• 한국초전도ㆍ저온공학회논문지
• /
• 제17권1호
• /
• pp.6-9
• /
• 2015

For many applications of $ReBa_2Cu_3O_{7-x}$ (ReBCO) tapes it is needed to know the anisotropic properties of the used conductor in a broad range of magnetic field. In this paper we present the results of transport measurements on the SuNAM tape (GdBaCuO) with the rotation of the sample in magnetic fields up to 5 T in liquid nitrogen. The critical current over the magnetic field orientation ($I_c({\theta})$) curves demonstrate the appearance of distinct second peak around c-axis in low fields. This peak almost vanishes in the fields over 3 T. The evolution of the ab-peak form is also presented: the peak consistently reduces its height with the magnetic field going up and in the high fields the shoulders rise, changing the type of the distribution. To describe experimental curves the vortex path model was applied to the angular distributions of the critical current in magnetic field. Good agreements of the experimental data with the analytical expressions were obtained that confirm the vortex path model approach.

• 천문학회지
• /
• 제37권4호
• /
• pp.225-232
• /
• 2004

Shocks are ubiquitous in astrophysical environments and cosmic-rays (CRs) are known to be accelerated at collisionless shocks via diffusive shock acceleration. It is believed that the CR pressure is important in the evolution of the interstellar medium of our galaxy and most of galactic CRs with energies up to ${\~}\;10^{15}$ eV are accelerated by supernova remnant shocks. In this contribution we have studied the CR acceleration at shocks through numerical simulation of 1D, quasi-parallel shocks for a wide range of shock Mach numbers and shock speeds. We show that CR modified shocks evolve to time-asymptotic states by the time injected particles are accelerated to moderately relativistic energies, and that two shocks with the same Mach number, but with different shock speeds, evolve qualitatively similarly when the results are presented in terms of a characteristic diffusion length and diffusion time. We find that $10^{-4} - 10^{-3}$ of the particles passed through the shock are accelerated to form the CR population, and the injection rate is higher for shocks with higher Mach number. The time asymptotic value for the CR acceleration efficiency is controlled mainly by shock Mach number, and high Mach number shocks all evolve towards efficiencies ${\~}50\%$, regardless of the injection rate and upstream CR pressure. We conclude that the injection rates in strong quasi-parallel shocks are sufficient to lead to significant nonlinear modifications to the shock structures, implying the importance of the CR acceleration at astrophysical shocks.

• The Korean Journal of Ceramics
• /
• 제4권4호
• /
• pp.304-310
• /
• 1998

Carbothermal reduction has been one of the important processes for the production of ceramic raw materials such as silicon carbide, silicon nitride, boron carbide, etc. The process has also been one of several trials for the recovery of ZnO from ZnO-containing waste. It usually involves two consecutive steps: the evolution of Zn vapor and its oxidation with air. In this study a ZnO-containing raw material is reduced by carbon at $1250^{\circ}C$ and the evolved Zn vapor is oxidized with air, resulting in fine powders of ZnO. computer programs, THERMO and PYROSIM developed by MINTEK, are used to simulate the process thermodynamically and the results are compared with the experimental results. It is shown that the ZnO-containing raw material can be reduced and can form fine ZnO with the yield as high as 98.7% under a proper condition. Based on these results, a process is engineered for the production of ZnO in a rotary kiln at a rate of 3 tons/day. The produced ZnO powders show properties suitable to the usual applications in ceramic industries with a purity of > 95wt% and an average particle size of ∼3${\mu}m$.

• Journal of Information Technology Applications and Management
• /
• 제24권4호
• /
• pp.215-227
• /
• 2017

The development of information technology are leading to the rapid evolution of SNS (Social Networking Services) in various directions and industries. Initially, SNS have been used as the form of networking between user's groups. Currently SNS has been developed towards multiple purposes and platforms such as the promotion and the advertising of a company. There are many SNSs including QQ, Weibo, and Wechat and so on in China. However, the use of companies in terms of advertising and information sharing with the customers do not meet the trend in China. Especially, there were little researches for Chinese travel agencies how to utilize SNS for attracting new customers and making them contribute to the firm's performance. In this study, we try to investigate the impact of the firm's characteristics and the usage of SNS on the performance of Chinese travel agencies. Based on Top 100 China travel agencies in 2009, we analyzed the relationships between firm's characteristics and the usage of SNS, and firm's performances in 2013. We expect that our study can contribute to the increasing academic and practical needs on the empirical evidence of the impacts of the SNS utilizations on the firm's performance.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2007년도 제28회 춘계학술대회논문집
• /
• pp.233-237
• /
• 2007

최근의 실험 결과에 의하면 하이브리드 로켓 연료의 표면에 연소가 진행되지 않은 채 남아있는 점들이 존재함을 확인하였다. 이러한 불규칙적인 spot은 연료의 기화로 인한 분출유동(blowing effect)과 산화제의 유동 사이에서 발생하는 교란에 의한 현상인 것으로 여겨진다. 본 연구에서는 LES를 이용하여 분출이 있을 때 channel 유동을 해석함으로써 연료 표면으로 전달되는 열전달 특성을 해석하였다. 비록 원형 그레인이 아니며 화학반응을 무시하고 열전달을 계사하였으나 근본적으로 연료 표면에서 발생하는 불규칙한 spot의 발생은 작은 크기의 난류 eddy의 존재 때문인 것으로 판단된다.

