time of ozonation were exchanged. As pH and temperature were increasing, the bromate concentration was increased but bromine(HOBr+OBr) was decreased with increasing pH from 3 to 10. The activation energy(J/mol) for bromate formation decreased with increasing pH. The rate constants of bromate formation for the reaction of ozone and bromide, and ozone dosage coefficient$(K_{0})$ increased with temperature and pH. Ozonation effect index(OI) decreased with increasing temperature and pH.

• 천문학회보
• /
• 제39권2호
• /
• pp.71.2-71.2
• /
• 2014

processes at the origin of the star formation in the galaxies over the last 10 billions years. While it was proposed in the past that merging of galaxies has a dominant role to explain the triggering of the star formation in the distant galaxies having high star formation rates. In the opposite, more recent studies revealed scaling laws linking the star formation rate in the galaxies to their stellar mass or their gas mass. The small dispersion of these laws seems to be in contradiction with the idea of powerful stochastic events due to interactions, but rather in agreement with the new vision of galaxy history where the latter are continuously fed by intergalactic gas. I was especially interested in one of this scaling law, the relation between the star formation (SFR) and the stellar mass (M*) of galaxies, commonly called the main sequence of star forming galaxies. I have studied this main sequence, SFR-M*, in function of the morphology and other physical parameters as the radius, the colour, the clumpiness. The goal was to understand the origin of the sequence's dispersion related to the physical processes underlying this sequence in order to identify the main mode of star formation controlling this sequence. This work needed a multi-wavelength approach as well as the use of galaxies profile simulation to distinguish between the different galaxy morphological types implied in the main sequence.

• Corrosion Science and Technology
• /
• 제19권4호
• /
• pp.174-188
• /
• 2020

Atmospheric corrosion is a natural surface degradation process of metal due to changes in environmental parameters in the surrounding atmosphere. It is very sensitive to environmental parameters such as temperature, relative humidity, sulphur dioxide, and chloride, making it a major global economic challenge. Existing forecasting empirical corrosion models including the ISO standard are based on statistical analysis of experimental studies without considering the behavior of atmospheric parameters. The present study proposes a reliable global empirical model for estimating short and long-term atmospheric corrosion rates based on environmental parameters and corrosion mechanisms obtained from a parametric study. Repercussion of atmospheric corrosion rate due to individual and combined influences of environmental parameters specifies their importance in the estimation. New global empirical coefficients obtained for environmental parameters are statistically established (R² =0.998) with 95% confidence limit. They are validated using experimental datasets of existing studies observed at 88 different continental locations. The current proposed model can predict atmospheric corrosion by means of corrosion formation mechanisms influenced by combined effects of environmental parameters, further abating applicability limitations of location and time.

• 대한화학회지
• /
• 제10권2호
• /
• pp.103-108
• /
• 1966

The effect of temperature on the critical micelle concentration of dodecylpyridinium chloride has been determined by electrical conductance method over the range from $5^{\circ}C\;to\;50^{\circ}C$. The values of the change in heat content, ${\Delta}H_m$, and the other thermodynamic parameters have been estimated using the equation of temperature dependence on the critical micelle concentration for the same temperature range. The significance of these thermodynamic quantities and their relations to the various current theories of micelle forming processes were discussed.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.210-213
• /
• 1995

In this study,the effect of both process parameters (wheel velocity, friction coefficients between die and billet, etc) and die-shape (abutment height and shape, flash gap, etc.) on the surface defect on forming process is theoretically investigated. For this work, computer simulation was performed by using the DEFORM, a commercial FEM code. Through numerous simulations with different parameters and die shapes, We propose one optimal die shape for CONFORM process which can remove surface defect.

• 한국공작기계학회논문집
• /
• 제11권3호
• /
• pp.72-79
• /
• 2002

Though the laser cutting process is increasingly used in industry, a process automation and systematic database is still yet to be developed. In this study, as the fundamental step toward the construction of a reliable process expert system, a laser cutting quality monitoring/analysis system is developed based on simulations and experimental results. The relations between laser process parameters and laser cutting surface quality parameters such as kerf geometry, striation, surface roughness and dross formation are characterized and analyzed. A graphical user interface is used to visualize the results.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.567-570
• /
• 2007

Cell gap dependence on anisotropic phase separation was studied. The results showed that the morphology of phase separation depended on cell gap and material parameters. With numerical simulation and experiments, the optimal range of cell gap in the formation of polymer layer and liquid crystal was suggested for given material parameters.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.9-16
• /
• 2000

A survey over the role of sol-gel processing and metal alkoxides in the thin film preparation is given. The basic chemistry of the sol-gel process is complex due to the different reactivities of the network forming and the wide variety of reaction parameters. Despite the important progress in the investigations of the mechanisms of thin film formation, a direct relation of reaction parameters to functional oxide properties is still very difficult.

• 한국전자파학회논문지
• /
• 제18권8호
• /
• pp.997-1004
• /
• 2007

고해상도 레이다 영상은 탑재체 및 플랫폼 등 시스템 설계 변수에 비교적 민감할 수 있다. 본 논문에서는 시스템 파라미터 기반의 2차원 SAR 영상 형성 및 영상 품질 분석을 위한 시뮬레이터를 구현하였다. 본 논문에서 구현한 시뮬레이터는 유연성과 확장성을 고려하여 주요 모듈로 구성하고 Matlab코드를 이용하여 GUI 기반으로 구성하였다. 주요 기능은 SAR 시스템 설계 파라미터를 이용하여 SAR 신호를 생성할 수 있으며, RDA(Range-Doppler Algorithm)을 이용하여 영상을 형성하고 SAR시스템 파라미터가 영상의 질에 미치는 영향을 다양하게 분석할 수 있다. 특히, 본 시뮬레이터는 시스템 환경에 따라 파라미터 설정을 용이하게 할 수 있으므로 항공기 및 위성 탑재체 등의 SAR 시스템 설계와 SAR 영상 품질 분석에 효과적으로 활용할 수 있다.