• Analytical Science and Technology
• /
• v.12 no.3
• /
• pp.260-264
• /
• 1999

A simple and rapid procedure, called FoLT-PCR(Formamide Low Temperature-Polymerase Chain Reaction) was applied to amplifying DNA directly from various forensic biological evidences including human blood, saliva, hair root, or semen without any DNA preparative steps. We added washing step with non-ionic detergent, 1% Triton X-100, and used Taq DNA polymerase instead of Tth DNA polymerase to amplify 3 STR loci and gender allele simultaneouly. Optimal concentration of formamide and annealing temperature were determined empirically to 8%(v/v), and $48^{\circ}C$ respectively. We also compared this method with standard PCR.

• Journal of the Korean Ceramic Society
• /
• v.30 no.3
• /
• pp.169-174
• /
• 1993

The porous silica glass prepared by the sol-gel method from the mixed solution of Si(OCH3)4, H2O, HCl and CH3OH with HCONH2 as a DCCA (Drying Control Chemical Additives). For investigation the characteristics of gels and glasses, we examined gels and glasses using TG-DTA, XRD, IR, SEM and porosimeter. The more content of formamide in the mixed solution increased, the more pore size and porosity of gel increased. In the excess formamide added gel, the properties of pore of gel were not so changed. The porous silica glass was prepared from the dry gel after heat treatment at 75$0^{\circ}C$. Porosity and mean pore size of the porous silica glass was 17~25% and 40~60$\AA$ relatively.

• BMB Reports
• /
• v.31 no.4
• /
• pp.405-408
• /
• 1998

Endonuclease-sensitive sites detected by T4 endonuclease V or UvrABC nuclease treatments were compared in the dihydrofolate reductase gene of UV-irradiated Chinese hamster ovary B-11 cells. The number of endonuclease-sensitive sites detected by T4 endonuclease V treatment followed by NaOH denaturation was twice that of formamide denaturation. Repeated treatment of damaged genomic DNA with T4 endonuclease V resulted in no further increase in the number of endonuclease-sensitive sites detected. The numbers of endonuclease-sensitive sites detected by UvrABC nuclease using each denaturation condition were similar. Sequential treatment with the two endonucleases using formamide denaturation resulted in twice the number of endonuclease-sensitive sites detected by treatment of each nuclease alone. Due to a lack of AP endonuclease activity these results suggest the presence of T4 endonuclease V-sensitive sites which could be complemented by alkaline gel separation or by UvrABC nuclease treatment.

• Proceeding of EDISON Challenge
• /
• 2014.03a
• /
• pp.141-155
• /
• 2014

Peptide bond hydrolysis는 세포 내외의 생화학반응에 있어서 핵심이다. 하지만 amide Hydrolysis Mechanism은 아직 명확하게 규명되지 않았다. pH가 중성인 물에서의 비 촉매 가수분해가 발생하는 몇몇 실험적 증거가 있지만, 해당 반응 매커니즘은 4 가지(non-assisted concerted, non-assisted step-wise, assisted concerted, assisted step-wise)로 여전히 논란이 있다. 이번 연구에서는, Formamide의 가능한 Hydrolysis Mechanism을 자세히 연구해보고자 한다. 먼저, Ab-initio 계산을 통해 4가지 반응 메커니즘의 다시 한번 확인하고, quantum chemical calculations과 quantum mechanical molecular dynamic이 결합된 (QMMD) simulation을 통하여 water solvent에서의 반응 메커니즘의 에너지관계를 규명하였다. 결론적으로 아직 계산이 끝나지 않은 supported concerted mechanism을 제외한 모든 계산에서 non-supported, supported 두 system 모두에서 step-wise가 일어나기 쉬웠고, non-supported 보다 supported mechanism이 선호됨을 보였다. Intermediate인 amino-gem-diol의 수용액 상에서 안정화 또한 나타났다. 이는 Ab-initio 계산만 통해서는 정확하게 산출할 수 없는 엔트로피의 영향을 잘 보여준다.

• YAKHAK HOEJI
• /
• v.36 no.5
• /
• pp.433-439
• /
• 1992

For the synthesis of tuberin derivatives, N-(disubstituted styryl) carboxamides, the series of cinnamic acids were transformed through chlorides, azides to isocyanates. And then isocyanates were reduced separately by Dibal and Grignard reagent. As a result of antimicrobial susceptibility test, N-(3,4-dichlorostyryl) formamide and N-(3,4-dichlorostyrl) acetamide showed comparatively large activity against some bacteria that is, MIC was respectively 50 ppm, $6.25{\sim}50\;ppm$. MIC of other derivatives was similiar to that of tuberin, about 100.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.10 no.3
• /
• pp.71-81
• /
• 1986

