• Journal of the Korean Society of Safety
• /
• v.29 no.5
• /
• pp.29-34
• /
• 2014

The live line working is inherently dangerous as the workers have to work under the risk of electrical shock and most of works are carried out at height. The live line working need the some specific techniques and higher level safety measures such as a risk assessment to carry out works safely, but the electrical construction companies performed live-line working are usually small-sized companies. They have less capacity to have own safety management system. This study intended to conduct an in-depth analysis on the cause of electric shock accidents to provide basic data for policy proposing taking into considering the past eleven years for a long-term plan. And the aim of this study is to propose the policy about the equipment performance standards and/or worker's safety standards to revise the standards for preventing electric shock accidents, moreover, co-relation of the electrical work order form and on safety workings, especially electrical construction company/work.

• Health Policy and Management
• /
• v.13 no.1
• /
• pp.46-68
• /
• 2003

In the model tested here, individual innovative work behavior is considered as the outcome of two antecedent factors-empowerment and organizational supports. The relationships between those variables and innovative work behavior are analyzed form the data collected through a questionnaire survey of 389 employees in five general hospitals. Results of multiple regression analyses show that three dimensions of empowerment-meaning, competence, and impact, and supports from organizational culture have significant effects on innovative work behavior whereas the effects of choice dimension of empowerment and managerial supports are not significant. These results emphasize the importance of empowerment and innovation oriented organizational culture for individual members' innovative work behavior. Theoretical and practical Implications and suggestions for future research are discussed.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2003.05a
• /
• pp.157-160
• /
• 2003

In order to reduce the construction cost and period without degrading the quality, construction companies are making a lot of efforts to prefabricate and mechanize the construction process, and introducing and utilizing various techniques of construction time management in the process of construction. However, due to the various factors (such as weather conditions, labor factors, supply of equipment and materials, safety accident, etc) in the process of construction, construction projects are not frequently completed within the scheduled Period. This research is to examine the current status of construction time management and factors causing delay in construction with regard to the concrete work (such as form work, steel reinforcement, and concrete work) in building apartments.

• Proceedings of the Safety Management and Science Conference
• /
• 2004.05a
• /
• pp.33-39
• /
• 2004

The chemical factory deals with dangerous element and more advance, human-error analyzes and becomes effective research for the country and region, this paper analyes the form of work-miss on human-error according to a safety accident for domestic chemical factory from 1999-2002. It include the present contents and raise issues human knowledge, behavior, judgment, sensibility as an important counterplan that makes the safety solution of work miss. For the point of view of human knowledge, it takes color standard for works to be effective in work place. for behavior, the test has been for risk point of work place and infra worker movement, also the workers performed professional work as classify according to work. for judgement, the valuation sheet is reflected to minimize the human -error and the 3rd supervisor does a cross-check audit beforehand. For sensibility, it is applicable for human relations, information, communication by program to the consciousness and an attitude of worker-supervisor.

• The Journal of the Korea Contents Association
• /
• v.21 no.3
• /
• pp.88-102
• /
• 2021

This study focused on the museums mainly holding permanent exhibitions except for the function of special exhibition in museum architectural works. This study aimed to draw the possibility to establish the relation between architectural form and central space of museums, by applying the forms like formal form, informal form, segment form, and diagonal form shown through a case study to total 164 work cases, reclassifying the architectural form into informal form, formal form, semi-formal form, segment form, diagonal form, and linear form, and then analogizing the matter of correlation between architectural form and central space of museums. The relevant contents could be summarized as follows. overall, most of the central spaces according with the informal architectural form of museums were the informal form, which showed 92.7% distribution rate. overall, there were many cases of informal architectural form of museums. Compared to the formal form, the informal architectural form showed the higher correlation with central space. The informal architectural form of museums is estimated to be continuously developing in the future. This study aims to present the basic data aiming for interior architecture design by considering the correlation between central space and architectural form.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.6 no.4
• /
• pp.130-137
• /
• 1997

