• Particle and aerosol research
• /
• v.8 no.4
• /
• pp.161-172
• /
• 2012

Three-dimensional numerical simulation using a computational fluid dynamics (CFD) was carried out in order to investigate the formation and dispersion of the plume discharged from the stack of a thermal power station. The simulation was based on the standard ${\kappa}{\sim}{\varepsilon}$ turbulence model and a finite-volume method. Warm and moist exhaust from a power plant stack forms a visible plume as entering the cold ambient air. In the simulation, moisture content, emission velocity and temperature of the flue gas, air temperature and wind speed were dealt with the main parameters to analyze the properties of the plume composed mainly of water vapor. As a result of the simulation, the plume could be more apparent in cold winter due to a big difference of latent heat capacity. At no wind condition, the white plume rises 120 m upward from the top of the stack, and expands to 40 m around from the stack in cold winter after flue gas heat recovery. The influencing distance of relative humidity will be about 100 m to 400 m downstream from the stack with a cross wind effect. The decrease of flue gas temperature by heat recovery of thermal energy facilitates the formation of the plume and restrains its dispersion. Wind speed with vertical distribution affects the plume dispersion as well as the density.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.18 no.3
• /
• pp.270-278
• /
• 2009

Friction stir welding is a relatively new solid state joining process. A6061-T6 and A5052-H32 aluminium alloy has gathered wide acceptance in the fabrication of light weight structures requiring a high strength to weight ratio and good corrosion resistance. This friction stir process uses a non-consumable tool to generate frictional heat in the abutting surfaces. The welding parameters such as tool rotational speed, welding speed, etc., and tool pin profile play a major role in deciding FSP zone formation in A6061-T6 and A5052-H32 aluminium alloy. Three different tool pin profiles have been used to fabricate the dissimilar butt joints. The formation of friction stir processed zone has been analysed macroscopically. Tensile properties of the joints have been evaluated and correlated with the friction stir processed zone formation.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.28 no.4
• /
• pp.379-383
• /
• 2014

The purpose of this study is to investigate the effects of silkworm extracts (SWE) on reactive oxygen species formation in mice (C57BL/6). Mice were administrated intraperitoneally with SWE (20 mg/kg/day) for 14 days. All animals were sacrificed 24 hours after the last SWE treatment and then extracted the blood and brain tissue in mouse. The researcher measured several parameters related to reactive oxygen species formation, malondialdehyde (MDA) and hydrogen peroxide ($H_2O_2$) contents in serum, whole brain, cerebral cortex and cerebellum. The results showed that MDA content of pre-SWE treatment was decreased significantly in serum, mitochondrial and cytosolic fraction of whole brain and cerebellum (P<0.01). The $H_2O_2$ content of pre-SWE treatment was decreased significantly in mitochondrial fraction of whole brain, cerebral cortex and cerebellum (P<0.01). These results suggest that SWE plays an important role for inhibition of oxidative damage of cells as well as antioxidant effect, aging delay and cells protected from irradiation.

• Bulletin of the Korean Chemical Society
• /
• v.26 no.4
• /
• pp.614-618
• /
• 2005

The complex of the composition LaL(N$O_3)_3\;(H_2O)_2$ is prepared by the reaction of La($NO_3)_3{\cdot}6H_2O$ with Nethylmorpholine in aqueous medium. The ligand is involved in the complex as a neutral species where the chelation occurs via the oxygen of the ligand moiety and the nitrate groups as bidentate ligand. The chemical structure of the studied complex is confirmed through IR, XRD, and thermal analysis data. The complexation equilibria of La(III) with N-ethylmopholine is studied in aqueous medium at ionic strength I = 0.1 mol${\cdot}dm^{-3}\;KNO_3$ and at 25, 35 and 45 ${^{\circ}C}$, respectively. The thermodynamic parameters $\Delta$G, $\Delta$H and $\Delta$S values were calculated to prove the association with the complex formation. It is clearly observed that the process is accompanied by absorption of heat, i.e. endothermic process, while the entropy does not change greatly attributed to the release of constant number of water molecules during chelate formation.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.22 no.3
• /
• pp.267-279
• /
• 1998

A numerical study was made of flow behind a circular cylinder in a uniform flow, where the cylinder was rotationally oscillated in time. The temporal behavior of vortex formation was scrutinized over broad ranges of the two externally specified parameters, i.e., the dimensionless rotary oscillating frequency (.110.leq. $S_{f}$.leq..220) and the maximum angular amplitude of rotation (.theta.$_{max}$=15 deg., 30 deg. and 60 deg.). The Reynolds number (Re= $U_{{\inf}D}$.nu.) was fixed at Re=110. A fractional-step method was utilized to solve the Navier-Stokes equations with a generalized coordinate system. The main emphasis was placed on the initial vortex formations by varying $S_{f}$ and .theta.$_{max}$. Instantaneous streamlines and pressure distributions were displayed to show the vortex formation patterns. The vortex formation modes and relevant phase changes were characterized by measuring the lift coefficient ( $C_{L}$) and the time of negative maximum $C_{L}$( $t_{-C}$$_{Lmax}$) with variable forcing conditions.s.tions.s.s.s.