In order to control the formaldehyde release from D.P. finished fabric, cotton fabric was padded in DMDHEU resin bath containing either $Zn(NO_3)_2$ or $MgCl_2$ catalyst and a form-aldehyde scavenger like Glycerol, Sorbitol, Formamide, Polyvinyl alcohol (PVA, n= 2000) or diols, then dried and cured. The results are as follows : 1. When Lewis acid catalyst like $Zn(NO_3)_2$ or $MgCl_2$ was added in pad bath, the fabric finished with $Zn(NO_3)_2$ catalyst released the lower formaldehyde than with $MgCl_2$. 2. When the effect of pad bath pH was examined with varying the kinds of catalyst and the scavenger, it was found that the pad bath pH influenced on the amount of formaldehyde release and the optimum pad bath pH is at 4.3. Especially, in case of finishing at pad bath pH 4.3 with adding Formamide, the amount of formaldehyde release was decreased by about $45\~$35\%$ with $Zn(NO_3)_2$, while by about $20\~$45\%$ with $MgCl_2$ catalyst. In case of varying the concentration of a scavenger (Formamide), $1\%$ concentration of a scavenger was found to be the optimum level ana the higher the curing temperature up to $180^{\circ}C$, the lesser the amount of formaldehyde release were observed. 3. When the diol was used as scavenger, the amount of formaldehyde release was decreased by about $40\~$50\%$, but the longer the intramolecular length between OH groups, the lessor the amount of decrease of formaldehyde release were observed. 4. When the mixture of scavengers (Formamide and Glycerol) was added in the pad bath, .synergistic effect on formaldehyde release between the two scavengers wasn't observed. 5. The tensile strength of the resin finished fabric was reduced with increasing the pad lath pH and was influenced by the kind of scavengers, and the tensile strength was severely reduced when scavengers, especially Formamide, was added. The wrinkle recovery property is generally improved by resin finish on cotton fabric. When Formamide was added, the wrinkle recovery property is slightly decreased compared with that of the fabrics resin finished without a scavenger, and when polyol was added, the wrinkle recovery property showed almost no change.

• Journal of the Korean Institute of Gas
• /
• v.20 no.2
• /
• pp.35-42
• /
• 2016

Formamide is a colorless fluid with ammonia odor, and irritable when inhaled. It has $LD_{50}$ value of > 5,577 mg/kg in rats for acute oral toxicity and NOAEL of 113 mg/kg/day for target organ (liver) of whole body toxicity. It is also known as reproductive toxicant (1B) and TWA(Time Weighted Average) for it is 10 ppm. Workplace measurements of work places dealing with formamide showed the ppm of all 25 samples was very lower than WEL. However, the exposure concentration can change, depending on workplace condition such as the intensity of work, operating local ventilation system, and wearing protection equipment (Respirators). Therefore, considering it with the risk of whole body toxicity and reproductive toxicity, exposure quantity of each imaginary scenario was calculated at 5.16, 1.72, and $0.43mg/m^3$. The average value was calculated at 0.02-0.58, 0.02-0.66 at 90 percent of cumulative distribution, 0.02-0.69 at 95 percent of cumulative distribution. Therefore, it was generally evaluated to be safe because all values were below 1. However, caution is required to prevent health hazard because it has hepatotoxicity and reproductive toxicity and risk of a high level momentary exposure, depending on the condition of workplace.

• Journal of the Korean Ceramic Society
• /
• v.28 no.6
• /
• pp.488-494
• /
• 1991

In this study, the effects of catalyst and DCCA content were investigated in order to determine the optimum conditions of monolithic silica gel formation through sol-gel process. Formamide, oxalic acid, glycerol and dimethylformamide are used as DCCA. To observe the phenomena in drying and heat-treating of gels, we examined structural exchange of gels using FT-IR, TG-DTA and XRD. Monolithic gels were obtained by adding formamide and dimethylformamide as DCCA. According to the heat treatment schedule, silica glass is prepared by heat-treatment up to 1050$^{\circ}C$.

• Biomedical Science Letters
• /
• v.2 no.2
• /
• pp.241-247
• /
• 1996

Poor yields of amplified DNAs could be resulted in polymerase chain reaction(PCR) processes with G+C-rich DNA primers because of their high $T_m$ values. To maximize the yields of amplification in PCR processes with G+C-rich primers, we compared the yields of amplified DNA fragments according to the concentrations of specific denaturants added to the reaction mixture of PCR system. With addition of the mixture of 2.5% glycerol and 1.25% formamide, or 2.5% dimethyl sulfoxide to the reaction cocktail, respectively, remarkable increases in the yields of amplified DNA fragments were not observed in the PCR systems with G+C-low primers of Lyl chromosomal gene from Borrelia burgdorferi but observed in the PCR system with G+C- ich primers of Is900 gene from Mycobacterium parahberculosis. Although we were not practically able to discriminate the yields of PCR DNAs according to the concentrations used in this study, addition of the mixture of 5% glycerol and 2.5% formamide, or 5% DMSO tended to increase the production of extra bands.

• Korean Journal of Soil Science and Fertilizer
• /
• v.48 no.3
• /
• pp.180-188
• /
• 2015

To investigate the tendency of $Li^+$ exchange from polar organic solvents, $Li^+$-ion exchange into zeolite Y (Si/Al = 1.56) was attempted by undried methanol (crystal 1) and formamide (crystal 2) solvent. Two single crystals of Na-Y were treated with 0.1 M LiNO3 in each of the two solvents at 323 K, followed by vacuum dehydration at 723 K. Their structures were determined by single-crystal synchrotron X-ray diffraction techniques in the cubic space group $Fd{\bar{3}}m$, at 100(1) K. In both structures, $Li^+$ for $Na^+$ ions filled preferentially sites I' and II. The remaining $Na^+$ ions occupied sites I', II, and III' in both structures, in additional to above sites, and $Na^+$ ions occupied site I in crystal 2. While the 68 % exchange of $Li^+$ for $Na^+$ was achieved from undried methanol, only 40 % exchange was observed from undried formamide, indicating that the undried methanol was more effective than undried formamide as solvent for $Li^+$ exchange under the conditions employed.