• Nuclear Engineering and Technology
• /
• 제46권6호
• /
• pp.773-782
• /
• 2014

The general path model (GPM) is one approach for performing degradation-based, or Type III, prognostics. The GPM fits a parametric function to the collected observations of a prognostic parameter and extrapolates the fit to a failure threshold. This approach has been successfully applied to a variety of systems when a sufficient number of prognostic parameter observations are available. However, the parametric fit can suffer significantly when few data are available or the data are very noisy. In these instances, it is beneficial to include additional information to influence the fit to conform to a prior belief about the evolution of system degradation. Bayesian statistical approaches have been proposed to include prior information in the form of distributions of expected model parameters. This requires a number of run-to-failure cases with tracked prognostic parameters; these data may not be readily available for many systems. Reliability information and stressor-based (Type I and Type II, respectively) prognostic estimates can provide the necessary prior belief for the GPM. This article presents the Bayesian updating framework to include prior information in the GPM and compares the efficacy of including different information sources on two data sets.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2007년도 정기 학술대회 논문집
• /
• pp.3-17
• /
• 2007

This paper provides an introduction to life-span simulation and numerical approach to support the performance design processes of reinforced concrete structures. An integrated computational system is proposed for life-span simulation of reinforced concrete. Conservation of moisture, carbon dioxide, oxygen, chloride, calcium and momentum is solved with hydration, carbonation, corrosion, ion dissolution. damage evolution and their thermodynamic/mechanical equilibrium. Coupled analysis of mass transport and damage mechanics associated with steel corrosion is presented for structural performance assessment of reinforced concrete. Multi-scale modeling of micro-pore formation and transport phenomena of moisture and ions are mutually linked for predicting the corrosion of reinforcement and volumetric changes. The interaction of crack propagation with corroded gel migration can also be simulated. Two finite element codes. multi-chemo physical simulation code (DuCOM) and nonlinear dynamic code of structural reinforced concrete (COM3) were combined together to form the integrated simulation system. This computational system was verified by the laboratory scale and large scale experiments of damaged reinforced concrete members under static loads, and has been applied to safety and serviceability assessment of existing structures. Based on the damage details predicted by the nonlinear finite element analytical system, the life-span-cost of RC structures including the original construction costs and the repairing costs for possible damage during the service life can be evaluated for design purpose.

• Journal of Ubiquitous Convergence Technology
• /
• 제2권1호
• /
• pp.51-55
• /
• 2008

A digital home is a ubiquitous environment that is expected to be realized in the near future. All information appliances in a house are connected to each other through wired and/or wireless home networks. Authenticated user can access the various services provided by the digital home, and the access is not restricted by equipment, time, or location. The technologies that form the digital home can be grouped into two categories: wired networking technologies and wireless networking technologies. For the purpose of ubiquitous environments, wireless-networks offer suitable and seamless high-quality services. A wireless LAN can be created simply by equipping a single access point. For that reason, the cost of establishing such a network is low and using it is easy. Of course, there is an exciting new wireless technology. It is the Ultra Wide Band (UWB). However, it is not enough to bring wireless convenience, although offering a broad range of high-speed data transfer capabilities, Because of unstable. Thus, of the wireless-networking systems, we focus on the wireless LAN. We quantitatively analyze its capabilities. The dynamic and adaptive wireless LAN provides a foundation for the evolution toward the next generation of wireless and adaptive networks. The difference between wired LAN and wireless LAN in upload and download rates is small. Although the wireless LAN experiences a greater loss rate than the wired LAN, the difference is minimal. We conclude that a wireless LAN is suitable for use in an apartment environment.

• 한국게임학회 논문지
• /
• 제11권6호
• /
• pp.149-158
• /
• 2011

본 논문은 게임 산업의 시작을 열었던 아케이드 게임의 유형과 특징에 대한 것이다. 아케이드 게임기는 크게 '기계식 게임기', '전기 기계식 게임기', '비디오 아케이드 게임기'로 진화해왔다. 이러한 진화과정에서 아케이드 게임은 다른 게임 플랫폼과는 차별화되는 자신만의 특징을 갖게 된다. 그 특징은 '공간성', '시간성', '게임성의 원형', '단순한 인터페이스', '공연성'이다. 최근 아케이드 게임의 침체는 이러한 아케이드 게임만의 특징들이 다른 게임으로 전이되면서 차별성이 퇴색되었기 때문이다. 그 특징을 다시 발굴하여 강화시킨다면 다시 게이머들를 사로잡을 수 있는 아케이드 게임을 만들 수 있을 것이다.

• International Journal of Concrete Structures and Materials
• /
• 제11권2호
• /
• pp.261-273
• /
• 2017

The control of the deformative behaviour of pre-stressed concrete roof elements for a satisfactory service performance is a main issue of their structural design. Slender light-weight wing-shaped roof elements, typical of the European heritage, are particularly sensitive to this problem. The paper presents the results of deformation measurements during storage and of both torsional-flexural and purely flexural load tests carried out on a full-scale 40.5 m long innovative wing-shaped roof element. An element-based simplified integral procedure that de-couples the evolution of the deflection profile with the progressive shortening of the beam is adopted to catch the experimental visco-elastic behaviour of the element and the predictions are compared with normative close-form solutions. A linear 3D fem model is developed to investigate the torsional-flexural behaviour of the member. A mechanical non-linear beam model is used to predict the purely flexural behaviour of the roof member in the pre- and post-cracking phases and to validate the loss prediction of the adopted procedure. Both experimental and numerical results highlight that the adopted analysis method is viable and sound for an accurate simulation of the service behaviour of precast roof elements.