• Journal of Korean Society of Water and Wastewater
• /
• v.27 no.6
• /
• pp.751-759
• /
• 2013

This study is carried out to get the basic design parameters for phospate removal facilites from wastewater by Tobermolite. The phosphate removal by the apatite formation on the surface was affected by several important factors, temperature, ions present in wastewater stream, contact time, recirculation rate, and etc. In case of the temperature, with the increase of temperature, the apatite formation was accelerated. When temperature increased from $15^{\circ}C$ to $35^{\circ}C$, removal efficiency of phosphate increased from 83 % to 93 %. An increase of calcium and fluoride ion content increase the apatite formation, however, bicarbonate and magnesium ion inhibited the crystallization of apatite. As expected, when the recirculation rate was increased from 1 Q to 3 Q, at EBCT (Empty Bed Contact Time) 60min enhanced removal efficiency was observed. The more the recirculation rate increased, the more the removal efficiency increased. According to the results of column experiment using an actual wastewater with low and high phosphate concentration (5 mg/L and 50 mg/L-P), the removal efficiency was 77 % at EBCT of 45 min, and 80 % at 60 min. It was suggested that optimum EBCT was 45 min.

• Journal of Veterinary Clinics
• /
• v.19 no.4
• /
• pp.405-410
• /
• 2002

The purpose of this investigation was to examine the effects of osteocalcin (serum bone GLA-protein, BGP) and procollagen carboxy-terminal propeptide (PICP) on new bone formation of canine fracture models. Serum osteocalcin and PICP were measured by standard RIA. The values of osteocalcin and PICP in the non-union and delayed-union fracture models were measured biweekly for 20 weeks in 14 dogs. The unions were radiographed for fracture healing. In non-union fracture group, the activity of BGP was markedly increased at four to eight weeks and decreased at twelve to twenty weeks and the activity of PICP was markedly increased at two to six weeks and slightly decreased at sixteen to twenty weeks. In delayed-union fracture group, the activity of BGP was markedly increased at two to eight weeks after treatment and maintained for the level until twenty weeks and the activity of PICP was markedly increased at two to six weeks after treatment and maintained for the level until twenty weeks. Radiologically, non-union group was not achieved until twenty weeks after fracture, delayed-union group was successfully achieved in eighteen weeks after fracture. These results suggested that the. activities of osteocalcin and PICP are useful parameters for biochemical markers of bone formation in dogs.

• The Bulletin of The Korean Astronomical Society
• /
• v.39 no.1
• /
• pp.83.1-83.1
• /
• 2014

Open clusters consisting of a co-spatial and coeval population with a similar chemical composition are a superb astrophysical test bed in both stellar and galactic astronomy. We introduce not only several scientific issues relating to these objects but also comprehensive studies of the two young open clusters Westerlund 1 and IC 1848 formed in extremely different star-forming conditions. Westerlund 1 is known as the most massive starburst cluster in the Galaxy. Located in the Scutum-Centaurus spiral arm, the cluster is relatively close to the Galactic Center. The apparent surface density is very high. On the other hand, IC 1848 is a core cluster within the large-scale star-forming region W5 lying in the Perseus arm. Unlike Westerlund 1, IC 1848 with a putatively low metallicity exhibits a low surface density. We present the fundamental parameters of those young clusters, such as reddening, distance, and age, obtained from the broadband photometric analysis. The stellar initial mass function (IMF) of the clusters is used to investigate the effects of the different star-forming conditions on the star formation activity. With the results of previous studies for several young open clusters, our preliminary results support a possibility that star formation activity may be affected by the environmental factors or the initial condition of natal clouds. In addition, we shortly discuss the age scale and spread of pre-main sequence stars to understand the formation processes of star clusters.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.17 no.4
• /
• pp.22-28
• /
• 2008

Friction stir welding(FSW) is an relatively new solid state joining process. A1606l-T6 aluminium alloy has gathered wide acceptance in the fabrication of light weight structures requiring a high strength to weight ratio and good corrosion resistance. This friction stir process(FSP) uses a non-consumable tool to generate frictional heat in the abutting surfaces. The welding parameters such as tool rotational speed, welding speed, etc., and tool pin profile playa major role in deciding FSP zone formation in A16061-T6 aluminium alloy. Tow different tool pin profiles have been used to fabricate the joints. The formation of friction stir processed zone has been analysed macroscopically. Tensile properties of the joints have been evaluated and correlated with the friction stir processed zone formation.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.30A no.6
• /
• pp.38-48
• /
• 1993

A recessed n-p Juction diode with the self-aligned sturcture is proposed and fabricated by using the polysilicon as an n$^{+}$ diffusion source. The diode structure can be applicable to the emitter-base formation of high performance bipolar divice and the n$^{+}$ polysilicone mitter has an important effect on the device characteristics. The considered parameters for the polysilicon formation are the deposition condition. As$^{+}$ dose for the doping of the polysilicon and the annealing condition using RTP system. The vertical depth profiles of the fabricated diode are obtained by SIMS and the electrical characteristics are analyzed in terms of the ideality factor of diode (n), contact resistance and reverse leakage current. In addition, n$^{+}$-p junction diodes are formed by using the amorphous silicon (of combination of amorphous and polysiliocn) instead of polysilicon and their characteristics are compared with those of the standard sample. The As$^{+}$ dose for the formation of good junction is about 1~2${\times}10^{16}cm^{2}$ at given RTA conditions (1100.deg. C, 10sec).