• 한국환경과학회지
• /
• 제13권3호
• /
• pp.297-300
• /
• 2004

We have been proposed model equation which is able to predict the trihalomethane producing concentration formation, that is one of byproduct, in the water treatment processes. In proposed model, the effects of trihalomethane factors like chlorine contact time, pH, temperature, TOC and UV-254 are considered. The concentration of the trihalomethane produced is proportion to the contact with chlorine, pH of water, temperature of water TOC and UV-254, respectively. This proposed model could be predicted the formed concentration of trihalomethanes by trihalomethane factors.

• 한국조리학회지
• /
• 제14권4호
• /
• pp.456-468
• /
• 2008

This paper analyzes how the service quality affects customer satisfaction and loyalty, focusing on a franchise restaurant company 'Wonhalmoney Bossam'. The result shows that store locations and food cost of the menu, as an additional quality formation factor, influence customer satisfaction and loyalty rather than the main quality formation factors. This study strongly suggests the marketing preparation of menu price and the choice of locations are most significant as an additional factor. Therefore, Korean food restaurants should develop their marketing strategies from the customer's point of view, and reasonable price setting and menu selection with appropriate location will create customer satisfaction and revisit.

• 한국환경과학회지
• /
• 제14권10호
• /
• pp.965-972
• /
• 2005

This research studied the effect of factors that are able to form disinfection by-products (DBPs) of chlorination, including natural organic matter (NOM) with sewage, bromide ions, pH and contact time. Trihalomethane (THMs) yield of $0.95{\mu}mol/mg$ was higher than other DBPs yield for the chlorinated humic acid samples. THMs yield of sewage sample was $0.14{\mu}mol/mg$ and haloacetonitriles (HANs) yield in the sewage samples were $0.13{\mu}mol/mg$ but only $0.02{\mu}mol/mg$ for the humic acid samples. As the concentration of bromide ions increased, brominated DBPs increased while chlorinated DBPs decreased, because bromide ions produce brominated DBPs. THMs were highest $(55.55{\mu}g/L)$ at a pH of 7.9 and haloacetic acids (HAAs) were highest $(34.98{\mu}g/L)$ at a pH of 5. Also THMs increased with increasing pH while HAAs decreased with increasing pH. After chlorination, the rate of THMs and HAA formation are faster at initial contact time and then reaches a nearly constant value after 24 hours. This study considers ways to reduce DBP formation by chlorination.

• 산경연구논집
• /
• 제10권7호
• /
• pp.59-69
• /
• 2019

Purpose - Unlike in the past, individualistic thought is more dominant than groupism where members prioritize organizations. Such changes run counter to the direction of the survival of the companies, which calls for companies to explore strategies to address thems. As one of the solutions, many people highlights social capital. However, since most studies have been conducted on the definition and characteristics of social capital, there is not enough prior factor research on the formation of social capital. So the current situation require researches on the formation of social capital. Research design, data, and methodology - To achieve the purpose, the literature and the empirical studies were combined. Deriving workplace democracy and servant leadership as factors affecting the formation of social capital through the literature, and this factors have modeled assumptions about the impact on social capital, and have established hypotheses to verify them. The survey which is conducted to verify the hypothesis and questionnaires are derived base on the variables used in the previous studies. The survey was conducted 447 respondents in Korea. Results - As a result, we found that the workplace democracy is positively functioning with the formation of social capital. It means that the democracy functions as a universal element to enhance the quality of social capital at the workplace. The evidence also shows that the positive impacts of the servant leadership on the formation of social capital. And the survey shows that groups with high level servant leadership had a higher impact on the formation of social capital than those with low levels leadership. Conclusions - At present, the social capital has become an important factor for the companies pursuing high performance workplaces. We found that the workplace democracy and the servant leadership affect the formation of social capital. It means that to increase the employees' sense of community and solidarity, it is need to form democratic environment with the servant leadership. Therefore, based on the results of this study, the workplace democracy and the servant leadership can present strategic implications that can increase the social capital.