The demand for wire-cut EDM is increasing rapidly in the die and tool making industry. In this study machining characteristics such as machining rate, surface roughness, hand drum form and hardness of machined material are investigated experimentally under the conditions varing pulse on time, pulse off time, peak voltage, wire tension after fixing other conditions in SKD 11 and brass and brass workpiece. It was found that various operating conditions had significant influences on machining characteristics. But the hardness of workpiece was uneffected by operating conditions. Also it was obtained experimentally that brass workpeice had better machinability than SKD 11 one.dition according to the current(Ip) in an electric spark machine : 1) Electrode is utilized Cu and Graphite. 2) Work piece is used the material of carbon steel. The condition of experiment is : 1) Current is varied 0.7(A) to 50(A) and the time of electric discharging to work piece in each time is 30(min) to 60(min). 2) After the upper side of work piece was measured in radius(5$\mu$m) of stylus analyzed the surface roughness to ade the table and graph of Rmax by yielding data. 3) Electro wear ratio is : \circled1Cooper was measured ex-machining and post-machining by the electronic balance. \circled2The ex-machining of graphite measured by it, the post-machining was found the data from volume $\times$specific gravity and analyzed to made its table and graph on ground the data. 4) In order to keep the accuracy of voltage affected to the work piece was equipped with the A.V. R and the memory scope was sticked to the electric spark machine. 5) In order to preserve the precision of current, to get rid of the noise occured by internal resistance of electric spark machine and to force injecting for the discharge fluid , it made the fixed table for a work piece to minimize the work error by means of one's failure during the electric discharging.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.446-449
• /
• 2003

Recently, large residental buildings including high-rise apartment and a multi-business and commercial-residential building are appearing in the form of Korean construction work. According to this large-size trend a tenn and cost of construction works was largely increased. Therefore, studies of techniques construction management for successful project are lively being progressed. This study introduced Just-In-Time form and Lean Construction concept in order to establish management system of a house construction work taking up much portion on aspects of work scale and materials transportation in finishing works of high-rise residental building architecture. The process of house construction works will be analyzed with these two principles for productivity improvement and then the improvement plan will be suggested. This analysis and proposal can induce the flow of finishing works smoothly and contribute to success of project through saving of a tenn and cost of construction works.

• Conservation Science in Museum
• /
• v.14
• /
• pp.29-35
• /
• 2013

In cases, such as white porcelain with openwork lotus scroll design, where the ceramics has intricate form and decorations, we normally use casts to restore the work, in that current restoration materials have short molding time which causes difficulties in delicate work. However, since using a cast for restoration requires longer work-time and uses more materials, we decided to restore in direct. Since the molding time in the restoration material is closely related to the workability, restoration material which secures longer work hours is necessary when directly restoring a complex form of body. Therefore we experimented on the work-time, color variation and workability as time passes by making mixtures of Epoxy putty and Baked clay in different ratios. As a result of the experiment, the mixture ratio of OS8:RQ2 turned out to be the most effective ratio.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.11a
• /
• pp.785-788
• /
• 2004

In order for concrete as a basic material constituting reinforced concrete structure to meet the required performance, it is necessary to satisfy various requirements in concrete construction. Among them, form work has significant effects not only on the process of molding fresh concrete but also on the quality and performance of hardened concrete. Recently, the decrease and aging of form workers is becoming a great problem in the construction industry and, as a result, it is required to rationalize form works and reduce labor costs for employing form workers.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.11a
• /
• pp.6-7
• /
• 2021

Although the development of free-form architectural technology continues, it consumes a lot of money and time due to the one-time formwork and the difficulty of maintaining quality due to manual work. To this end, in this study, a shape connection technique was proposed and verified to improve the limitations of implementing the curved surface of the existing lower multi-point press. In order to improve the accuracy of the shape, a curved surface was implemented using a silicon cap and a silicon plate. As a result of the error analysis of the shape, a small value of less than 3 mm was found. This study can implement more accurate curved surfaces than conventional technologies and produce high-quality free-form panels.