• 한국항공운항학회지
• /
• 제24권2호
• /
• pp.19-24
• /
• 2016

Positional stability analysis based on aerodynamic forces and induced moments of formation flight using two small aircraft models is presented. The aerodynamic force and moments of the trailing aircraft are analyzed in the aspect of flight stability. The induced moments with the change of local flow direction by wing-tip vortex from the leading aircraft can affect the flight positional stability of aircraft in closed formation flight. Aerodynamic forces and moments of trailing aircraft model are measured by 6-component internal balance at the 49 locations with vertical and lateral space between two aircraft models. Results are shown that the positional stability of trailing aircraft in formation flight can be analyzed by positional stability derivatives with vertical and lateral space. It is concluded that flying positions can be important factors for aircraft position stability due to induced aerodynamic force and moments with vertical and lateral spacing by the variation of flow pattern from the leading aircraft in formation flight.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 1995년도 춘계공동학술대회논문집; 전남대학교; 28-29 Apr. 1995
• /
• pp.122-129
• /
• 1995

This paper presents a similarity coefficient based approach to the problem of machine-part grouping for cellular manufacturing. The method uses relevant production data such as part type, production volume, routing sequence to make machine cells and part families for cell formation. A new similarity coefficient using weighted factors is introduced and an algorithm for formation of machine cells and part families is developed. A comparative study of two similarity coefficients - Gupta and seifoddini's method and proposed method - is conducted. A software program using TURBO C has been developed to verify the implementation.

• 대한산업공학회지
• /
• 제22권1호
• /
• pp.141-154
• /
• 1996

This paper presents a similarity coefficient based approach to the problem of machine-part grouping for cellular manufacturing. The method uses relevant production data such as part type, production volume, routing sequence to make machine cells and part families for cell formation. A new similarity coefficient using weighted factors is introduced and an algorithm for formation of machine cells and part families is developed. A comparative study of two similarity coefficient methods, Gupta and Seifoddini's method and the proposed method, is conducted.

• 천문학회보
• /
• 제36권2호
• /
• pp.51.1-51.1
• /
• 2011

We introduce new methods to measure distance in precision using large scale structure formation. The accuracy to determine geometrical factors is enhanced in comparison to the previous method known as BAO. We determine both D_A and H simultaneously as well as structure of growth of density fluctuations and peculiar velocities. Our method is independent of any given prior on large scale structure formation such as the shape of spectra.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.30-31
• /
• 2006

In a multi-action tooling system, which is usually used for the powder compaction process to fabricate the complex multilevel parts, crack formation is crucially detrimental and should be avoided. Among various process factors, tool shape is an important factor to prevent the crack formation during powder compaction process. In this work, the effects of different tool shapes were investigated through the experimental oberservation of pore distribution in real products and the finite element analysis of residual stresses. The results were interpreted based on non-uniform powder density in the compacted parts.

• 한국환경보건학회지
• /
• 제27권1호
• /
• pp.44-50
• /
• 2001

This study was carried out to investigate characteristics of water quality and THMs formation in lake-waters at kunsan. Of the parameters examined for water quality, pH, alkalinity, SO$_4$$^{-2}$ and Co- reflected the characteristics according to the origin, geography and water source of lakes while COD, SS, T-P, T-N and chlorophyll-a corelatively reflected well the influence of pollution factors around factors around lakes. The result of water quality analysis showed that most lakes in Kunsan area have the severe eutropnication problem, especially in summer. In lake-waters, THMFP overally continued to increase until 48 hour with the reaction time and THMs formation was largely achieved within 24 hour of the reaction time. The average formation ratio were 68.2% for CHCl$_3$, 23.6% for CHCl$_2$Br, 7.6% for CHClBr$_3$ and 0.6% for CHBr$_3$respectively and much difference depending on the reaction time was not shown. Overally, 96h-THEFP levels in lakes were high during June~September and showed higher tencency in lakes where could be regarded more contaminated on the whole. These results suggest that THMFP may be available for the management of lake-water quality as one if the useful parameters for the general evaluation of contamination. 96h-THEMFP failed to show the strong corelation individually with pH, TOC, COD and chlorphyll-a.